Owner manual

32
English
CONTROLS AND FEATURES
This feature is effective only the selection of Standard in
Sound Mode.
a In the Advanced Sound Settings menu, press
B / b to select Surround and press c and B / b
to select Off, TruSurround or Depth Rendering.
TruSurround: High quality surround sound and
expanded sound field over two speakers.
Depth Rendering: Near and far depth sound field for a
greater sense of immersion.
When the note box appears, press OK to enable Sound
Separation. When activated, this feature allows you to
emphasize either the dialogue or the background sound.
You can do so by adjusting the value on the slider bar.
The closer the value is to the position, the more the
dialogue is emphasized and the lower the background
sound level.
a In the Sound menu, press B / b to select Sound
Separation Effect and press OK. The selection
bar will be displayed.
Press
C / c to select value.
NOTE:
• This setting is temporary. When you switch the TV to
standby, or change the channel or external input, the
value is restored to the previous setting.
• Sound Separation has been designed for private use
and entertainment in your home environment. Please
note that any unlawful use, including public and/or
commercial use, could lead to copyright infringement of
the holder's rights. Toshiba asks you to respect the
intellectual property rights of third parties.
• The effect of Sound Separation depends on the content
used.
• If the content is mono, there may be little effect.
• Sound Separation may amplify the noise that is included
in the content.
• The volume may wobble when you enable Sound
Separation.
• Sound Separation takes a few seconds to exert after
enabling it, changing content and changing volume.
• Sound Separation may not work with some applications.
Consistent volume, despite volume spikes or changes in
content sources.
When TV Speaker is On, you can set TruVolume to On
or Off.
a In the Sound menu, press B / b to select
TruVolume.
b Press c and B / b to select On or Off.
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).
a In the Sound menu, press B / b to select
Dynamic Range Control.
b Press c and B / b to select On or Off.
a In the Sound menu, press B / b to select
Balance and press
C / c to emphasize left and
right speaker balance.
If a programme or film is being broadcast with a
soundtrack in more than one language, the Dual feature
allows selection between them.
a Press and B / b to highlight Sound icon.
b Press c and B / b to select Dual and press c and
B / b to choose between Dual 1 or Dual 2.
Surround
Sound Separation Effect
TruVolume™
Dynamic Range Control
Balance
Dual
< Sound
Sound Navi Stand
Sound Mode Standard
Advanced Sound Settings
Sound Separation Effect 1
TruVolume Off
Dynamic Range Control On
Balance 0
Dual Dual 1
Audio Level Offset
TV Speakers On
Headphone Level
Audio Description