Owner manual

78
English
CONTROLS AND FEATURES
Adjusting the Sampling Clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
a In the Display Settings menu, press B / b to
select PC Settings and press OK.
b Press B / b to select Sampling Clock.
c Press C / c to adjust until the picture clears.
Use Reset to return all items to the original factory
settings.
a In the Display Settings menu, press B / b to
select PC Settings and press OK.
b Press B / b to select Reset and press OK.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Input selection and AV
connections
See page 8 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through
the SCART lead to switch the television to the correct
Input socket.
Alternatively, press the external source selection button
o until the picture from connected equipment is shown.
Use the Input Selection window if the television does not
switch over automatically.
a By pressing o on the remote control or TV, a list
will appear on screen showing all inputs and
external equipment.
HDMI
®
displays equipment connected to Input
HDMI on the back or side of the television.
PC displays a computer connected to Input RGB/
PC on the back of the television.
Sampling Clock
Reset
Input selection
Press o on the remote control
TV
o 1
o 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
Inputs
Press and hold p / o on the TV
DTV Ant
DTV Sat
o 1
o 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
ATV
Inputs