User’s Manual Satellite E200 Series
Table of Contents Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi FCC information . . . . . . . . . . . . . . . . . . . . .
Satellite E200 Function button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyboard indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optical disc drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Satellite E200 Soft keys: FN key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Windows special keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keypad overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Generating ASCII characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 6 5-2 5-6 5-6 5-8 Power and Power-up Modes Power conditions . . . . . . . . . . . . . . . . . . . . . . . . .
Satellite E200 Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Satellite E200 xD-Picture Card is a trademark of FUJIFILM Corporation. Other trademarks and registered trademarks not listed above may be used in this manual. Safety instructions Use the following safety guidelines to help to protect yourself and your computer. When using your computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.
Satellite E200 FCC information FCC notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Satellite E200 EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CEmarking: Manufacturer: TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Germany.
Satellite E200 Following Information Is Only Valid for EU-member States Disposal of Products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005.
Satellite E200 ENERGY STAR® Program Your Computer model may be ENERGY STAR® compliant. If the model you purchased is compliant, it is labeled with the ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.
Satellite E200 Optical disc drive safety instructions ■ The drive employs a laser system. To ensure proper use of this product, please read this manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
Satellite E200 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
Satellite E200 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Preface Congratulations on your purchase of the TOSHIBA Satellite E200 series computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing. This manual tells you how to set up and begin using your Satellite E200 series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Satellite E200 Chapter 5, The Keyboard, describes special keyboard functions including the keypad overlay and hot keys. Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup, explains how to configure the computer using the HW Setup program. It also tells how to set a password.
Satellite E200 Display ABC Names of windows or icons or text generated by the computer that appear on its display screen are presented in the typeface you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
Satellite E200 ■ Dust, moisture, and direct sunlight. ■ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ■ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ■ Extreme heat, cold, or humidity. ■ Liquids and corrosive chemicals. Stress injury Carefully read the Instruction Manual for Safety and Comfort.
Satellite E200 Instruction Manual for Safety and Comfort All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer.
Chapter 1 Getting Started This chapter provides an equipment checklist, and basic information to start using your computer. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use.
Getting Started Software Windows 7 The following software is preinstalled: ■ Windows 7 ■ Bluetooth Driver (Can be used only for Bluetooth models) ■ Display Drivers for Windows ■ Fingerprint utility (Can be used only for Fingerprint utility models) ■ LAN Driver ■ Pointing Device Driver ■ Sound Driver for Windows ■ Corel DVD MovieFactory ■ Wireless LAN driver (Can be used only for Wireless LAN models) ■ TOSHIBA Assist ■ TOSHIBA ConfigFree ■ TOSHIBA Disc Creator ■ TOSHIBA DVD PLAYER ■ TOSHIBA Face Recognition
Getting Started Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer. By following the recommendations in it you may reduce your chance of developing a painful or disabling injury to your hand, arms, shoulders or neck.
Getting Started ■ Always use the TOSHIBA AC adapter that was included with your computer or use AC adapters specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adapter.
Getting Started 1. Connect the power cord to the AC adapter. Figure 1-1 Connecting the power cord to the AC adapter 2. Connect the AC adapter’s DC output plug to the DC IN 19V jack on the right side of the computer. 1.DC IN JACK Figure 1-2 Connecting the adapter to the computer 3. Plug the power cord into a live wall outlet - the Battery and DC IN indicators on the front of the computer should glow. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing.
Getting Started Figure 1-3 Opening the display panel ■ When opening the panel, please be careful not to force it beyond the point where it moves easily. ■ Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage. ■ Do not press or push on the display panel. ■ Do not lift the computer by the display panel. ■ Do not close the display panel with pens or any other objects left in between the display panel and the keyboard.
Getting Started 2. 3. Open the display panel. Press and hold the computer’s power button for two or three seconds. 1.POWER BUTTON Figure 1-4 Turning on the power Starting up for the first time When you first turn on the power, the computer’s initial screen is the Windows 7 Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of three modes:shut down (Boot) , hibernation mode or sleep mode.
Getting Started Hibernation mode The hibernation feature saves the contents of memory to the hard disk when the computer is turned off. The next time the computer is turned on, the previous state is restored. The hibernation feature does not save the status of peripheral devices. ■ While entering hibernation mode, the computer saves the contents of memory to the HDD. Data will be lost if you remove the battery or disconnect the AC adapter before the save is completed.
Getting Started You can also enable hibernation mode by pressing FN + F4 - please refer to Chapter 5, The Keyboard, for further details. Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the HDD/ODD/eSATA indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices.
Getting Started Executing sleep mode You can also enable sleep mode by pressing FN + F3. See Chapter 5, The Keyboard, for details. You can enter sleep mode in one of three ways: 1. Click Start, point to the arrow icon ( ), and then select Sleep from the menu. 2. Close the display panel. This feature must be enabled. Refer to the Power Options in the Control Panel. 3. Press the power button. This feature must be enabled. Refer to the Power Options in the Control Panel.
Getting Started System recovery options A hidden partition is allocated on the hard disk drive for the system recovery options. This partition stores files which can be used to repair the system in the event of a problem. System recovery options The system recovery options feature is installed on the hard disk when shipped from the factory. The system recovery options menu includes some tools to repair startup problems, run diagnostics or restore the system.
Getting Started A recovery image of the software on your computer is stored on the hard disk drive, and can be copied to either CD, DVD or USB Flash Memory by using the following steps: 1. Select either blank CD, DVD or USB Flash Memory. The application will allow you to choose from a variety of different media onto which the recovery image can be copied including CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW and USB Flash Memory.
Getting Started 2. 3. While holding down 0 (zero) key on the keyboard, turn on your computer. A menu appears. Follow the on-screen instructions. Restoring the preinstalled software from your creating recovery media If the pre-installed files are damaged, you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it.
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position. 1.WIRELESS COMMUNICATION SWITCH 2.WIRELESS LAN LED 3.3G LED* * DEPENDING ON THE MODEL YOU PURCHASED.
The Grand Tour Wireless communication switch Slide this switch toward the right of the computer to turn on wireless communication. Slide it toward the left of the computer to turn off the functions. Wireless LAN LED The wireless LAN LED glows orange when the wireless communication function is used. ■ Turn Wi-Fi and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device.
The Grand Tour Be careful not to block the fan vent. Also be careful to keep foreign objects out of the vents. A pin or similar object can damage the computer’s circuitry. Universal serial bus (USB 2.0) ports One universal serial bus (USB) ports comply with USB Serial 2.0 standards, which enables data transfer speeds 40 times faster than the USB 1.1 standards. (The ports also support USB 1.1) Keep foreign objects out of the USB connectors. A pin or similar object can damage the computer’s circuitry.
The Grand Tour Right side Figure 2-3 shows the computer’s right side. 1.eSATA/USB COMBO PORT 2.HDMI PORT* 3.USB PORT 4.BRIDGE MEDIA CARD SLOT 5.ODD BUTTON 6.OPTICAL DISC DRIVE * DEPENDING ON THE MODEL YOU PURCHASED. Figure 2-3 The right side of the computer eSATA/USB combo port One eSATA/universal serial bus (USB) combo port comply with USB 2.0 standards, which enables data transfer speeds 40 times faster than the USB 1.1 standards.
The Grand Tour Bridge media card slot This slot allows you to easily transfer data from devices, such as digital camera and PDA, that use flash memory (Secure Digital(SD)/Secure Digital High Capacity(SDHC)/Memory Stick(MS)/Memory Stick Pro(MS Pro)/MultiMediaCard(MMC)/xD-Picture Card (xD)). ODD button Press this button to eject the disc. Optical disc drive A DVD Super Multi (±R DL) drive. Back side Figure 2-4 shows the computer’s back side. 1.DC IN 19V 2.LAN JACK 3.EXTERNAL MONITOR PORT 4.
The Grand Tour Security lock slot A security cable attaches to this slot. The optional security cable anchors your computer to a desk or other large object to deter theft. Underside Figure 2-5 shows the underside of the computer. Make sure the display is closed before turning over your computer. 1.BATTERY RELEASE LATCH 2.BATTERY PACK 3.BATTEER PACK LOCK 4.COOLING VENTS 5.
The Grand Tour Cooling vents The cooling vents help keep the processor from overheating. Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system.
The Grand Tour User’s Manual Built-in microphone Records monaural sounds into your applications. Display screen*5 The full-color LCD displays high-contrast text and graphics. The computer's LCD is 14", 1366 horizontal x 768 vertical pixels. The computer has a Thin-Film Transistor (TFT) display. Refer to Appendix B, Display Controller. When the computer operates on power through the AC adapter, the display screen’s image will be somewhat brighter than when it operates on battery power.
The Grand Tour Fingerprint sensor Just by swiping the finger against the fingerprint sensor, the following functions will be enabled (Provided with some models): ■ Logon to Windows and access a securityenabled homepage through IE (Internet Explorer). ■ Files and folders can be encrypted/decrypted and third party access to them prevented. ■ Disable the password-protected screensaver when returning from power-saving (Sleep) mode. ■ Single Sign-On feature.
The Grand Tour Function button Available for use: eco, Wireless Display, Illumination On/Off, CD/DVD Play/Pause, Mute, Volume up and down. These buttons allow you to manage audio/video, run applications and access utilities. Refer to the Function button section in Chapter 4, Operating Basics for details. eco button Press this button to launch the TOSHIBA eco Utility. This button changes "On" and "Off" of eco Mode. When eco Mode is “On”, the icon turns green. When eco Mode is “Off”, the icon turns gray.
The Grand Tour Volume up button Press this button to increase the volume. Volume down button Press this button to decrease the volume. System indicators Figure 2-7 shows the system indicators, which light when various computer operations are in progress. 1.BRIDGE MEDIA CARD 2.HDD/ODD/eSATA 3.MAIN BATTERY 4.POWER 5.DC IN Figure 2-7 System indicators User’s Manual Bridge media card The Bridge media card indicator glows white when the computer is accessing the bridge media card.
The Grand Tour Main battery The Main battery indicator shows the condition of the charge. White means fully charged and orange means being charged. Refer to Chapter 6, Power and Power-up Modes. Power The Power indicator glows white when the computer is on. If you turn off the computer in sleep mode, this indicator blinks orange. If the computer shuts down, this indicator shows no light. DC IN The DC IN indicator glows when DC power is supplied from the AC power adapter.
The Grand Tour 1.NUMERIC MODE INDICATOR 2.ARROW MODE INDICATOR Figure 2-9 Keypad overlay indicators Numeric mode You can use the keypad overlay (dark gary labeled keys) for numeric input when the Numeric mode indicator lights green. Refer to the Keypad overlay section in Chapter 5, The Keyboard. Arrow mode When the Arrow mode indicator lights green, you can use the keypad overlay (dark gray labeled keys) as cursor keys. Refer to the Keypad overlay section in Chapter 5, The Keyboard.
The Grand Tour Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics. CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once. DVDs ■ DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only once.
The Grand Tour AC adapter The AC adapter converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any region. To recharge the battery, simply connect the AC adapter to a power source and the computer. See Chapter 6 Power and Power-up Modes for details.
Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer. The actual specifications may vary depending on the model you purchased. Processor*1 Built-in User’s Manual Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start -> All Programs -> TOSHIBA -> Utilities -> PC Diagnostic Tool.
Hardware, Utilities and Options Memory*2 Slots PC3-8500 or PC3-10600 1 GB, 2 GB or 4 GB memory modules are installed in the two memory slots of all models. Maximum system memory size and speed are depending on the model you purchased. Video RAM*6 Depending on the model you purchased. Mobile Intel® HM55 Express Chipset model/ Mobile Intel® HM57 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology.
Hardware, Utilities and Options DVD Super Multi (±R DL) drive User’s Manual Some models are equipped with a full-size DVD Super Multi (±R DL) drive module that allows you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adapter. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.
Hardware, Utilities and Options Keyboard Built-in 86 keys or 87 keys, compatible with IBM® enhanced keyboard, embedded numeric overlay, dedicated cursor control, and keys. See Chapter 5, The Keyboard, for details. Pointing device Built-in A touchpad and control buttons in the palm rest enable control of the on-screen pointer. Power Battery pack*3 The computer is powered by one rechargeable lithium-ion battery pack. RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar.
Hardware, Utilities and Options Slots Bridge media card slot This slot allows you to easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash memory Secure Digital (SD)/Secure Digital High Capacity (SDHC)/ Memory Stick (MS)/Memory Stick Pro (MS Pro)/MultiMediaCard (MMC)/xD-Picture Card (xD). See Optional Device in this chapter for details. Multimedia Web camera Record/Send still or video images with this integrated web camera.
Hardware, Utilities and Options Bluetooth Some computers in this series are equipped with Bluetooth functions. BluetoothTM wireless technology eliminates the need for cables between electronic devices such as computers and printers. BluetoothTM provides fast, reliable, and secure wireless communication in a small space. (Provided with some models) Wireless communication switch This switch turns wireless devices RF transmission (Wireless LAN and Bluetooth) functions on and off.
Hardware, Utilities and Options Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. To access the Power Options, click Start -> Control Panel -> System and Security -> Power Options. User’s Manual Hot keys Key combinations allow you to quickly modify the system configuration directly from the keyboard without running a system configuration program.
Hardware, Utilities and Options User’s Manual Low battery automatic hibernation mode When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters hibernation and shuts down. This can be specified in the Power Options. Heat dispersal To protect from overheating, the CPU has an internal temperature sensor. If the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered.
Hardware, Utilities and Options USB Sleep and Charge function*8 This feature allows you to charge USB compatible external devices such as mobile phones or portable digital music players via the USB port when your computer is in Sleep Mode, Hibernation Mode or in the shutdown state. This function is worked by the USB Sleep and Charge Utility.
Hardware, Utilities and Options TOSHIBA Zooming Utility This utility allows you to enlarge or reduce the icon size on the Windows Desktop, or the zoom factor associated with specific supported applications. TOSHIBA PC Diagnostic Tool The TOSHIBA PC Diagnostic Tool will display basic system configuration information and allow the functionality of some of the computer’s built-in hardware devices to be tested. TOSHIBA Flash Cards This utility supports the following functions.
Hardware, Utilities and Options ■ Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD Video titles. ■ Make sure to connect the computer's AC adapter when playing a DVD Video. Power-saveing features may interfere with smooth playback. ■ If you see the screen blinking while playing DVD with subtitle on at Media Player, please use TOSHIBA DVD PLAYER or Media Center to play DVD.
Hardware, Utilities and Options TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. If the verification is successful, the user will be logged into Windows automatically. The user can thus avoid having to enter a password or the like, which makes the login process easier. TOSHIBA Bluetooth This software enables communication between remote Bluetooth devices.
Hardware, Utilities and Options Windows Mobility Center This section describes the Windows Mobility Center. Mobility Center is a utility for accessing several mobile PC settings quickly in one window. A default maximum of seven tiles are provided by the operating system, and the additional two tiles are added to your Mobility Center. ■ Lock Computer: This can be used to lock your computer without turning it off.
Hardware, Utilities and Options Power devices ■ Additional battery pack (6 cell) ■ Additional AC adapter Peripheral devices ■ ■ ■ ■ USB FDD Kit eSATA External monitor HDMI Other ■ Security lock Bridge Media Slot The computer is equipped with a Bridge media slot that can accommodatesome kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants. Keep foreign objects out of the Bridge media slot.
Hardware, Utilities and Options 1.MICROSD CARD AND ADAPTER 2.MULTIMEDIACARD(MMC) 3.XD PICTURE CARD 4.SECURE DIGITAL(SD) CARD 5.MEMORY STICK Figure 3-1 Examples of memory media Memory Media This section provides the important safety precautions in order to handle your memory media. Points to Note About the SD/SDHC Memory Card SD/SDHC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
Hardware, Utilities and Options Memory Media Format New media cards are formatted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards. Formatting an SD/SDHC Memory Card SD/SDHC memory cards are sold already formatted in conformity to specific standards.
Hardware, Utilities and Options About the Write-protect The following memory media have a function for protect. ■ SD Card (SD memory card, SDHC memory card) ■ Memory Stick (Memory Stick, Memory Stick PRO) Set the write-protect switch to the lock position, if you do not want to record data. Inserting a Memory Media The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below: 1. Insert the memory card. 2.
Hardware, Utilities and Options 1. 2. 3. In Windows 7, open the Safely Remove Hardware and Eject Media icon on the system tray and disable the inserted memory card. Gently press the memory card inside the socket to eject it. Grasp the card and remove it. 1.THE MEMORY CARD* *THE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED. Figure 3-3 Removing the inserted memory card ■ Make sure the Bridge media slot indicator is out before you remove the memory media or turn off the computer’s power.
Hardware, Utilities and Options USB FDD Kit The 3 1/2" external FDD drive module can be connected to the USB port. eSATA An eSATA-equipped device can be connected to the eSATA/USB combo port. External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below. The hibernation and sleep feature can be used with an external monitor.
Hardware, Utilities and Options 2. Plug the other end of the HDMI cable into the HDMI port on your computer. Figure 3-4 Connecting a HDMI cable ■ When you connect a television or external monitor to the HDMI port and the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again.
Hardware, Utilities and Options Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the left side of the computer. 1.SECURITY LOCK 2.KEY Figure 3-5 Security lock Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available.
Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVD. Using the touchpad Press Touchpad ON/OFF Button can enable or disable touchpad function. To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics 1.TOUCHPAD ON/OFF BUTTON 2.TOUCHPAD 3..FINGERPRINT SENSOR* 4.TOUCHPAD CONTROL BUTTNS *DEPENDING ON THE MODEL YOU PURCHASED Figure 4-1 Touchpad, ON/OFF button, control buttons and fingerprint sensor Touch Pad Gesture There are four convenient gestures that make users operate the system easier and faster. ChiralMotion You can scroll vertically and horizontally. To enable these features, select the Enable vertical scrolling and Enable horizontal scrolling check boxes.
Operating Basics Rotating (ChiralRotate) The Rotating features provide convenient gestures for rotating photos and other objects. Momentum The Momentum feature delivers smooth, fast, trackball-like mouse movement. One quick flick of the finger on the TouchPad surface can move the cursor across the entire computer screen. Momentum reduces the repetitive motion and fatigue associated with moving the cursor long distances, while providing a smooth and natural feel similar to using a trackball.
Operating Basics How to swipe your finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible. In performing this process, you should also take care to ensure that the center of your fingerprint is on the sensor.
Operating Basics Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition. ■ Wash and dry your hands thoroughly. ■ Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially when the weather is dry. ■ Clean the sensor with a lint-free cloth - do not use detergent or any other chemicals to clean the sensor.
Operating Basics ■ Please also refer to the fingerprint utility Help file for more information. You can start it using the following method: ■ Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Fingerprint Utility. The main screen is displayed. Click ? in the lower left corner of the screen.
Operating Basics 7. The following message will be displayed: "It is strongly recommended you enroll one more finger." Click OK and repeat Step 3, 4, 5 and 6 with another finger. ■ It is strongly recommended that you register 2 or more fingerprints. ■ You cannot enroll the same fingerprint more than once, even on a different user account. Delete the Fingerprint Data Saved fingerprint data is stored in special non-volatile memory inside the fingerprint sensor.
Operating Basics Windows Logon via Fingerprint Authentication In place of the usual Windows logon by ID and password, fingerprint authentication also allows logon to Windows. This is useful especially when many users are using the PCs, as user selection can be skipped. Fingerprint Authentication Procedure 1. Start up the computer. 2. The Logon Authorization screen is displayed. Choose any of the enrolled fingers and swipe the fingerprint on the sensor.
Operating Basics ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint boot authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.
Operating Basics 7. Select Setting in the main menu to open the Setting window, you can ■ Select Boot authentication check box if you want to use the fingerprint boot authentication feature. ■ Select Boot authentication and Single sign-on check boxes if you want to use the Single Sign-on feature. 8. Click Apply. 9. "Save succeeded" is displayed. Click OK. 10. Click Close. 11. "Are you sure you want to quit?" is displayed. Click OK. It will be returned to the TOSHIBA Fingerprint Utility main menu.
Operating Basics Using TOSHIBA Web Camera Application TOSHIBA Web Camera Application is pre-configured to start when you turn on Windows 7; if you need to restart it go to Start -> All Programs -> TOSHIBA -> Utilities -> Web Camera Application. 1.DELETE RECORDED FILE 2.OPEN/CLOSE PREVIEW AREA 3.VIDEO RECORDING 4.CAPTURE STILL IMAGES 5.CAMERA RESOLUTION 6.
Operating Basics Using the microphone You can use the built-in or an external microphone that connects to the microphone jack to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions.(Built-in microphone is provided with some models) Since your computer has a microphone and speaker, “feedback” may be heard under certain conditions.
Operating Basics Disclaimer Toshiba does not guarantee that the face recognition utility technology will be completely secure or error-free. Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
Operating Basics 7. Perform the verification test. Face the screen as you do when you register. ■ If verification fails, click the Back button and re-register. Please refer to step 6 from step 4. 8. If verification is successful, click the Next button and register an account. 9. Register the account. Fill in all the fields. 10. The Management screen is displayed. The registered account name will be displayed. Clicking on it will cause the captured image of your face to be displayed on the left.
Operating Basics 2. 3. 4. 5. 6. The Select Tiles screen will be displayed. Select Start face recognition. “Please face the camera” will be displayed. Verification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another. ■ If an error occurs during authentication, you will be returned to the Select Tiles screen. The Windows Welcome screen will be displayed, and will be logged in automatically to Windows. 1:1 Mode Login screen 1.
Operating Basics Loading discs Slot-loading optical disc drive For computer with slot-loading optical disc drive, to load CD/DVD, please follow the steps below and refer to figures. 1. Turn your computer on. 2. Gently hold the CD/DVD by the edges with label side facing up, and insert it into the optical disc drive slot straight on slowly. Gently push the CD/DVD until it is loaded automatically. Do not push it forcibly or at an angle to the optical disc drive slot.
Operating Basics 1.EJECT BUTTON 2.OPTICAL DISC DRIVE SLOT Figure 4-6 Pressing the eject button 3. Gently hold the CD/DVD by the edges and pull it horizontally. Figure 4-7 Removing a CD/DVD Optical Drive Auto Lock This function is provided with some models. This function automatically locks the optical disc drive eject button if the computer detects any vibration or other shochks while running on the battery.
Operating Basics Enabling and Disabling Optical Drive Auto Lock 1. Right click on the Optical Drive Power icon on the Taskbar. 2. Click Optical Drive Auto Lock -> Enable or Disable. Lock Time Settings for Optical Drive Auto Lock This sets the amount of time required to pass before the optical disc drive eject button unlocks when the Computer detects vibration or other shock. 1. Right click on the Optical Drive Power icon on the Taskbar. 2. Click Unlock time settings -> 1s or 3s or 5s.
Operating Basics Volume Up Increase volume Volume Down Decrease volume TOSHIBA Button Support You can update and assign other applications to the function buttons using the TOSHIBA Button Support utility. To open TOSHIBA Button Support, please follow one of the methods listed below: ■ Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist, and then click the OPTIMIZE tab in the TOSHIBA Assist window. In the OPTIMIZE tab page, click TOSHIBA Button Support.
Operating Basics CD/DVD Play/Pause operation If CD/DVD Play/Pause is selected in Step1 of the TOSHIBA Button Support section, the TOSHIBA Button Support dialog box will be displayed as shown below: 1. Click Advanced. The following dialog box will appear. 2. Select either CD/DVD Play/Pause (default) or Play/Pause. ■ If CD/DVD Play/Pause is selected, this button allows you to launch the corresponding player application according to the type of disc inserted.
Operating Basics Before writing or rewriting ■ Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/-RW and DVD-R/+R/-RW/+RW/RAM/+R DL/-R DL disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYO YUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. HITACHI MAXELL, LTD CD-RW: (Multi-Speed and High-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD.
Operating Basics DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, 2.1 or 2.2 Panasonic CO., LTD. (for 3x and 5x speed media) HITACHI MAXELL, LTD. (for 3x and 5x speed media) This DVD Super Multi (±R DL) drive cannot use discs that allow writing faster than 16x speed (DVD-R and DVD+R media), 8x speed DVD-R DL, DVD+RW and DVD+R DL media, 6x speed (DVD-RW media) and 5x speed (DVD-RAM media).
Operating Basics ■ Be sure to connect the universal AC adapter before you write or rewrite. ■ Before you enter sleep/hibernation mode, be sure to finish DVD-RAM writing. Writing is finished if you can eject DVD-RAM media. ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver, which can put a heavy load on the CPU. ■ Operate the computer in the full-power mode. Do not use power-saving features.
Operating Basics Disclaimer (DVD Super Multi (±R DL) drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/DVDRAM disc that may be caused by writing or rewriting with this product.
Operating Basics ■ If you add data to a DVD-R, DVD-R DL, DVD+R or DVD+R DL disc that you have already recorded to, you might not be able to read the added data under some circumstances. For example, it cannot be read under 16-bit operating systems, such as Windows 98SE and Windows Me, while in Windows NT4 you will need Service Pack 6 or later, and in Windows 2000, you will need Service Pack 2.
Operating Basics 1. Insert a Labelflash disc in DVD drive. Set PRINTING SIDE for underside. 2. 3. 4. 5. 6. 7. 8. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> DVD MovieFactory Launcher to launch DVD MovieFactory. Click Create Disc Label. Corel Label@Once is started. Click the General tab. Choose DVD Drive for Printer. e.g. PIONEER DVD.... Add and customize the look of your images and text. Click Label Flash Settings and choose Draw Quality. Click Print.
Operating Basics 2. ■ Do not enter sleep or hibernation mode while using DVD MovieFactory. ■ Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. ■ When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data. ■ CD recorder, DVD-Audio, mini DVD and Video CD functions are not supported in this version.
Operating Basics Notes on Use ■ Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD Video titles. ■ Close all other applications or carry out any other operations during DVD Video playback. Playback may stop or not function properly in some situations. ■ Unfinalized DVDs created on home DVD recorders may not be playable on the computer. ■ Use DVD-Video discs with a region code which is either “the same as the factory default setting” or “ALL”.
Operating Basics Display Devices & Audio ■ "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "True Color (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start -> Control Panel -> Appearance and Personalization / Appearance -> Display -> Change display settings -> Advanced settings.
Operating Basics 2. Touch the CD/DVD panel on the Front operation panel. Or select Start -> All Programs -> TOSHIBA DVD PLAYER -> TOSHIBA DVD PLAYER to start TOSHIBA DVD PLAYER. Operating TOSHIBA DVD PLAYER Notes on Using TOSHIBA DVD PLAYER ■ Screen display and available features may vary amongst DVD-Videos and scenes. ■ Only operation buttons (including remote controller and Front operation panels) which correspond to currently available and active features will be useable during DVD playback.
Operating Basics 3. 4. 5. 6. Do not write on, apply a sticker to, or otherwise mark the surface of the CD/DVD that contains data. Hold the CD/DVD by its outside edge or the edge on the center hole. Fingerprints on the surface can prevent the drive from properly reading data. Do not expose to direct sunlight, extreme heat or cold. Do not place heavy objects on your CD/DVD. If your CD/DVD become dusty or dirty, wipe them with a clean dry cloth.
Operating Basics Realtek HD Audio Manager You can confirm and change the audio configuration using the Realtek HD Audio Manager. To launch the Realtek HD Audio Manager, click Start -> Control Panel -> Hardware and Sound -> Realtek HD Audio Manager. When you first launch the Realtek HD Audio Manager, you will see following device tabs. Speakers is the default output device. Microphone is the default input device. To change the default device, click the Set Default Device button under the chosen device tab.
Operating Basics Wireless communications The computer’s wireless communication function supports Wireless LAN and Bluetooth devices. Only some models are equipped with both Wireless LAN and Bluetooth functions. ■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi or Bluetooth operation.
Operating Basics Worldwide operation The BluetoothTM radio transmitter and receiver operates in the 2.45 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices. The link is maintained even if the devices are not within line of sight.
Operating Basics LAN The computer has built-in support for Ethernet LAN (10 megabits per second,10BASE-T) or Fast Ethernet LAN (100 megabits per second, 100BASETX). This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adapter connected while using this feature.
Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. Make sure the LAN active indicator (orange LED) is out before you disconnect the computer from the LAN. 1. 2. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
Operating Basics Using the Hard Disk Drive (HDD) Protection This computer has a function for reducing the risk of damage on the Hard Disk Drive. Using an acceleration sensor built into the computer, TOSHIBA HDD Protection detects vibration shocks and similar signs of movement of the computer, and automatically moves the Hard Disk Drive head to a safe position to reduce the risk of damage that could be caused by head-to-disk contact.
Operating Basics Different detection levels can be set depending on whether the computer is used as handheld or mobile usages, or whether it is used in a stable environment such as on a table in the workplace or at home. By setting different detection levels for the computer depending on whether it runs with the AC power (desktop) or with batteries (handheld or mobile usage), the detection level automatically switches according to the power connection mode.
Operating Basics Using the USB Sleep and Charge function This utility displays whether the USB Sleep and Charge function is enabled or disabled and shows the positions of USB ports that support the USB Sleep and Charge function. It also displays the remaining battery capacity. USB Sleep and Charge Your computer can supply USB bus power (DC5V) to the USB port even when the power of the computer is turned OFF. "Power OFF" includes Sleep Mode, Hibernation Mode or shutdown state.
Operating Basics ■ When "USB Sleep and Charge function" is enabled, USB bus power (DC5V) will be supplied to compatible ports even when the power of the computer is turned OFF. USB bus power (DC5V) is similarly supplied to the external devices which are connected to the compatible ports. However, some external devices cannot be charged solely by supplying USB bus power (DC5V).
Operating Basics 2. In the USB Sleep and Charge field within the Advanced tab, use F5/F6 key to change the settings. 3. Press the F10 key. Select Yes and then press the ENTER key to accept the changes. The computer will restart. Enabling USB Sleep and Charge This utility can be used to enable and disable the USB Sleep and Charge function. Check the “Enable USB Sleep and Charge” check box. In the default state this function is disabled.
Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, function keys, soft keys, Windows special keys and keypad overlay. Typewriter keys The typewriter keys, produce the uppercase and lowercase letters, numbers, punctuation marks, and special symbols that appear on the screen.
The Keyboard Function keys: F1 … F12 The function keys, not to be confused with FN, are the 12 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the FN key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: FN key combinations, in this chapter.
The Keyboard Press FN + F12 (Scroll Lock) to lock the cursor on a specific line. The power on default is off. Press FN + ENTER to simulate ENTER on the enhanced keyboard’s numeric keypad. Press FN + CTRL to simulate the enhanced keyboard’s right CTRL key. Press FN + ALT to simulate the enhanced keyboard’s right ALT key. Hot keys Hot keys (pressing FN + a function or ESC key) allow you to enable or disable certain features of the computer.
The Keyboard Output Pressing FN + F5 changes the active display device. Brightness down Pressing FN + F6 decreases the computer’s display panel brightness in individual steps. Brightness up Pressing FN + F7 increases the computer’s display panel brightness in individual steps. Wireless Pressing FN + F8 enables or disables Wireless (WLAN/Bluetooth). If your wireless communication device is not installed, a dialog box will not appear.
The Keyboard TOSHIBA zooming utility (enlarge) Pressing FN + 2 enlarges the icon size on the desktop or the font sizes within one of the supported application windows. Volume Down Pressing FN + 3 decreases the volume. Volume Up Pressing FN + 4 increases the volume. Keyboard Backlight and Indicators Pressing FN + switches the lighting of Indicators and Keyboard Backlight. Timer The keyboard backlight will turn on when a key is pressed.
The Keyboard To start the TOSHIBA Accessibility Utility, click Start -> All Programs-> TOSHIBA-> Utilities-> Accessibility. Windows special keys The keyboard provides two keys that have special functions in Windows: one activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Start menu. This key has the same function as the secondary mouse button.
The Keyboard Figure 5-1 The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without turning off the overlay : 1. Hold FN and press any other key. All keys will operate as if the overlay were off. 2. Type uppercase characters by holding FN + SHIFT and pressing a character key. 3. Release FN to continue using the overlay.
The Keyboard If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing SHIFT. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation. But, you can generate these characters using their ASCII codes. With the overlay on: 1. Hold down ALT. 2. Using the overlay keys, type the ASCII code. 3. Release ALT, and the ASCII character appears on the display screen. With the overlay off: 1. Hold ALT + FN. 2.
Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes.
Power and Power-up Modes Power on AC adapter not connected Battery charge is above low battery trigger point • Operates • LED: Battery off DC IN off Battery charge is below low battery trigger point • Operates • LED: Battery blinking orange DC IN off Battery charge is exhausted Computer goes into hibernation or shuts down (depending on the TOSHIBA power Management Utility Setting) No battery installed • No operation •LED: Battery off DC IN off Power off (no operation) Power indicators The Battery
Power and Power-up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected. White Indicates the AC adapter is connected and supplying proper power to the computer. No light Under any other conditions, the indicator does not light.
Power and Power-up Modes When the computer is powered off in hibernation and sleep mode, and the AC adapter is not connected, the battery pack supply power to maintain data and programs in memory. If the battery pack is completely discharged, hibernation and sleep do not function and the computer loses all data in memory. One of the following messages appears when you turn on the power: The firmware has detected that a CMOS battery fail occurred.
Power and Power-up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advisories: Danger: Indicates an imminently hazardous situation, Which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, Which could result in death or serious injury, if you do not follow instructions.
Power and Power-up Modes Warning 1. 2. 3. 4. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing. If caustic electrolyte fluid should contact your eyes, immediately wash your eyes with large amounts of running water and seek medical attention, to help prevent eye damage. It electrolyte fluid should contact your skin immediately wash it under running water to prevent rash.
Power and Power-up Modes Note 1. 2. 3. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. To ensure the battery pack maintains maximum capacity, operate the computer on battery power once a week until the battery pack is fully discharged. Refer to the section Extending battery life in this chapter for procedures.
Power and Power-up Modes The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices, for example, the battery might scarcely charge at all during operation. Refer also to the section Maximizing battery operating time. Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold.
Power and Power-up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in Power Options, to conserve battery power.
Power and Power-up Modes Extending battery life To maximize the life of your battery packs: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below. 1. Turn off the computer’s power. 2. Disconnect the AC adapter and turn on the computer’s power. If it does not turn on then go to Step 4. 3. Operate the computer on battery power for five minutes.
Power and Power-up Modes Removing the battery pack To remove a discharged battery, follow the steps as detailed below: ■ When handling battery pack, be careful not to short circuit the terminals. Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and do not twist or bend the battery pack. ■ Do not remove the battery pack while the computer is in sleep mode. Data is stored in RAM, so if the computer loses power it will be lose.
Power and Power-up Modes 6. Slide the battery release latch to free the battery pack for removal, then lift up the battery pack. 1.BATTERY PACK 2.BATTERY RELEASE LATCH Figure 6-2 Removing the battery pack 7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.
Power and Power-up Modes Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power-on Security. If you would not like to swipe your finger or cannot authenticate the fingerprint for some reasons, press the ESC key or click Switch User button to skip the fingerprint authentication screen.
Power and Power-up Modes Panel power on/off You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in sleep or hibernation mode but not in boot mode. If the panel power off function is enabled and use Shut down Windows, do not close the display until the shut down function is completed. System auto off This feature turns the system off automatically if it is not used for a set duration.
Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup allows you to configure settings for General, Password, Display, Boot Priority, Keyboard, USB, LAN, LED and SATA. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.
HW Setup General This window displays the BIOS/EC version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version, date and EC version. Password User Password This option allows you to set or reset the user password for power on. Not Registered Changes or remove the password. (Default) Registered Sets the password.
HW Setup 3. Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to: Not registered If they do not match, the following message appears. You must repeat step 1. Incorrect Password. If you enter the password incorrectly three times in a row, the computer need to shut off. You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure. 4.
HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. The Boot Priority Options setting will be like the following. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: U Selects the USB diskette drive. N Selects the network. 1 Selects the HDD. C Selects the CD-ROM*. S Selects the USB Memory. E Selects the eSATA HDD. This procedure does not affect the settings.
HW Setup ■ If a supervisor password is set, the menu above does not appear when you use the user password to start the computer. ■ The selection method above does not change the boot priority settings in HW Setup. ■ If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup. Boot Speed This feature allows you to select system boot-up speed. Fast Reduces system boot-up time.
HW Setup Regarding Wake-up on LAN from sleep or hibernation, you must check the “Allow the device to wake the computer” check box within the LAN Device properties”(This feafure does not effect the Wake-up on LAN from sleep or hibernation). Enabled Enables the Wake-up on LAN from shotdown. Disabled Disables the Wake-up on LAN from shotdown. (Default) Do not install or remove an optional memory module while Wake-up on LAN is enabled. Wake-up on LAN does not work without the AC adapter.
Chapter 8 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists. Further action may result in data loss or damage.
Troubleshooting ■ Make sure all options are set properly in the setup program. ■ Check all cables. Are they correctly and firmly attached? Loose cables can cause signal errors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your diskette is correctly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer.
Troubleshooting Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals.
Troubleshooting Power When the computer is not plugged into an AC adapter, the battery pack is the primary power source. However, your computer has a number of other power resources, including intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. This section provides check lists for AC adapter and the main battery. If you cannot resolve a problem after following them, the cause could lie with another power resource.
Troubleshooting Problem Procedure Battery doesn’t charge when the AC adapter is attached (Battery indicator does not glow orange). If the battery is completely discharged, it will not begin charging immediately. Wait a few minutes. If the battery still does not charge, make sure the outlet is supplying power. Test it by plugging in an appliance. If it doesn’t work, try another power source. Check whether the battery is hot or cold to the touch.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup. Problem Procedure Some letter keys produce numbers Check that the numeric keypad overlay is not selected. Press FN + F11 and try typing again. Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. See your software’s documentation.
Troubleshooting Problem Procedure Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. As a last resort, reformat the hard disk. Then, reload the operating system and other files. If problems persist, contact your dealer. DVD Super Multi(±R DL) drive For more information, refer to Chapter 4, Operating Basics.
Troubleshooting Problem Procedure Check the region code on the DVD. It must match that on the drive. Region codes are listed in the Optical disc drive section in Chapter 2, The Grand Tour. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing.
Troubleshooting Problem Procedure Double-tapping does not work Try changing the double-click speed setting in the mouse control utility. Click Start -> Control Panel -> Hardware and Sound -> Devices and Printers -> Mouse to access it. The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. Click Start -> Control Panel -> Hardware and Sound -> Devices and Printers -> Mouse to access it. When the reaction of Adjust the touch Sensitivity.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the double-click speed setting in the mouse control utility. Click Start -> Control Panel -> Hardware and Sound -> Devices and Printers -> Mouse to access it. The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning. If problems persist, contact your dealer.
Troubleshooting Problem Procedure Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. When displaying desktop at external analog monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size). At that time, please read the manual of the monitor and set the display mode which is supporting at the monitor.
Troubleshooting Problem Procedure If you are using an operating system that does not support USB, you can still use a USB mouse and/or USB keyboard. If these devices do not work, make sure the USB KB/Mouse Legacy Emulation item in HW Setup is set to [Enabled]. If problems persist, contact your dealer. eSATA/USB combo port Refer also to your eSATA device and USB device’s documentation.
Troubleshooting LAN Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN Make sure the AC adapter is connected. The does not work Wake-up on LAN function consumes power even when the system is off. If problems persist, consult your LAN administrator. Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator.
Troubleshooting Recovery Media Problem Procedure The following message appears when executing Recovery Media Creator. [The Recovery Media Creator can not be launched because there is no recovery partition.] You will see this message if you have previously chosen to remove the partition and are trying to create Recovery Media. When there is no recovery partition, the Recovery Media Creator cannot make Recovery Media.
Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe Europe Australia Germany & Austria TOSHIBA Europe (I.E.) GmbH Geschäftsbereich, Deutschland-Österreich Hammfelddamm 8, D-41460 Neuss, Germany TOSHIBA Australia Pty Ltd. Information Systems Division Building C, 12-24 Talavera Rd, North Ryde, 2113, NSW, Australia Canada TOSHIBA of Canada Ltd.
Appendix A Specifications This appendix summarizes the computer’s technical specifications.
Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pixels on or off. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors. The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed on screen.
Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications User’s Manual Form Factor ■ PCI Express Mini Card Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The ‘Wi-Fi CERTIFIED’ logo is a certification mark of the Wi-Fi Alliance.
Wireless LAN Radio characteristics Radio characteristics of Wireless LAN cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision B, G and N)Table *1 Frequency Range Channel ID 1 2 3 4 5 6 7 8 9 10 11 12 2400-2483.5 MHz 2412 2417 2422 2427 2432 2437 2442 2447 2452 13 2472*2 2457*1 2462 2467*2 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used.
Wireless LAN Wireless IEEE 802.
Appendix D Bluetooth wireless technology Interoperability Bluetooth Adaptor from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ■ Bluetooth Specification Ver. 2.1+EDR, as defined and approved by The Bluetooth Special Interest Group. ■ Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group.
Bluetooth wireless technology Interoperability Bluetooth wireless technology and your Health The products with Bluetooth wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is far much less than the electromagnetic energy emitted by wireless devices like forexample mobile phones.
Bluetooth wireless technology Interoperability USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
Bluetooth wireless technology Interoperability Taiwan Article 12 Without permission granted by the DGT or NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radiofrequency devices.
Bluetooth wireless technology Interoperability (1) 2.4 : This equipment uses a frequency of 2.4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1: The interference range of this equipment is less than 10 m. (4) This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3.
Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Wire size: Current rating: Voltage rating: Minimum 1.7 meters Minimum 0.75 mm2 Minimum 2.
AC Power Cord and Connectors In Europe, two conductors power cords must be VDE type, H05VVH2-F or H03VVH2-F; while three conductors be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
Appendix F TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor software program monitors computer system functions such as power consumption, the cooling system and HDD/SSD status. It alerts users of specific system conditions via pop-up messages. It also tracks the usage of the computer and related devices, logging the service relevant information on the computer's hard disk drive. The collected information includes device operation time and number of actuations or status changes (i.e.
TOSHIBA PC Health Monitor Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD. The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply. Visit http://www.warranty.toshiba.com for details.
Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual. Clicking on *XX will display the related description. CPU*1 Central Processing Unit (CPU) Performance Disclaimer.
Legal Footnotes Under some conditions, your computer product may automatically shutdown. This is a normal protective feature designed to reduce the risk of lost data or damage to the product when used outside recommended conditions. To avoid risk of lost data, always make back-up copies of data by periodically storing it on an external storage medium. For optimum performance, use your computer product only under recommended conditions.
Legal Footnotes HDD Drive Capacity and External HDD Capacity*4 One Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity.
Legal Footnotes Non-applicable icons Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features. Copy protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media.
Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary IDE: integrated drive electronics I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output TFT: thin-film tra
Glossary analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity.
Glossary byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
Glossary components: Elements or parts (of a system) which make up the whole (system). Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
Glossary dialog box: A window that accepts user input to make system settings or record other information. Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk. To accomplish these tasks, the unit physically rotates the disk at high speed past a read-write head.
Glossary echo: To send back a reflection of the transmitted data to the sending device. You can display the information on the screen, or output it to the printer, or both. When a computer receives back data it transmitted to a CRT (or other peripheral device) and then retransmits the data to printer, the printer is said to echo the CRT. erase: See delete. escape: 1) A code (ASCII code 27), signaling the computer that what follows are commands; used with peripheral devices such as printers and modems.
Glossary hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing. Also called fixed disk. hard disk drive (HDD): An electromechanical device that reads and writes a hard disk. See also hard disk. hardware: The physical electronic and mechanical components of a computer system: typically, the computer itself, external disk drives, etc. See also software and firmware.
Glossary jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer.
Glossary modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment.
Glossary parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even. password: A unique string of characters used to identify a specific user. The computer provides various levels of password protection such as user and supervisor.
Glossary RJ11: A modular telephone jack. RJ45: A modular LAN jack. ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation. You cannot access or change information stored in ROM. S S-Video: Short for Super-Video, a type of connection used by S-VHS videocassette players, camcorders, DVD players, etc. to transmit high-quality video signals.
Glossary TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
Index A D AC adapter, 2-5, 2-15, 3-4, A-1 additional, 3-18, 3-21 connecting, 1-3 problems, 8-4 safety instructions, -vi, -xviii ASCII characters, 5-8 DC IN, 2-5 connecting, 1-5 indicator, 2-12, 6-3 location, 2-5 DC IN 19V, 2-5 Display, 2-7, 2-8, G-3 automatic power off, 3-7 brightness down, 5-4 brightness up, 5-4 controller, B-1 HDMI, 3-20 HW Setup, 7-3 opening, 1-5 problems, 8-6, 8-10 resolution, 5-4 safety instructions, G-4 size, 2-8 switching, 5-4 DVD Super Multi (±R DL) drive, 2-14, 3-3 DVD Super Mul
Satellite E200 function, 3-12, 4-3 location, 4-2 FN + 1 (TOSHIBA zooming utility reduce), 5-4 FN + 2 (TOSHIBA zooming utility enlarge), 5-5 FN + ALT (enhanced keyboard simulation), 5-3 FN + CTRL (enhanced keyboard simulation), 5-3 FN + ENTER, 5-3 FN + ESC (sound mute), 5-3 FN + F1 (lock), 5-3 FN + F12 (scroll lock), 5-3 FN + F2 (power plan), 5-3 FN + F3 (sleep), 5-3 FN + F4 (hibernate), 5-3 FN + F5 (output), 5-4 FN + F6 (brightness down), 5-4 FN + F7 (brightness up), 5-4 FN + F8 (wireless), 5-4 FN + F9 (to
Satellite E200 problems, 8-6 typewriter keys, 5-1 Windows special keys, 5-6 Keypad overlay, 5-6 arrow mode, 5-6 numeric mode, 5-6 temporarily changing modes, 5-7 temporarily using normal keyboard (overlay on), 5-7 temporarily using overlay (overlay off), 5-7 turning on the overlays, 5-6 L LAN, 3-5, 4-35 cable types, 4-35 connecting, 4-35 disconnecting, 4-36 indicator, 4-35 port, 2-5 problems, 8-13 LCD, See Display Lock, security, See Security lock M Main battery, See Battery pack Memory, 3-2, 8-10, G-2 M
Satellite E200 keyboard, 8-6 LAN, 8-13 LCD panel, 8-6 overheating power down, 8-4 password, 8-5 pointing device, 8-8 power, 8-4 self test, 8-3 sleep/hibernation, 8-12 sound system, 8-11 system start-up, 8-3 TOSHIBA support, 8-14 touchpad, 8-8 USB, 8-11 USB mouse, 8-9 Wireless LAN, 8-13 Processor, 3-1 R Real Time Clock battery, See Battery Recovery Media, 8-14 Recovery media, 1-13 Restarting the computer, 1-10 S Security lock attaching, 3-21 Shut down mode (boot mode), 1-7 Sleep mode, 3-8 problems, 8-12 s
