Owner manual

81
English
CONTROLS AND FEATURES
When Auto Standby is enabled, the television, when
switched off, will automatically switch off (Standby) all
connected HDMI CEC Control equipment.
a In the HDMI CEC Control Setup menu, press b
to highlight Auto Standby.
b Press c and B / b to select On or Off.
When Amplifier Control is set to On the connected
amplifier can be controlled by TV remote.
a In the HDMI CEC Control Setup menu, press b
to select Amplifier Control.
b Press c and B / b to select On or Off.
The Initial Speaker Setting allows to select TV speakers or
Amplifier speakers.
a In the HDMI CEC Control Setup menu, press b
to select Initial Speaker Setting.
b Press c and B / b to select TV Speakers or
Amplifier.
If an HDMI CEC Control device with HDMI switching
capability (e.g. AV amplifier) is connected to the HDMI
input, you can select another HDMI CEC Control device
that is connected to the master HDMI device on the input
source list.
a Press o and a list will appear on screen showing
available input sources.
b Press b to select the input source that the HDMI
CEC Control devices are connected.
c Press c and a second selection screen will appear
showing all connected HDMI CEC Control
equipment.
d Press B / b to select the desired input source,
and then press OK.
NOTE:
• These functions depend on the device connected.
If you select the HDMI CEC Control input source from
the popup window, some HDMI CEC Control devices
may automatically turn on.
• If the HDMI cable from connected equipment is
changed, Enable in the HDMI CEC Control Setup menu
may need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable HDMI
CEC Control item on the HDMI CEC Control Setup
menu from Off to On.
Auto Standby
Amplifier Control
Initial Speaker Setting
HDMI CEC Control input source
selection
TV
o 1
o 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
Inputs
1DVD
2 VCR/DVR
3 CBL/SAT
4GAME/TV
5 AUX