Maintenance Manual

4.25 RTC battery 4 Replacement Procedures
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-75
Installing the RTC battery
To install the RTC battery, follow the steps below and refer to Figure 4-50.
1. Set the RTC battery into the insulator (RTC BATT INSULATOR).
2. Set the insulator (RTC BATT INSULATOR) to the slot.
3. Connect the RTC battery harness to the connector CN9300 on the sound board and
stick the glass tape in place.