Owner manual

29
English
SETTING UP YOUR TV
If the Standby Channel Update is set to On, when the TV
is in Standby, Digital Tuning is automatically executed.
a Select DTV Settings from the Installation menu
and press OK.
b Press b to select Standby Channel Update and
press
c and B / b to select On or Off.
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
using the television for displaying in a shop, etc.
a Select Location from the Installation menu.
b Press c or OK to edit Location and press B / b
to select Home or Store.
This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new digital
services.
This ‘switch-off’ will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is re-
tuned to ensure that existing and new digital services can
be viewed without disruption.
You can copy channel information from TV to USB
memory and edit the channel information by using your
PC and updates channel information to your TV.
a Select DTV Settings from the Installation menu
and press OK.
b Press B / b to select Data Transfer and press c
and
B / b to select Channel List, Transponder
Table (if available) or Preset Order.
c In case of Channel List and Transponder Table,
press
c to select USB to TV or TV to USB. In case
of Preset Order, select USB to TV.
Standby Channel Update
Location setting
Analogue switch-off
Data Transfer