libretto® U100/U105 Series User’s Guide If you need assistance: ❖ Toshiba’s Support Website pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 184 in this guide.
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Model: libretto® U100/U105 Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty The computer system you purchased may include Recordable and/or ReWritable optical media drive(s) and associated software, among the most advanced data storage technologies available.
Critical Applications The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact either: ❖ Toshiba’s Support Website at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777. Outside the United States at (949) 859-4273.
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can.
provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
2 The user manual of analog equipment must contain the equipment’s Ringer Equivalence Number (REN) and an explanation notice similar to the following: The Ringer Equivalence Number (REN) of this device can be found on the label affixed to your computer. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
French: Swedish: Danish: German: Par la présente TOSHIBA Corp. Digital Media Network Company déclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/ CE. Par la présente, TOSHIBA Corp. Digital Media Network Company déclare que ce Radio LAN device est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables. Härmed intygar TOSHIBA Corp.
Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
1. Sticker Please put the following sticker on devices incorporating this product. 2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4DSOF4 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.
JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ ❖ Do not disassemble or modify the device. Do not install the embedded wireless module into other device.
Deutschland: France: Italia: Nederland: Voor privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig. Voor registratie of licentie kunt u contact opnemen met BIPT. Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m.
Bluetooth® wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all PCs and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board airplanes, or ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4FH1 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3.
DVD-ROM, multi-function drive safety instructions The DVD-ROM and multi-function drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Never attempt to disassemble, adjust or repair a CD/DVD drive, CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazard, resulting in serious injury.
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. ©2005 by Toshiba America Information Systems, Inc. All rights reserved. Export Administration Regulation This document contains technical data that may be controlled under the U.S.
Trademarks libretto, Accupoint, and Noteworthy are registered trademarks, FreedomWare, and SmartMedia are trademarks, of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. DirectX, Active Desktop, DirectShow, and Windows Media are registered trademarks of Microsoft Corporation. ConfigFree is a trademark of Toshiba Corporation.
Contents Introduction................................................................................ 29 This guide ...............................................................30 Safety icons ............................................................31 Other icons used...............................................32 Other documentation ..............................................32 Service options .......................................................33 Chapter 1: Getting Started..................
Contents Using the computer for the first time ......................46 Opening the display panel .................................46 Your computer’s features and specifications ....47 Turning on the power .......................................47 Adding memory ......................................................48 Installing a memory module .............................49 Removing a memory module............................52 Hard Drive Recovery Utilities (for the U100 model only)...................
Contents 23 Chapter 2: Learning the Basics................................................. 78 Computing tips .......................................................78 Using the keyboard .................................................80 Character keys .................................................80 Making your keyboard emulate a full-size keyboard .....................................................80 Ctrl, Fn, and Alt keys .........................................81 Function keys..................
Contents Chapter 3: Mobile Computing.................................................104 Toshiba’s energy-saver design..............................104 Running the computer on battery power ..............105 Battery Notice .................................................105 Charging the batteries...........................................106 Charging the main battery...............................107 Charging the RTC battery................................108 Monitoring battery power .................
Contents 25 Exploring audio features .......................................133 Recording sounds...........................................133 Using external speakers or headphones..........134 Inserting and removing PC Cards .........................135 Inserting a PC Card.........................................135 Removing a PC Card .......................................136 Setting up a PC Card for your computer .........137 Using a Secure Digital (SD) card...........................
Contents Using a supervisor password................................157 Setting a supervisor password........................157 Deleting a supervisor password......................158 HDD Protection .....................................................158 TOSHIBA Zooming Utility......................................160 CD/DVD Drive Acoustic Silencer ...........................161 TOSHIBA Accessibility ..........................................162 TOSHIBA SD Memory Boot Utility.........................
Contents 27 Power and the batteries ..................................196 Keyboard problems.........................................198 Display problems ............................................199 Disk drive problems ........................................201 DVD-ROM or multi-function drive problems...204 Sound system problems .................................205 PC Card problems...........................................205 Printer problems .............................................
Contents Appendix C: Using ConfigFree™ with your Toshiba Computer..............................................234 Getting Started......................................................235 Starting ConfigFree .........................................235 ConfigFree Utilities................................................237 Connectivity Doctor ........................................237 Search for Wireless Devices ...........................240 Profile Settings ..........................................
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go. You will find your operating system, Microsoft® Windows® XP Professional, already installed on your computer. Your operating system offers exciting features, multimedia enjoyment, and easy Internet access. NOTE Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection.
Introduction This guide NOTE The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshiba's Web site at pcsupport.toshiba.com.
Introduction Safety icons 31 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Introduction Other documentation Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer. HINT: This icon indicates helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text.
Introduction Service options 33 Service options Toshiba offers a full line of optional service programs to complement its limited warranty. Toshiba's standard limited warranty, extended warranty, and service upgrade terms and conditions are available at www.warranty.toshiba.com. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations. Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer.
Getting Started Selecting a place to work 35 To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters ❖ Extreme heat, cold, or humidity ❖ Liquids and corrosive chem
Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1. Turn off the computer. 2. Disconnect the AC adapter from the power plug socket and computer. 3. Remove the battery pack.
Getting Started Selecting a place to work 37 Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure.
Getting Started Setting up your computer special program to check for viruses. Ask your dealer to help you. Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked. The fan draws in air by creating a vacuum.
Getting Started Setting up your computer 39 To use external power or to charge the battery you must attach the AC adapter. See “Connecting to a power source” on page 42. To register your computer online or to sign up for an Internet account, you must either connect the built-in modem to a telephone line or establish a Local Area Network (LAN) connection. See “Connecting the modem to a telephone line” on page 125.
Getting Started Registering your computer with Toshiba NOTE 6 If you are connecting your computer to a network, consult your system administrator before you choose your computer name and network settings. Follow the remaining screen prompts to complete the setup process. Once you click the final screen, your computer restarts automatically.
Getting Started Adding external devices 41 Adding external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 39. After starting your computer for the first time you may want to: ❖ Add more memory (see “Adding memory” on page 48). ❖ Connect a mouse (see “Using a mouse” on page 72). ❖ Connect a full-size keyboard (see “Using an external keyboard” on page 71).
Getting Started Connecting to a power source Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. AC adapter AC adapter cord Power cord/cable Sample power cord/cable and AC adapter Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly.
Getting Started Connecting to a power source 43 Use only the AC adapter supplied with your computer, or use Toshiba-recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury. To connect AC power to the computer: 1 Connect the power cord/cable to the AC adapter.
_ + Getting Started Connecting to a power source 2 Plug the AC adapter cord into the DC-IN on the left side of the computer. Sample connecting the AC adapter cord to the computer 3 Connect the power cord/cable to a live electrical outlet. If the electrical outlet is live, the system indicator panel’s AC power light ( ) glows green.
Getting Started Charging the main battery If the main battery is present, the battery light ❖ Amber while the battery is charging ❖ Green when the battery is fully charged 45 glows: Flashing amber means the main battery charge is low and it is time to recharge the main battery or plug in the AC Adapter. NOTE If the AC power light flashes amber during charging, the main battery is either malfunctioning, or it is not receiving input from the AC power supply.
Getting Started Using the computer for the first time TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur. Your computer's Power Saver utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.
Getting Started Using the computer for the first time 47 Small bright dots may appear on your screen display when you turn on your PC. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate.
Getting Started Adding memory 3 Push the power button in until the on/off light on the system indicator panel glows green. Power button Sample turning on the power The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. Adding memory HINT: To purchase additional memory modules see the accessories information packaged with your system or visit accessories.toshiba.
Getting Started Adding memory 49 may want to increase the computer’s memory if you use complex software or process large amounts of data. Installing a memory module An additional memory module can be installed in the memory module slot on the base of the computer. You will need a standard Phillips No. 1 screwdriver for this procedure. To avoid damaging the computer’s screws, use a standard Phillips No. 1 screwdriver that is in good condition.
Getting Started Adding memory 4 Remove the battery. For information on removing the battery see “Changing batteries” on page 111. 5 Close the display panel and turn the computer upside down to locate the memory module slot cover. Memory module slot cover Sample locating the memory module slot cover 6 Using a standard Phillips No. 1 screwdriver, loosen the screw that secures the memory module slot cover. Sample unscrewing the memory module slot cover 5.375 x 8.375 ver 2.
Getting Started Adding memory 7 51 Remove the memory slot cover. Sample removing the memory module slot cover 8 Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.
Getting Started Adding memory Sample inserting the memory module into the slot The clips on either side of the memory module will click to secure the memory module. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 12 Replace the memory module slot cover and tighten the screw. 13 Turn the computer over and restart it. You can now continue setting up the computer.
Getting Started Adding memory 53 Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) 5 Turn the computer over and restart it. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears and shows total memory.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) 55 Using the HDD Recovery you can: ❖ Create Hard Drive Recovery CDs or DVDs using an optional writable drive purchased separately. ❖ Recover your hard disk drive to the factory-set default. ❖ Recover just your C: drive, leaving any other partitions you may have created intact, for example, a D: drive. ❖ Recover your hard disk drive to the factory-set default without the HDD Recovery partition.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) Sample Recovery Disc Creator screen 3 Select the items you want to copy by clicking the check box next to the item’s Name – recovery files, applications (original bundled drivers and applications), or both the recovery files and applications. 4 Click Burn. 5 Insert the first blank CD or DVD into your computer’s CD/DVD writable drive when prompted. 6 Follow the on-screen prompts for completing the process.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) 57 To recover your hard disk drive using the utilities stored on your computer’s HDD: 1 Make sure the computer is turned off. 2 Press and hold the 0 (zero) key on your keyboard while powering on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) Recovering the C: partition of the HDD without changing the current partition size Recovering the C: drive to its factory default setting reformats your drive and your information on the recovered drive will be lost. Be sure to save your work first. If you have created other partitions (for example, a D: drive) those partitions and any information on them will not be affected and will remain intact.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) 59 before proceeding. 2 NOTE 3 4 Click Yes to begin the restoration and to specify the size of the C: drive. ❖ Press the Left/Right Arrow keys to increase/decrease the C: drive size by 1 GB. ❖ Press the Up/Down Arrow keys to increase/decrease the C: drive size by 5 GB. The size of the C: drive will display on the progress bar as you make your selections. Click Enter to begin the restoration.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image (recommended) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard disk drive and your information will be lost. Be sure to save your work first. 1 Press 1 on the keyboard to recover your hard disk drive to its original factory setting.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) 61 To recover only your C: drive: 1 Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process. Be sure you have saved your work before proceeding. 2 Click Yes to begin the restoration. Once complete, a message displays that the HDD has been recovered.
Getting Started Hard Drive Recovery Utilities (for the U100 model only) Checking the HDD operating status After restoring your hard disk drive you can check its status as follows: 1 Click Start, Control Panel, Administrative Tools, Computer Management, and then Disk Management. 2 Highlight the hard disk drive in the Volume list to display its status in the lower portion of the screen. Deleting the Hard Disk Recovery Utility You can delete the HDD recovery partition without losing your data.
Getting Started Installing drivers and applications 3 63 When the following warning screen displays, click OK to confirm. Sample Delete Hard Disk Recovery Utility confirmation screen After the Delete Hard Disk Recovery Utility has completed, it assigns the appropriate drive letter (for example, E: drive) for the extra space and formats the drive.
Getting Started Using the Accupoint II pointing device Using the Accupoint II pointing device Primary button Accupoint Pointing Device (left mouse button) Secondary button (right mouse button) Sample Accupoint buttons Accupoint Pointing Device—Moves the cursor and selects items on the screen. To move the cursor, gently push the pointing device in the direction you want the cursor to move. Pushing harder on the pointing device moves the cursor faster.
Getting Started Turning off the computer 65 Turning off the computer It is a good idea to turn off your computer when you will not be using it for a while. If you are using the computer for the first time, leave it plugged into a power source (even though the computer is off) to fully charge the main battery. With the computer off, it may take up to three hours to recharge the main battery.
Getting Started Devices for office computing ❖ If you have the LCD power-saver feature set, the LCD panel will automatically turn off until you open it again. ❖ If you have the audible warning set, the computer will beep to notify you that it is still on. ❖ If you have an action feature set, the computer will perform either: Nothing, Standby, Hibernate, or Turn Off (see “Setting user passwords” on page 155).
Getting Started libretto® DVD Dock libretto® DVD Dock NOTE The libretto® DVD Dock ships with certain models only, and is an optional feature that must be purchased separately for those models that do not come with it. For information on accessories, see accessories.toshiba.com. The libretto® DVD Dock allows you to play audio CDs or watch DVD movies on your computer. For more information on using the DVD Dock and playing audio CDs see “Using the libretto® DVD Dock” on page 91.
Getting Started libretto® DVD Dock 2 Place your computer on top of the libretto® DVD Dock lining up the connecting port on the computer with the the alignment pin on the libretto® DVD Dock. Sample of connecting the computer to the libretto® DVD Dock 3 Push the two docking latches into the locked position. Removing the libretto® DVD Dock To remove the libretto® DVD Dock: 1 Slide the Undock switch on the right side of the libretto® DVD Dock.
Getting Started Using external display devices 3 69 Remove the computer from the libretto® DVD Dock. Sample of removing the computer from the libretto® DVD Dock Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: ❖ An external monitor or projector via the RGB (monitor) port.
Getting Started Using external display devices Sample connecting the Toshiba Mini RGB Adapter to the RGB (monitor) adapter port 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5, or by configuring the Display Properties settings.
Getting Started Using an external keyboard 3 71 Release the Fn key. TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and click Apply or OK.
Getting Started Using a mouse Using a mouse You may want to use a mouse instead of the computer’s builtin Accupoint II pointing device. You can use a USBcompatible mouse. NOTE After logging on to your system, the mouse cursor may move to the upper-right side of the screen. If this occurs, push the Esc or Windows key to return it to its original position.
Getting Started Setting up your printer 73 To connect a USB printer: 1 Plug the USB connector into one of the USB ports on your computer. 2 Plug the printer’s power cable into a live AC outlet. Setting up your printer If you started your computer with a printer connected and turned on, it may have been detected automatically (Plug and Play). If it was not, then you will need to install the printer driver for the model of printer that is connected to your computer.
Getting Started Setting up your printer 2 Click Add Printer. The Add Printer Wizard starts. Sample Add Printer Wizard 3 Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. 4 If the printer you are setting up: ❖ Is not connected to a network, select Local printer attached to this computer.
Getting Started Setting up your printer 5 75 Click Next. The Add Printer Wizard prompts you to select your printer. 6 Select your printer from the list of manufacturers and printers, click Next. 7 Select the port settings according to the instructions in your printer’s documentation and the port to which your printer is connected, then click Next. The Add Printer Wizard prompts you to enter a printer name. 8 Enter a name for your printer.
Getting Started Caring for your computer Depending on your program, you may see various messages indicating the status of your print job. TECHNICAL NOTE: Some printers require a specific ® installation process. In this case, the Windows XP operating system Add Printer Wizard will display an error message. If this happens, refer to your printer installation guide for further instructions. Caring for your computer This section gives tips on cleaning and moving your computer.
Getting Started Caring for your computer 77 Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the drive indicator light stops glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back (where the ports are located). Doing so could damage the computer. 5.375 x 8.375 ver 2.
Chapter 2 Learning the Basics This chapter offers some computing tips and provides important information about the basic features of your computer. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the hard disk. If the network you are using goes down and you must restart your computer to reconnect or if your battery runs out of charge while you are working you will lose all work since you last saved.
Learning the Basics Computing tips ❖ 79 Back up your files to discs (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up your data because it takes time. However, if your hard disk suddenly fails you will lose all the data on it unless you have a separate backup copy. ❖ Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance. ❖ Scan all new files for viruses.
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows® keys, which provide all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page.
Learning the Basics Using the keyboard 81 Your computer’s keyboard has only one Enter and one Ctrl key. Most of the time, this does not matter. However, some programs assign separate functions to the right and left Ctrl and Alt keys, or to the regular and numeric pad Enter keys on the full-sized keyboard. Using the Fn key, you can simulate these separate keys, as follows: ❖ Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard.
Learning the Basics Using the keyboard Windows special keys Start key Application key Sample Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the lower portion form the numeric and cursor overlay.
Learning the Basics Using the keyboard 83 Using the overlay to type numeric data The keys with the numbers on the lower right are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: ❖ For lowercase letters, hold down Fn while you type the letters. ❖ For uppercase letters, hold down both Fn and Shift while you type the letters.
Learning the Basics Starting a program To use the numeric overlay keys while the cursor control overlay is on: ❖ Hold down Shift while you use the numeric overlay keys. ❖ To return to the cursor control overlay, release Shift. To disable the cursor control overlay, hold down the Fn key and press F10 again. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on.
Learning the Basics Starting a program 2 85 Point to the program group, in this example, Accessories. The Accessories menu is displayed. 3 Click the program, in this example, WordPad. WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from Windows® Explorer If a program is not listed in the All Programs menu, you can start it from Windows® Explorer.
Learning the Basics Starting a program 8 Click Accessories. Windows® Explorer shows the contents of the Accessories folder on the right side of the window. 9 In the right part of the window, double-click WordPad. The operating system opens WordPad. To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start WordPad: 1 Click Start, then click Run. The Run dialog box appears.
Learning the Basics Saving your work 3 87 Type WordPad in the Open text box and press Enter. HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list. Saving your work Before you turn off the computer, save your work on the hard disk drive or other writable media. This is one of the most important rules of computing. Always save your data even when you are using Standby mode.
Learning the Basics Saving your work Use this dialog box to specify where to store the document and to give it a file name. Sample Save As dialog box 2 Choose the drive and folder where you want your file to be stored. 3 Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Learning the Basics Printing your work 89 You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and ‘. File names are not case-sensitive and must not contain spaces. Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft® Word saves files with a .doc extension. Any file name with an extension of “.
Learning the Basics Backing up your work To print a file: 1 Make sure your printer is turned on. 2 Open the File menu of your Windows® program and click Print. The program displays a Print dialog box. Sample Print dialog box 3 Specify the print parameters (i.e. the range of pages and number of copies to print. 4 Click Print. Backing up your work Back up all the files you create in case something happens to your computer. If you have a network partition, you can hold copies of your files there.
Learning the Basics Using the libretto® DVD Dock 91 Additional information on the backup program is in the online Help for your operating system. HINT: Backing up all the files on your hard disk takes a considerable amount of time and many diskettes. You may prefer to use a high-capacity backup system, such as an external tape drive. Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program.
Learning the Basics Using the libretto® DVD Dock language tracks, digital surround sound, multiple camera angles, and interactive menus. For these reasons, your computer may come with a libretto® DVD Dock. libretto® DVD Dock control buttons The control buttons on the libretto® DVD Dock let you play audio CDs and DVDs when the computer is on. You can also use them to play CDs and DVDs when the computer is off using the Express Media Player.
Learning the Basics Using the libretto® DVD Dock 93 The Previous track button returns to the preceding track on the disc. The Next track button skips to the following track on the disc. Inserting discs (CD or DVD) To insert a disc into the libretto® DVD Dock drive: 1 Make sure the drive-in-use indicator light is off. 2 Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch). 3 Grasp the disc tray and pull it fully open.
Learning the Basics Playing audio 7 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact your network administrator for assistance. 8 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Playing audio Insert an audio CD and close the disc tray.
Learning the Basics Playing audio 95 Sample Windows Media Player screen The Windows Media® Player control panel works much like an ordinary compact disc player. ❖ To play or pause the CD, click the Play/Pause button on the CD Player control panel. ❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down, and do not set the volume too high when using the headphones. Continuous exposure to loud sound can harm your hearing. 5.375 x 8.
Learning the Basics Powering down the computer Caring for CD or DVD Discs ❖ Store your discs in their original containers to protect them from scratches and keep them clean. ❖ Do not bend a disc or place heavy objects on top of it. ❖ Do not apply a label to or otherwise mar the surface of a disc. ❖ Hold a disc by its outside edge. Fingerprints on the surface can prevent the DVD-ROM drive or multifunction drive from reading the data properly.
Learning the Basics Powering down the computer 97 TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again. Using Turn Off Computer or Shut Down For the Windows XP Professional operating system, follow these steps to shut down the computer: 1 Click the Start button, then Shut down.
Learning the Basics Powering down the computer 3 Select the options you want from the drop-down lists. ❖ When I press the power button Set this option to Shutdown to have the computer shut down when you push the power button. 4 Click Apply. 5 Click OK. Sample system power mode settings NOTE For more information about the Power Saver utility see “Power Management” on page 150.
Learning the Basics Powering down the computer 99 Using Hibernation Hibernation mode shuts the computer down completely, but it first saves the current mode of the computer to the hard disk. Since Hibernation mode does not require power to maintain the saved information, the system settings are retained indefinitely. Restoring information from the hard disk takes longer than restoring it from memory.
Learning the Basics Powering down the computer will go into Hibernation mode when you push the power button. ❖ When I close the lid Set this option to Hibernate so that the computer will go into Hibernation mode when you close the display panel. 4 Click Apply. 5 Click OK. The computer is now set to automatically go into Hibernation when your option settings occur. NOTE For more information about the Power Saver utility see “Power Management” on page 150.
Learning the Basics Powering down the computer 101 Factors to consider when choosing Standby: ❖ While in Standby mode, the computer uses some battery power. A fully charged main battery will last up to eight hours in Standby mode. ❖ Restarting from Standby uses less time and battery power than restarting from Turn off computer or Hibernation. ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using.
Learning the Basics Powering down the computer Going into Standby mode more quickly You can put the computer into Standby mode by either pushing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Standby mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. 1 Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver.
Learning the Basics Toshiba’s online resources 103 Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades. For more information see “Contacting Toshiba” on page 225. 5.375 x 8.375 ver 2.
Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power Standby mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba.
Mobile Computing Running the computer on battery power 105 Running the computer on battery power The computer contains a removable Lithium-Ion (Li-ion) battery pack that provides power when you are away from an AC outlet. This is the main battery. You can recharge it many times.
NOTE Mobile Computing Charging the batteries For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power. Charging the batteries NOTE Battery charge time may vary depending on the applications, power management settings, and features used. The battery needs to be charged before you can use it to power the computer. Never leave batteries in the battery charger for more than a week at a time.
Mobile Computing Charging the batteries 107 Charging the main battery To charge the battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on. TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur.
Mobile Computing Charging the batteries Charging the RTC battery Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and the BIOS memory used to store your computer’s configuration settings. When fully charged, the RTC battery maintains this information for up to a month when the computer is powered off.
Mobile Computing Monitoring battery power 109 Monitoring battery power The computer’s main battery light gives you an indication of the main battery’s current charge: ❖ Green indicates the AC adapter has fully charged the battery. ❖ Amber indicates the AC adapter is charging the battery. ❖ Off indicates that the battery is not being charged. NOTE ❖ Battery life and charge time may vary, depending upon power management settings, applications and features used.
Mobile Computing Monitoring battery power Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery will not power the computer for as long as a new battery, even when both are fully charged. HINT: Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power.
Mobile Computing Changing batteries 111 What to do when the battery alarm sounds Your libretto U100/U105 computer can be configured to warn you of a low battery charge condition so that you can take the necessary steps to save your work. Your Toshiba computer system offers two alarms before your system shuts down. To change the default alarm settings: 1 Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. 2 Click the Setup Action tab.
5 Mobile Computing Changing batteries If the battery release lock is in the locked position, slide it toward the unlocked position. Sample battery release lock 6 Press the battery release latch to release the battery. Sample battery release latch 7 Pull the discharged battery out from the back of the computer. 5.375 x 8.375 ver 2.
Mobile Computing Changing batteries 113 Sample removing the discharged battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury.
Mobile Computing Taking care of your battery 10 Reset the battery release lock to the locked position. 11 Turn the computer right side up. 12 Reconnect any cables. 13 Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Mobile Computing Taking care of your battery 115 ❖ A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. ❖ Charge the battery only in the computer or in a battery charger designated as an approved option. ❖ When you install the battery pack, you should hear a click when it is seated properly. ❖ Do not expose the battery pack to fire. The battery pack could explode.
❖ ❖ ❖ ❖ ❖ Mobile Computing Disposing of used batteries If you have extra battery packs, rotate their use. If you will not be using the system for an extended period, more than one month, remove the battery pack. Disconnect the AC adapter when the battery is fully charged. Overcharging makes the battery hot and shortens its life. If you are not going to use the computer for more than eight hours, disconnect the AC adapter. Store spare battery packs in a cool dry place out of direct sunlight.
Mobile Computing Conserving power 117 Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User's Manual. Other battery packs have different voltage and terminal polarities.Use of non-conforming battery packs could generate smoke or cause fire or rupture, possibly resulting in serious injury. After repeated use, batteries will finally lose their ability to hold a charge and you will need to replace them.
Mobile Computing Conserving power increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset power profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a power profile and discuss each power-saving option.
Mobile Computing Additional options for power 119 2 While continuing to press Fn, press F2 until you select the desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. 3 Release the Fn key. The pop-up window disappears. You are now in the selected mode. For more information on setting the battery power profile see “Power Management” on page 150.
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your libretto U100/U105 notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows® XP Professional operating system. You can use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Exploring Your Computer’s Features Exploring the desktop 121 Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Taskbar Start button System tray Sample Windows® XP operating system desktop Icons An icon represents a folder, file, or program. These items can be quickly activated by double-clicking the icon.
Exploring Your Computer’s Features Exploring the desktop Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer — The Microsoft® browser that provides access to the Internet. NOTE If you place the cursor over an icon, a popup description of the file contents appears.
Exploring Your Computer’s Features Setting up for communications 123 Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to switch quickly between the programs or windows. To make a program or window the currently active one, click the associated taskbar button.
Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need either to upgrade your modem or reset the port to the default settings. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it.
Exploring Your Computer’s Features Setting up for communications 125 6 Click OK to close the properties dialog box for that specific modem. 7 Click OK to close the Modem Properties dialog box. 8 Close the Control Panel. Connecting the modem to a telephone line Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line. The modem allows you to: ❖ Access the Internet.
2 Exploring Your Computer’s Features Setting up for communications Connect the other end to the RJ-11 wall jack. Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet.
Exploring Your Computer’s Features Setting up for communications 127 Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations. To set up a dial-up connection, use the New Connection Wizard: 1 Click Start, All Programs, Accessories, Communications, and then New Connection Wizard. 2 Enter the phone number of your network connection and let the program dial the number. The computer connects to the network.
Exploring Your Computer’s Features Setting up for communications 6 Select the Do not use this device (disable) option from the Device usage drop-down. 7 Click OK. Your LAN port is now disabled. To enable the Ethernet LAN port, repeat steps one through four. Select the Use this device (enable) check box, and click OK. Using Wireless LAN Connectivity NOTE Wireless connectivity and some features may require you to purchase additional software, external hardware or services.
Exploring Your Computer’s Features An overview of using the Internet 129 An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and m
Exploring Your Computer’s Features An overview of using the Internet The World Wide Web offers information as text, images, audio, or video which can be referenced from anywhere in the world. Special programs called Web browsers are specifically designed to work with HTTP. They make it easier to connect to a particular network address and send and receive information.
Exploring Your Computer’s Features An overview of using the Internet 131 Once you have established an ISP account, you can connect to the Internet. 1 Connect your computer’s modem to a telephone line. For more information on connecting a modem see “Connecting the modem to a telephone line” on page 125. 2 Start your Web browser. Have your modem dial the ISP’s telephone number to establish a connection with the ISP’s computer.
Exploring Your Computer’s Features An overview of using the Internet If you have an account with an ISP, you probably set up an email address at the same time that you signed up for the service. ❖ Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one or in groups, by typing messages which are instantly viewed by others on their computer screens.
Exploring Your Computer’s Features Exploring audio features 133 Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones, or external speakers. Recording sounds You may record sounds as .wav files by connecting an external microphone or other sound source to the microphone jack.
5 Exploring Your Computer’s Features Exploring audio features When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform. NOTE You can only record 60 seconds at a time. 6 To hear what you just recorded, click the Play button. 7 To save the file, select Save from the File menu. NOTE The microphone setting on your computer might be set to Mute.
Exploring Your Computer’s Features Inserting and removing PC Cards 135 To play back sound files through external speakers or headphones: 1 Locate the headphone jack on the computer. 2 Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack. The headphone jack requires a 16-ohm stereo mini-jack. To adjust the volume: ❖ For external speakers, use the volume controls on each speaker. ❖ For headphones, use the computer’s volume control dial.
Exploring Your Computer’s Features Inserting and removing PC Cards To insert a PC Card: 1 Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. 2 Locate the PC Card slot on the left side of the computer. 3 Insert the PC Card.
Exploring Your Computer’s Features Using a Secure Digital (SD) card 3 137 Slide the PC Card eject switch to pop the PC card out on the left side of your computer. The PC Card ejects from the slot. 4 Grasp the edges of the PC Card and slide it out of the slot. Sample removing a PC Card Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters may need to be set up to work with your computer.
Exploring Your Computer’s Features Using a Secure Digital (SD) card 3 Create a temporary folder on the hard disk drive. 4 Copy the contents of the source SD card into the temporary folder you created in step 3. 5 Remove the source SD card. 6 Insert the target SD card created in step 1. 7 Copy the file contents from the temporary folder to the target SD card. 8 Eject the target SD card. NOTE MMC cards (multimedia cards) do not work in this slot. Locate the SD card slot on the computer.
Exploring Your Computer’s Features Using a Secure Digital (SD) card 3 139 Press the card inward to release it. The card pops out slightly. 4 Grasp the card and pull it straight out. Another method for removing an SD memory card is as follows: 1 Click the Safely Remove Hardware icon in the system tray. 2 Click Safely Remove SD Memory Card Drive - Drive (D:). 3 When the message displays that it is safe to remove hardware, press the card inward to release it. The card pops out slightly.
Chapter 5 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options.
Toshiba Utilities Fn-esse® 141 Fn-esse® Desktop shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any Windows® program without using the Start menu. For more information on creating desktop shortcuts, refer to the operating system documentation that came with your computer. This section describes how to use the Fn-esse program to quickly access your programs and files.
Toshiba Utilities Fn-esse® The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray. There are two ways to assign a key to open a program or document: ❖ Using drag-and-drop ❖ Using the keyboard or pointing device The method most often used is drag-and-drop.
Toshiba Utilities Fn-esse® 143 Using the keyboard or pointing device to assign keys To assign a key to open a program or document, start Fn-esse and either: ❖ Using the keyboard, press and hold the Fn key, then press the desired assignment key. ❖ Using the pointing device, move the cursor over the desired key in the Fn-esse window and press the secondary button. The Assignment Type dialog box appears. Sample Fn-esse assignment type dialog box Making a direct key assignment 1 Select Direct...
Toshiba Utilities Fn-esse® Making a popup assignment 1 Select Popup... to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder. These are the items that will appear in the popup list.
Toshiba Utilities TOSHIBA Assist 145 Changing or removing existing key assignments In the Fn-esse keyboard, click the key you wish to change with the secondary button. Fn-esse displays the Assignment Type dialog box. ❖ To change the key assignment, click Direct... or Popup... and continue as if you were creating a new assignment. ❖ To remove the key assignment, click Clear.
Toshiba Utilities TOSHIBA Assist The TOSHIBA Assist offers four categories of features: ❖ Connect ❖ Secure ❖ Protect & Fix ❖ Optimize Connect The options available in this category are: ❖ ConfigFree (see “Using ConfigFree™ with your Toshiba Computer” on page 234) ❖ Start Bluetooth ❖ Bluetooth Settings ❖ Bluetooth Local COM Settings ❖ Toshiba Applications Secure The options in this category are: ❖ Supervisor password (see “Setting user passwords” on page 155) ❖ User password (see “
Toshiba Utilities TOSHIBA Assist 147 Sample TOSHIBA Assist window, Secure tab Protect & Fix This category provides access to the PC Diagnostic Tool. Optimize The features available in this category are: ❖ Power Management ❖ SD Memory Card Format ❖ Mouse Utility ❖ TOSHIBA Accessibility ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Button Controls ❖ CD/DVD Drive Acoustic Silencer ❖ Hotkey Assignment (for detailed information see “Fn-esse®” on page 141) ❖ TOSHIBA Hardware Setup 5.375 x 8.375 ver 2.
Toshiba Utilities PC Diagnostic Tool PC Diagnostic Tool This utility can help diagnose problems with devices in your computer. Refer to the online help documentation within the application for additional help. To start the utility: 1 Click Start, All Programs, Toshiba, Utilities, and then PC Diagnostics. The system displays the PC Diagnostic Tool. Sample PC Diagnostic Tool, Basic Information tab 5.375 x 8.375 ver 2.
Toshiba Utilities Quick Launch Utility 2 149 Click the Diagnostic Tool tab. Sample PC Diagnostic Tool, Diagnostic Tool tab 3 NOTE 4 Select the devices that you would like to test by clicking the check box that appears to the left of the device. Click the + (plus) and - (minus) symbols to expand and collapse the categories. Click Start Diagnostics when you are ready to begin the tests. Quick Launch Utility This utility allows you to add the programs you use most often to a Quick Launcher toolbar.
Toshiba Utilities Power Management Power Management NOTE Toshiba recommends that you use the Toshiba Power Management Utility to change system power settings. The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the TOSHIBA Assist, click the Power Management icon. The TOSHIBA Power Saver Properties window appears.
Toshiba Utilities Power Management 151 By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK you can reconfigure that function. Any options that you change become effective when you click either OK or Apply. Profiles The preset profiles are: ❖ Long Life ❖ Normal ❖ High Power ❖ DVD Playback ❖ Presentation ❖ Full Power Although you can change the properties for any of these profiles, this is not recommended.
Toshiba Utilities Power Management Customizing a power mode 1 Highlight the profile on the Profiles window. 2 Make the desired changes to settings on the Basic Setup and Setup Action tabs. 3 Click Apply. 4 Click OK. Mouse Utility The Mouse utility allows you to change your Accupoint II pointing device or mouse settings. To access the Mouse utility through the TOSHIBA Assist, click the Mouse icon.
Toshiba Utilities Power Management 2 Put a check mark next to the desired option. 3 Click OK. 153 TOSHIBA Hardware Setup TOSHIBA Hardware Setup is the Toshiba configuration management tool. To access it: In the TOSHIBA Assist, click Optimize, then click Toshiba Hardware Setup. Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: ❖ General—Allows you to view current BIOS, hard disk drive, and memory settings.
❖ Toshiba Utilities Power Management CPU—Allows you to enable or disable CPU frequency switching modes. ❖ Dynamically Switchable—This mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: AC Power. If your computer is connected to the AC adapter, the CPU frequency mode is set to high for faster processing. Battery Power.
Toshiba Utilities Setting user passwords 155 Setting user passwords Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily. ❖ A power-on password — Prevents unauthorized users from starting or restarting the computer.
Toshiba Utilities Setting user passwords To unlock your system, press Enter and the Windows Logon screen will appear. Select your user name and enter your password, if any. Setting a user password To register a password for the power-on password functions: 1 Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. 2 On the left side, select Secure. 3 Select the User Password icon. 4 Click Registered. 5 Type your password in the Password box.
Toshiba Utilities Using a supervisor password 157 Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Toshiba Utilities HDD Protection 3 Select the Supervisor Password icon. 4 Click Registered. 5 Type your password in the Supervisor Password box. 6 Retype your password in the Supervisor Password again box. 7 Click OK. Deleting a supervisor password To cancel the power-on password function: 1 Click Start, All Programs, and then TOSHIBA Assist. The TOSHIBA Assist window appears. 2 On the left side, select Secure. 3 Select the Supervisor Password icon. 4 Select Not Registered.
Toshiba Utilities HDD Protection 159 The TOSHIBA HDD Protection Properties window appears. Sample TOSHIBA HDD Protection Properties window 2 Set the HDD protection settings as you desire, or select the default settings by clicking Default. 3 For additional settings, click Setup Detail and choose the desired settings. 4 To enable one-click access to HDD Protection, select the Display icon on the Notification area (Taskbar) check box. Click Apply, then OK. 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Zooming Utility TOSHIBA Zooming Utility This application allows you to zoom in or out of a specific list of applications (see below).
Toshiba Utilities CD/DVD Drive Acoustic Silencer 161 CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen This utility, available on Toshiba Assist, can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable. NOTE When you change the CD/DVD drive to “Quiet” mode, the setting is only valid for the current Windows session.
Toshiba Utilities TOSHIBA Accessibility To change the setting, open the Acoustic Silencer by doubleclicking the tasktray icon. 1 Click Set Quiet Mode to make the drive run more slowly and quietly, for listening to Music CDs or Audio files on a CD. 2 Click Set Normal Mode to run the drive at normal speed, for transferring data.
Toshiba Utilities TOSHIBA SD Memory Boot Utility 163 To open Accessibility: 1 Click Start, All Programs, Toshiba, Utilities, and then Accessibility. The TOSHIBA Accessibility window appears. 2 Check the Use Fn-StickyKey box. 3 Put a check mark next to the desired option. TOSHIBA SD Memory Boot Utility The TOSHIBA SD Memory Boot Utility allows you to create an SD card you can use to boot up your computer.
Toshiba Utilities TOSHIBA SD Memory Boot Utility The TOSHIBA SD Memory Boot Utility screen appears. Sample TOSHIBA SD Memory Boot Utility screen 4 Select the drive where the SD is located. 5 Select the Read from a floppy disk option. 6 Click the Start menu. NOTE To create a bootable SD with the Read from an image file option, you need a third-party application.
Toshiba Utilities Fingerprint recognition utility 165 5 During the boot process, press the F12 key. The system displays the Boot menu. 6 Use the arrow keys to select the SD/Floppy icon. 7 Press the Enter key. Fingerprint recognition utility Your computer features OmniPass™, a utility that allows you to use a single master password for all Windows® passwords, application passwords, and online passwords.
Toshiba Utilities Fingerprint recognition utility fingerprint recognition technology to verify your identity so no one else can use your master password even if they know what it is. To use OmniPass, you need to establish a master password, and register two fingerprints (from two separate fingers) which OmniPass will use to verify your identity. Then, you provide OmniPass with the appropriate information for each user account (application programs, Web sites, etc.
Toshiba Utilities Fingerprint recognition utility 167 To enroll in OmniPass, perform the following steps: 1 Click Start, then select All Programs, Softex, OmniPass Enrollment Wizard. 2 The enrollment wizard displays the welcome screen. Click Enroll to continue. Sample OmniPass welcome screen NOTE The first time you use your computer, OmniPass runs automatically. At that point, however, you do not yet have a Windows password. Therefore, DO NOT click Enroll in the welcome screen.
3 Toshiba Utilities Fingerprint recognition utility The wizard displays your Windows user name and domain. Enter your Windows password. This password will become your master password. Click Next to continue. Sample verify user name and password screen 4 The Choose Finger screen appears. Select the finger you wish to enroll, then click Next. Sample Choose Finger screen 5.375 x 8.375 ver 2.
Toshiba Utilities Fingerprint recognition utility 5 169 The Capture Fingerprint screen appears. This screen controls the process of capturing your fingerprint. Sample Capture Fingerprint screen 6 Swipe your fingertip on the fingerprint sensor (located to the right of the computer’s Accupoint® II) as follows: ❖ Align the first joint of the finger to the center of the sensor.
Toshiba Utilities Fingerprint recognition utility The Capture Fingerprint screen lets you try up to three times to capture your fingerprint. If you fail to capture your fingerprint after three tries, click Back to return to the Choose Finger screen, then click Next and restart the capture process. 7 The Verify Fingerprint screen appears. To verify your fingerprint, swipe your finger on the sensor.
Toshiba Utilities Fingerprint recognition utility 171 Sample Audio and Taskbar Settings screen 10 The Congratulations screen appears indicating successful completion of enrollment. Click Done to exit. Sample Congratulations screen 11 OmniPass asks if you would like to log on the new user. Click Yes to continue. 5.375 x 8.375 ver 2.
Toshiba Utilities Fingerprint recognition utility Sample Log on New User screen Replacing your passwords OmniPass Authentication Toolbar When OmniPass is enabled, the Authentication Toolbar appears at each login for the functions that you selected in the Set Authentication Rules screen. NOTE For example, if you selected Windows and OmniPass Logon, the Authentication Toolbar appears during Windows or OmniPass login, when you unlock your computer, resume from Standby or Hibernate mode, etc.
Toshiba Utilities Fingerprint recognition utility 173 Sample Authentication Toolbar ❖ Function: This indicates the function that is being attempted (Login User or Access). ❖ Additional information: Additional instructions or information are displayed during authentication. ❖ Fingerprint capture window: This shows the results of fingerprint authentication. ❖ Available means of authentication: These icons indicate the types of authentication that are available for use.
Toshiba Utilities Fingerprint recognition utility OmniPass is used to remember the login credentials for many different resources. To use the Remember Password procedure to cause OmniPass to remember the login credentials for a resource: 1 Bring up the application, or direct your web browser to access the Web site. 2 When prompted to log in, enter all of the requested information, such as user name and password, but DO NOT LOG IN yet (e.g., do not click Enter, OK, etc.).
Toshiba Utilities Fingerprint recognition utility 175 7 Under Settings for this Password Site, select the settings you want OmniPass to use when accessing this application or Web site. For a detailed explanation of these settings, see “Authentication settings” below. 8 Click Finish to end the Remember Password procedure. 9 OmniPass automatically logs you in to the application or Web site.
Toshiba Utilities Fingerprint recognition utility Automatically enter this password protected site when it is activated. Do not prompt for authentication. This option is less secure than the previous one. If this is selected, each time you navigate to this site, OmniPass logs you into the site without prompting for authentication. NOTE This setting makes accessing a site convenient—whenever you go to the site, you bypass all authentication procedures and gain instant access to the site.
Toshiba Utilities Fingerprint recognition utility 177 ❖ Once you gain access to Vault Management, click Manage Passwords under Vault Settings on the left side of the window. ❖ The Manage Passwords interface appears, as shown below. Sample Manage Passwords interface screen OmniPass user identities User identities allow an OmniPass user to have multiple accounts with the same resource. For example, you can have two e-mail accounts, one for work use and the other for personal use, on a single Web site.
❖ Toshiba Utilities Fingerprint recognition utility Once you gain access to Vault Management, click Manage Identities under Vault Settings (as shown above). Only the identities of the currently logged in OmniPass user can be managed. To add a new identity: ❖ Click New Identity or double-click . ❖ Name the new identity and click OK. ❖ Click Apply to ensure the settings are saved. ❖ You can now switch to the new identity and start remembering passwords.
Toshiba Utilities Fingerprint recognition utility 179 Choosing user identity during login To choose your identity during login: ❖ Enter your user name in the User Name field and press Tab. The Domain field should fill in automatically. ❖ Click the Password field to place the cursor in it. A pulldown menu will appear in the Identity field. ❖ Select the identity you wish to login as, then click OK.
❖ Toshiba Utilities Fingerprint recognition utility The Switch Identity dialog appears. Select the desired identity, then click OK. Sample Select Identity screen Identities and password management The Manage Passwords interface (see “Password management” on page 176) contains a pull-down selection box labeled Identity. This field lets you choose the identity whose passwords you wish to manage.
Toshiba Utilities Fingerprint recognition utility 181 Care and maintenance of your fingerprint sensor Failure to follow these guidelines and/or procedures might result in (1) damage to the sensor or cause sensor failure, (2) finger recognition problems, or lower finger recognition success rate. ❖ Do not scratch or poke the sensor with your nails or any hard or sharp objects. ❖ Do not press the sensor strongly. ❖ Do not touch the sensor with a wet finger or any wet objects.
Toshiba Utilities Fingerprint recognition utility ❖ Wet finger ❖ Soiled or oily finger ❖ Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate. ❖ Enroll two or more fingers. ❖ Enroll additional fingers if recognition failure occurs often using enrolled fingers. ❖ Check your finger condition.
Toshiba Utilities Fingerprint recognition utility 183 Fingerprint sensor limitations ❖ The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficiently unique characteristics in their fingerprints. ❖ A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration.
Chapter 6 If Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of a software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems that are easy to fix 2 185 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step. 4 Close the remaining programs one by one by selecting the program name, then End Task.
If Something Goes Wrong Problems when you turn on the computer To record the details: 1 Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. 2 Press Ctrl and c simultaneously to copy the text to the clipboard. 3 Open Notepad (click Start, All Programs, Accessories, and then Notepad). 4 Press Ctrl and v simultaneously to paste the details into Notepad.
If Something Goes Wrong Problems when you turn on the computer 187 The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text, and try typing again. Your computer may be in Standby mode and have a software or resource conflict. When this happens turning the power on returns you to the problem instead of restarting the system. To clear the condition, press Ctrl, Alt, and Del simultaneously.
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more information see “Charging the batteries” on page 106. The computer displays the Non-System disk or disk error message. Make sure there is no diskette in the optional external diskette drive.
If Something Goes Wrong The Windows® operating system is not working 189 Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. To open the Startup menu: 1 Restart your computer. 2 Press F8 when your computer starts and before Windows starts loading.
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access. If accessing a particular site is very slow, try later. My browser cannot find the URL address I typed in.
If Something Goes Wrong Resolving a hardware conflict 191 You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows® Help and Support to troubleshoot the problem first. For help on hardware conflicts: 1 Click Start, then click Help and Support. 2 Click the Hardware link in the window’s left pane.
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works. These channels of communication are commonly referred to as system resources.
If Something Goes Wrong Resolving a hardware conflict 193 If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: ❖ Get the most recent drivers from the manufacturer. ❖ Disable the device. For an older device, remove it from the computer.
If Something Goes Wrong Resolving a hardware conflict Disabling a device 1 Click Start, Control Panel, Performance and Maintenance, Administrative Tools, Computer Management, and then Device Manager. 2 Select the specific device from the device category. To expand a device category, double-click the category. 3 In the toolbar, look to the far right for an icon of a monitor with a strike mark through a circle on the front. This is the disable feature. 4 Click the icon.
If Something Goes Wrong Resolving a hardware conflict 195 ❖ The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions. This tab does not appear if the device is not using resources. ❖ The Driver tab, which displays the drivers being used by the device. The tabs that appear in the dialog box vary from one device to another. A Troubleshooting button is also present. 4 Click Troubleshoot...
If Something Goes Wrong Resolving a hardware conflict 5 Check for the error again. 6 If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
If Something Goes Wrong Resolving a hardware conflict 197 The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery. See “Changing batteries” on page 111. The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again.
If Something Goes Wrong Resolving a hardware conflict current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Charging the main battery” on page 45. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected characters. A keypad overlay may be on.
If Something Goes Wrong Resolving a hardware conflict 199 Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing Fn and F1 simultaneously. If you have registered a password, press any key, type the password and press Enter. If no password is registered, press any key.
If Something Goes Wrong Resolving a hardware conflict The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box. The Appearance tab of this dialog box allows you to choose the colors for the screen. The Settings tab allows you to choose the screen resolution. The built-in screen flickers.
If Something Goes Wrong Resolving a hardware conflict 201 The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode. Small bright dots appear on your TFT display when you turn on your computer. Small bright dots may appear on your screen display when you turn on your PC.
If Something Goes Wrong Resolving a hardware conflict To run Error-checking: 1 Click Start, then click My Computer. 2 Right-click the drive you want to check. The drive’s Properties box appears. This feature is not available for CD/DVD drives. NOTE 3 Click the Tools tab. 4 Click the Check now button. The Check Disk All Apps box appears. 5 6 You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start.
If Something Goes Wrong Resolving a hardware conflict 203 Some programs run correctly but others do not. This is probably a configuration problem. If a program does not run properly, refer to its documentation and check that the hardware configuration meets its needs. A diskette will not go into the optional external diskette drive. You may already have a diskette in the drive. Make sure the drive is empty. You may be inserting the diskette incorrectly.
If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly. Press gently until it clicks into place. Open the tray and remove the disc. Make sure the tray is clean. Any dirt or foreign object can interfere with the laser beam. Examine the disc to see if it is dirty. If necessary, wipe it with a clean cloth dipped in water or a neutral cleaner.
If Something Goes Wrong Resolving a hardware conflict 205 Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVDROM, DVD-R (read-only), plus CD-ROM, CD-R (readonly), and CD-RW (read-only). If the problem is with a data CD or DVD, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. See “Resolving a hardware conflict” on page 191. Card Information Structure When you insert a PC Card into a slot the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
If Something Goes Wrong Resolving a hardware conflict 207 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: 1 Click Start. 2 Click My Computer icon with the secondary button, then click Properties. The System Properties dialog box appears. 3 Click the Hardware tab. 4 Click the Device Manager button. 5 Double-click the PCMCIA adapter.
If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: 1 Double-click the PC Card icon on the taskbar. 2 Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system displays a message that you may safely remove the card. 3 Remove the card from the slot.
If Something Goes Wrong Resolving a hardware conflict 209 Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the printer cable is firmly attached to the computer and the printer.
If Something Goes Wrong Resolving a hardware conflict Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the port settings to make sure the hardware and software are referring to the same COM port. See “Determining the COM port” on page 124.
If Something Goes Wrong Resolving a hardware conflict 211 Wireless device problems NOTE This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi) networking. The terms and concepts used assume a basic understanding of networks, and may be for more advanced users. If you need assistance or if you are not familiar with the terminology, please see Windows Help and Support or contact your computer technician.
If Something Goes Wrong Resolving a hardware conflict ❖ Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows®, and that the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time. ❖ Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: 1 Click Start, Control Panel. 2 Double-click Network Connections.
If Something Goes Wrong Resolving a hardware conflict ❖ 213 Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter. ❖ If “Request Timed Out” or another error message appears in response, then the problem is probably Wi-Fi-related.
❖ If Something Goes Wrong DVD operating problems Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
If Something Goes Wrong DVD operating problems 5 215 Verify that your computer recognizes your DVD-ROM drive. To do this: Double-click the My Computer icon on the desktop. The DVD-ROM drive should appear in the list. 6 See “Checking device properties” on page 194 for instructions on using Device Manager to view the DVDROM properties. 7 Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
If Something Goes Wrong DVD operating problems DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: 1 Right-click the Desktop, select Properties. 2 Select the Settings tab. 3 Select the Advanced Flat Panel tab. 4 Click Disable Display Stretch Feature. 5 Click OK. The screen saver runs while you are watching a movie or title.
If Something Goes Wrong Develop good computing habits 217 Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 78 for instructions. On a regular basis, back up the information stored on your hard disk.
If Something Goes Wrong Develop good computing habits Your local computer store or book store sells a variety of selfhelp books you can use to supplement the information in the manuals. Data and system configuration backup in Windows XP Windows XP offers some easy-to-use features for backing up your Windows settings and your data – documents and other important files.
If Something Goes Wrong Develop good computing habits 219 5 In the Restore point description field, enter a name that is descriptive enough to be easily understand in the future, such as “Before installing Brand X Accounting app”. Then click Create. 6 Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point. To do this: 1 Click Start. 2 Click Help and Support.
If Something Goes Wrong Develop good computing habits Backing up your data to CDs with Windows XP For most of us, by far the most valuable component of our computer system is the data we’ve created with it, and stored on its hard disk drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your computer system may be a recent backup of your data.
If Something Goes Wrong Develop good computing habits NOTE 221 Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖ E-mail files and settings—for Outlook, Outlook Express, or other e-mail apps. Visit the vendors’ Web sites (www.microsoft.com, for example) for detailed instructions.
If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): 1 In Internet Explorer, click File, Import and Export. 2 The Import/Export Wizard will appear. Click Next. 3 Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.
If Something Goes Wrong Develop good computing habits 223 General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser). ❖ Create a Restore Point (see “Saving system configuration with Restore Points” on page 218).
If Something Goes Wrong If you need further assistance 1 Back up critical data. 2 Create a Restore Point. 3 Install one item of hardware or software. 4 Restart Windows. 5 Use the new hardware or software for awhile, noting any new problems. Make sure that your critical applications (e-mail, business apps, etc.) are working correctly, and verify that important devices are still functioning.
If Something Goes Wrong If you need further assistance ❖ 225 Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. Detailed system specifications are available at www.ts.toshiba.com by selecting your particular product and model number, clicking GO, and then clicking the Detailed Specs link from the menu on the left. You can also refer to the computer documentation shipped with your product.
❖ If Something Goes Wrong Other Toshiba Internet Web sites Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA accessories.toshiba.com Accessories information in the USA www.toshiba.ca Canada www.
If Something Goes Wrong Toshiba’s worldwide offices 227 Italy Centro Direzionale Colleoni Palazzo Perseo Via Paracelso 10 20041, Agrate Brianza Milano, Italy Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Latin America and Caribbean Toshiba America Information Systems 9740 Irvine Blvd. Irvine, California 92618 USA Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 228 5.375 x 8.375 ver 2.
Hot Keys Instant password security 229 Instant password security Fn + This hot key blanks the display. When the display re-appears, select your user name and enter the correct password if you have created one. Power usage profile Fn + This hot key displays the power usage pop-up window and cycles through the profiles. The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life.
Hot Keys Standby mode Standby mode Fn + This hot key puts the computer into Standby mode. A message box is displayed by default to confirm that the computer is going into Standby mode. This message box can be set so it does not display. Sample Standby confirmation box For more information about Standby mode, please see “Using Standby” on page 100. Hibernation mode Fn + This hot key puts the computer into Hibernation mode.
Hot Keys Display modes 231 Display modes Fn + This hot key cycles through the power-on display options. The display modes are: ❖ Built-in display panel only ❖ Built-in display panel and external monitor simultaneously ❖ External monitor only Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. 5.375 x 8.375 ver 2.
Hot Keys Display brightness Display brightness Fn + This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness. Keyboard hot keys Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off. Fn + This hot key turns the scroll lock feature on and off. Fn + This hot key turns the Zooming utility to zoom-out. For more information, see “TOSHIBA Zooming Utility” on page 160.
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia Europe AS approved VDA approved NEMKO approved 233 5.375 x 8.375 ver 2.
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks. NOTE For more information on using ConfigFree, see the ConfigFree online Help.
Using ConfigFree™ with your Toshiba Computer Getting Started 235 ❖ Profile Settings—The Profiles utility lets you switch between network configurations. For more information, see “Profile Settings” on page 245. ❖ ConfigFree SUMMIT—The ConfigFree SUMMIT utility is used to connect with other ConfigFree users for file sharing. For more information, see “ConfigFree SUMMIT” on page 248. ConfigFree also includes a screen saver that you can customize by adding identifying text to devices.
❖ NOTE Using ConfigFree™ with your Toshiba Computer Getting Started Click the ConfigFree icon click the desired utility. on the taskbar, and then If your computer is not connected to a network, the ConfigFree icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 237 Sample ConfigFree Launcher Auto-hide mode setting Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer. 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The Connectivity Doctor works with the following network devices: ❖ Wired and wireless network devices ❖ Routers, hubs, and bridges ❖ Access points The Connectivity Doctor displays the following information: ❖ WEP (Used, not Used) ❖ Wired connection line (link speed) ❖ Wireless connection line (signal strength and link speed) ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 239 Sample viewing device information If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location. You can also view the possible cause and solution for the problem by clicking the exclamation point.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The following checkboxes and buttons are provided on the Connectivity Doctor screen: Stay on the task tray When checked, the ConfigFree icon resides in the system tray. Options Displays ConfigFree setting screen. Log Lets you create a diagnostic log, view a history of log files, or delete the history. Log files are saved as CFhtmlxxxxx.htm, where xxxxx is the creation date and time.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 241 For Wi-Fi networks, the intensity of a signal is displayed in five levels or “bands.” The signal from the connected access point is displayed in the bands surrounding the PC icon at the center of the map. The closer to the center, the stronger the connection. Placing the pointer over the displayed “point of light” shows detailed information about the wireless device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a new wireless connection NOTE This feature is only supported on systems running Windows XP SP2. To add a new wireless connection to an Access Point: 1 Open the Search for Wireless Devices option from ConfigFree Launcher. 2 Drag and drop the device you want to connect to the PC icon at the center of the map. The Wireless Settings screen appears.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 3 NOTE 243 Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection list, the system displays the Connection screen rather than the Wireless settings screen. Creating a detected device wireless connection The following screen shows an example of Bluetooth® devices that are detected using the Search for Wireless Devices option.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Transferring files using Bluetooth® There are several ways to use Bluetooth to send files to other devices. To select the device using the Bluetooth radar screen: ❖ Open the Bluetooth radar screen, and drag and drop the file directly onto the icon for that Bluetooth device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 245 Sample selecting Send to Bluetooth Devices option 2 Choose a file recipient. 3 Click Send. NOTE During a file transfer, connecting and disconnecting to the selected device will occur automatically. Disconnecting from a Bluetooth® device To disconnect from a Bluetooth device: 1 Place the cursor on top of the connected line. The icon changes to a pair of scissors. 2 Click to disconnect from the device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: ❖ Internet settings — includes LAN settings (proxy server settings) and the address of a home page that opens automatically when Internet Explorer starts.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 247 8 Click the icon at the bottom of the screen to display more capture options. 9 Under Captured Items, select the items you want to capture for this profile. 10 If connecting with a wireless network, select the desired Auto Switch Settings. (These options are unavailable if wireless devices have been disabled.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen NOTE The online help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported. This feature is useful when transferring profile settings to other computers.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 249 The SUMMIT utility uses the following types of connections: ❖ Wireless LAN via Access Point ❖ Wireless LAN via Ad-Hoc ❖ LAN (same subnet) ❖ Bluetooth® PAN/LAP ❖ Cross cable (Ethernet or Gbit Ethernet) To host a ConfigFree SUMMIT, click the SUMMIT icon on the ConfigFree Launcher, select the users that you want to attend the SUMMIT meeting, and send them an invitation.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon. NOTE Only the SUMMIT Host (the initiator) can share files with multiple user’s by this method. SUMMIT user’s can share a file with only one other user. Sample of sharing a file with one user 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 251 ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. NOTE If you are the Host of the summit, and drag a file to the center of the SUMMIT table, it will automatically be sent to all SUMMIT users who can then accept or decline the file as desired.
2 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE 3 Select the appropriate users and invite them to the SUMMIT meeting. As users join the SUMMIT, their icons appear on the SUMMIT table. 4 Use drag and drop to share documents with SUMMIT users: ❖ To share a file with one user, drag the file to the user’s icon.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 253 Quick Connect The Quick Connect feature includes two options: ❖ Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector ❖ Direct Link Toshiba Device. Launches ConfigFree SUMMIT Toshiba Wireless Projector The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 3 Complete the settings. Refer to the online help if necessary. 4 Click OK. NOTE The default connection setting is for Ad hoc mode, therefore, if the setting on the Toshiba Wireless Projector is in Infrastructure mode, it will not connect, however; you can change the settings to Infrastructure mode to match the settings on the projector.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 255 ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device. ❖ If you close ConfigFree. Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in ad-hoc (peer-to-peer) mode and use the Summit feature. To use this feature: 1 Display the ConfigFree menu.
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home. The Auto Switch feature contains options for automatically switching between wired and wireless devices.
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature 257 Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile. To use the Semi-Automatic Switch feature: 1 Right-click the icon in the system tray. 2 Click Auto Switch.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS complementary metal-oxide semiconductor COM1 communications port 1 (serial port) COM2 communications port 2 (serial port) CPU central processing unit 258 5.375 x 8.
Glossary DC direct current DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc 259 DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IEEE Institute of Ele
Glossary RAM random access memory RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface DDRAM double data random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms These terms may appear in this user’s guide.
Glossary 261 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
Glossary byte — A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. C cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD — An individual compact disc. See also CD-ROM.
Glossary 263 controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Glossary disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads.
Glossary 265 DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. E emulation — A technique in which a device or program imitates another device or program. enable — To turn on a computer option. See also disable. executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files.
Glossary format — (verb) To prepare a blank disk for use with the computer’s operating system. Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it. frontside bus — The primary pathway (bus) between the CPU and the computer’s main memory. Also called “system bus.” See also bus. function keys — The keys labeled F1 through F12, typically located on the keyboard.
Glossary 267 high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in which certain keys in combination with the Fn key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping — The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change.
Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it. A filter over the electrodes permits only non-polarized light to pass to the surface of the display, creating light and dark pixels.
Glossary 269 multi-function drive—A DVD drive that can read and write to CD and DVD media. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. N network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail.
Glossary peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU. pixel — Short for “picture element.” The smallest dot that can be produced on a screen or printer. Plug and Play — Generally, refers to the computer’s ability to automatically configure itself to work with peripheral devices.
Glossary 271 resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically. restart — Synonymous with reboot. To reset the computer by reloading the operating system without turning the computer off. See also boot. RJ-11 — A modular connector used on most U.S.
Glossary system disk — A diskette that contains the operating system files needed to start the computer. Any diskette can be formatted as a system disk. A system disk is also called a “bootable disk” or a “startup disk.” Compare non-system disk. system prompt — The symbol (in MS-DOS®, generally a drive letter followed by a “greater than” sign) indicating where users are to enter commands. T U TFT display — See active-matrix display.
Index Numerics 101-key keyboard 80 A AC adapter 42 AC power cord/cable connectors 233 Accessibility 162 accessories memory 48 optional writable external optical media drive 54 Accupoint II pointing device 64 Acoustic Silencer 161 Adding external devices 41 adding memory 49 adjusting recording quality 134 Alt keys 81 applications installing 63 assign keys Fn-esse 143 audio .
Index See also Toshiba Hardware Setup button power 48, 55 start 122 buttons CD Player 95 C CD Player control panel 95 CD/DVD Drive Acoustic Silencer 161 channels DMA 192 IRQ 192 character keys 80 charging main battery 107 charging the battery 45 checking device properties 194 communications network connection 126 system resources 192 computer non-system disk or disk error message 188 not accessing disk drives 187 setting up 38, 49 turning off 65 warning resume failure message 187 computer setup 38 co
Index display output settings 70 display panel closing 65 display, external adjusting 71 disposal information 20 disposing of used batteries 116 DMA (Direct Memory Access) 192 drivers installing 63 DVD player general problems 214 DVD-ROM drive opening 93 problems 204 troubleshooting 204 DVD-ROM/multi-function drive problems 204 E energy saving features 104 error messages device driver conflict 191 general hardware problem 191 non-system disk or disk error 188, 203 problem with display settings/ current se
Index Windows XP 190 Hibernation enabling 150 Hibernation mode 99 configuring 99 starting again from 100 Hibernation mode hot key 230 hot key Display brightness 232 display modes 231 Hibernation mode 230 Instant password security 229 instant password security 229 keyboard overlays 232 power usage mode 118, 229 Power usage profile 229 Standby mode 230 utility 152 volume mute 228 hot key utility 152 hot keys 228 I icon 121 desktop 121 Internet Explorer 122 moving to desktop 121 recycle bin 122 safety 3
Index troubleshooting 198 using 80 Windows special keys 82 L LCD power-saver 66 libretto DVD Dock 67 M memory adding 48, 49 expansion slots 49 problem solving 195 removing expansion slot cover 51 memory cards Secure Digital 138 memory module inserting 51 installation 49 removing 53 microphone 133 modem determining COM port 124 problem solving 210 resetting port to default settings 124 upgrading 124 monitor 69 connecting 69 not working 199 mouse installing 72 serial 72 N network accessing 126 Dial-Up Net
Index computer will not start 186 options 119 problem solving 196 taking care of your battery 114 turning on 47 universal power supply 233 power button 48, 55 power mode creating new 151 customizing 152 power source 42 power usage mode hot key 118 power usage mode hot key 229 power usage modes 118 Power usage profile hot key 229 powering down using Standby 101 precautions 35 primary button 64 printer Add Printer Wizard 73 local, connecting 72 problem solving 209 printing a file 90 problem solving AC p
Index system resources 192 trouble prevention 217 URL address not found 190 warning resume failure 187 Windows will not start 187 Windows XP not working 188 program, starting 84 programs not running correctly 203 projector 69 connecting 69 protection of stored data 2 Q Quick Launch Utility 149 R recharging main battery 107 recording .
Index system tray 123 T taskbar 123 television adjusting display 71 Toshiba Internet Web sites 226 worldwide offices 226 TOSHIBA Accessibility 162 Toshiba Dual Pointing Device 64 Toshiba online resources 103 TOSHIBA SD Memory Boot Utility 163 Toshiba utilities 140 TOSHIBA Zooming Utility 160 troubleshooting DVD player general problems 214 DVD-ROM drive 204 external keyboard 198 keyboard 198 keypad overlay 198 turning off the computer 65 turning on the computer 48 turning on the power 47 U U100 delet
