User Manual

35
English
CONTROLS AND FEATURES
You can adjust the level of 3D.
From the Menu:
a In the 3D menu, press B / b to select 2D to 3D
Depth and press OK.
b Press C / c to select 1, 2, 3, 4, or 5 and press OK.
The higher the number, the stronger the 3D effect.
From the Quick Menu:
a Press QUICK to open the Quick Menu.
b Press B / b to select 3D Settings and press OK.
c Press B / b to select 2D to 3D Depth and press
OK.
d Press C / c to select 1, 2, 3, 4, or 5 and press OK.
The higher the number, the stronger the 3D effect.
NOTE: Depending on the content, setting the 3D effect to
a high level may result in blurring of the image contours
and background.
A 3D PIN code is necessary for using 3D Safety Settings.
To enter a new PIN code:
a In the 3D menu, press B / b to select 3D PIN and
press OK.
b Press the number buttons to enter a 4-digit
number. Confirm the code.
NOTE: PIN code cannot be set to “0000”.
To change or delete your PIN code:
a In the 3D menu, press B / b to select 3D PIN and
press OK.
b Press the number buttons to enter your 4-digit PIN
code.
c Select Change PIN or Delete PIN and press OK.
NOTE:
• PIN code cannot be set to “0000”.
• If PIN is deleted, 3D Safety Settings is greyed
out, and the settings are reset to the factory
default.
When this feature is set to On, a message is displayed
onscreen when a 3D signal is received.
a In the 3D menu, press B / b to select 3D Safety
Settings and press OK.
b Enter your 4-digit 3D PIN code.
c Press B / b to select 3D Start Message.
d Press c and B / b to select On or Off.
When this feature is set to On, you must enter 3D PIN
code for changing display mode.
a In the 3D menu, press B / b to select 3D Safety
Settings and press OK.
b Enter your 4-digit 3D PIN code.
c Press B / b to select 3D Lock.
d Press c and B / b to select On.
When the 3D Timer Lock feature is set to On, neither the
PIN input window nor the 3D start message will be shown
while the 3D Enable timer is active, even if a switch to 3D
Mode occurs. This helps to avoid asking for the 3D Lock
PIN and displaying 3D start message every time when
switching to 3D.
NOTE: This feature cannot be selected until the 3D PIN is
set.
a In the 3D menu, press B / b to select 3D Safety
Settings and press OK.
b Enter your 4-digit 3D PIN code.
c Press B / b to select 3D Timer Lock.
d Press c and B / b to select On.
Adjusting 2D to 3D Depth
If you experience any abnormal sensation or feel fatigue
or nausea when viewing 3D images, stop watching and
rest until the symptoms subside. Before viewing again,
adjust the 3D effect to a lower number and view at a level
at which the symptoms do not occur.
Setting the 3D PIN code
Setting 3D Start Message
Setting 3D Lock
Setting 3D Timer Lock