AV732* LV732* DIGITAL Series
English Contents Safety Precautions.....................4 Getting Started............................19 Air Circulation....................................... 4 Auto Installation.................................... 19 Heat Damage....................................... 4 Setting the Channels..................20 Mains Supply........................................ 4 Auto Tuning.......................................... 20 Do......................................................... 4 Do not..........
Sleep Timer.......................................... 40 Digital Noise Reduction........................ 31 EPG Timer............................................ 41 Active Backlight.................................... 31 Input Selection..................................... 41 Automatic format (Widescreen)............ 31 Parental Lock....................................... 42 Picture Still........................................... 31 Change Password................................
English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can support the weight of the TV. As an additional safety measure you can secure the TV to the level surface or a wall, as shown in the illustration, using a sturdy strap.
English The Remote Control 1 2 3 4 5 6 7 8 9 10 11 Simple at-a-glance reference of your remote control.
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the power cord into the AC-IN socket found at the back of the TV. HDMI 1 INPUT SOCKET SERVICE PORT Service port is for service personnel only. Do not use it. HDMI 2 INPUT SOCKET For 32AV732**/32LV732** HDMI 1 INPUT SOCKET SERVICE PORT Service port is for service personnel only. Do not use it.
English Aerial cables: - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. The phono sockets alongside the VIDEO INPUT socket will accept L and R audio signals. These sockets are located on the side of the TV. HDMI® (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital audio and video output.
The basic functions of connected audio/video equipment can be controlled using the television’s remote control if a REGZA-LINK compatible device is connected.
English Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
English HDMI device HDMI out HDMI cable (not supplied) For 40LV732** To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.
English To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audio cables to the PC/HDMI1 (AUDIO) socket (see illustration). • The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m). • An HDMI-to-DVI adapter cable transfers video only. • Separate analogue audio cables are required for audio receivers.
English Audio cable for HDMI to television connection (not supplied) HDMI-to-DVI adapter cable (not supplied) DVI device For 40LV732** To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the television first, and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
English Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and an analogue audio cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.
English the back of your television Computer HDMI-to-DVI adapter cable (not supplied) 2 Audio cable for PC to television connection (not supplied) For 40LV732** For acceptable PC and video signal formats, see page 14. Note: • The edges of the images may be hidden. • If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
English Acceptable Video signals through HDMI terminals Resolution H. Frequency (Hz) V. Frequency (Hz) 480i 15.734 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000 1080p 27.000 24.000 1080p 28.125 25.000 1080p 33.750 30.000 1080p 56.250 50.000 1080p 67.500 60.
While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
English Switching On If the RED LED is unlit check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. Using the Remote Control To set up the television you will now need to use the on screen menus. Press MENU on the remote control to see the menus.
English Getting Started Make sure to connect the aerial cable, and select TV as the input source. To set up the television use the buttons on the remote control as detailed on page 4. Auto Installation To start Auto Tuning, press For first use, plug in the television and press the button. The Auto Installation screen will appear.
English Setting the Channels Note: When Parental Block is activated, the 4-digit password is needed to enter Channel Allocation under Setup menu. Auto Tuning DVB-T mode Press MENU and press ▲ or ▼ to select Setup and press ► to enter the submenu. The Auto Tuning will completely re-tune the television and can be used to update the channel list. Note: It is recommended that Auto Tuning is run periodically to ensure that all new services are added.
Press MENU and press ▲ or ▼ to select Setup and press ► to enter the submenu. Main Menu Picture Sound Setup Applications Preferences : Select There are three TV modes: ATV, DVB-T and DVB-C that can be tuned-in manually using Manual Tuning. ATV mode Press MENU and press ▲ or ▼ to select Setup and press ► to enter the submenu. >> Press ▲ or ▼ to select Manual Tuning and press ► to enter the submenu.
English DVB-T mode DVB-C mode Press MENU and press ▲ or ▼ to select Setup and press ► to enter the submenu. Press MENU and press ▲ or ▼ to select Setup and press ► to enter the submenu. Press ▲ or ▼ to select Manual Tuning and press ► to enter the submenu. Press ▲ or ▼ to select Manual Tuning and press ► to enter the submenu.
Erase the channels from the channel list. Note: You can re-obtain the erased channels using Auto Tuning or Manual Tuning. The Channel Allocation menu helps you manage the channels such as Sort, Erase Channel, Lock, Skip, and Channel Label. In the Setup menu, press ▲ or ▼ to select Channel Allocation and press ► to enter the submenu.
English Skip Press ▲ or ▼ to select Channel Label and press ► to enter the submenu. To prevent certain channels from being viewed, the channel position can be skipped. Channel Label Channel Number Channel Label Label Clear The remote control must be removed as the channels will still be available using the number buttons. Channels can then be watched as normal using the controls on the television, but the television will not show the skipped channel position.
Automatic Power Down This function enables you to watch some pay services (encrypted services). When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Common Interface functions may not be possible depending upon the country broadcasting circumstances. The TV will automatically turn itself off (standby) after approximately 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel.
English General Controls The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment. Selecting Channels Subtitles To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P . If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off.
Volume Controls and Mute Sound Volume Press or Note: Press the AD button on the remote control to switch the Audio Description On or Off. • Hard of Hearing: This function provides narration to deaf and hard of hearing viewers. • Visually Impaired: This function provides descriptive narration of key visual elements, making television programmes, feature films, home video and other visual media accessible to people who are visually impaired or blind. to adjust the volume.
English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Wide 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
English Available Picture Size and Position Control Wide 4:3 Native Cinema 14:9 Auto ATV o o x o o o DTV o o x o o o AV1 (SCART) o o x o o o AV2 (CVBS) o o x o o x HDMI o o o o o o DVI o x o x x x 29
English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. Note: Features not available will be greyed out. Picture Setting Adjusting the Backlight can improve the clarity of the screen when viewing. Press MENU and press ▲ or ▼ to select Picture and press ► to enter the submenu. Main Menu Picture Sound Setup Applications Preferences : Select Press ▲ or ▼ to select Backlight.
Automatic format (Widescreen) When Blue Screen is selected, the screen will turn blue and the sound will be muted when no signal is received. When this television receives a true Widescreen picture and Picture Size is Auto, it will automatically be displayed in Widescreen format, irrespective of the television’s previous setting. In the Picture menu, press ▲ or ▼ to select Blue Screen. Picture Still Press ◄ or ► to select On or Off.
English Enjoy Photos through USB Port The Photo Viewer allows you to playback JPEG files from a USB storage device. Photo Viewer specifications You can also access the Media Player menu by pressing MENU. Press ▲ or ▼ to select Applications. Data type: JPEG Exif ver2.2 File format: DCF ver1.
To Set Interval time and Repeat Settings for Slideshow Photo Press MENU to open the Features. /USB/Photo 1/3 Pic−1.jpg OK : Play Features Sort Interval Time Repeat Date: 2010−01−01 9:43:06 788x1157 MENU : Features CH : Page RETURN : Back Volume 25 • To swtich between Slide Show and Single Show, press . • To view the previous or next photo, press ◄ or ►. • To rotate the photo, press ▲ or ▼. Note: This function is only available in Single Show mode.
English Enjoy Music through USB Port The MP3 Player allows you to playback MP3 files from a USB storage device. Music Player specifications Press ▲ or ▼ to select Media Player.
English Use the Features Menu Press MENU to open the Features menu when playing a song. Features Sound Repeat Sleep Timer Speaker : Select >> Off Off TV Speakers OK : Enter Press ▲ or ▼ to select Sound and press ◄ or ► to adjust Bass, Treble or Balance. Press ▲ or ▼ to select Repeat and press ◄ or ► to select On or Off. Press ▲ or ▼ to select Sleep Timer and press ◄ or ► to select Off or the number of minutes (10/20/30/40/50/60/90/120) you want the music to play before turning off.
English REGZA-LINK Controls This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA-LINK compatible equipment from the television’s remote control. Note: Not all Toshiba products currently support REGZA-LINK. Equipment Control The REGZA-LINK icon appears automatically after detected with REGZALINK compatible equipment. Press ▼ to highlight the input source shown with the REGZA-LINK icon.
English The following features are dependent on the connected equipment. For operating information, refer to the operation manual for all connected equipment. Pass-Through Control The Pass-Through feature allows you to control the connected REGZA-LINK device by the television’s remote control. Press ▲ or ▼ to select REGZA-LINK in the Quick Access Menu, and then press . The control panel will appear.
English REGZA-LINK Menus By activating the Enable REGZA-LINK feature in the REGZA-LINK setup menu, individual REGZALINK features can then be activated. One Touch Play Enable REGZA-LINK The function of REGZA-LINK will automatically power on the television that was in standby mode and switch the television’s input source to the port connected with the audio/video equipment by powering-on or playing from the audio/video equipment.
English TV Auto Power On The TV Auto Power On setting allows the television to be automatically switched On or Off if a REGZA-LINK device is turned On or Off. In the REGZA-LINK Setup menu, press ▲ or ▼ to select TV Auto Power On. Press ◄ or ► to select On or Off. Device Auto Standby When the Device Auto Standby is enabled, switching off the television will automatically switch off all connected REGZA-LINK equipment. In the REGZA-LINK Setup menu, press ▲ or ▼ to select Device Auto Standby.
English Preference Controls Subtitle Type Audio Languages You can choose the Subtitle Type from Normal or Hard of Hearing. If the Hard of Hearing is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions This feature allows a programme or film to be viewed with a choice of soundtrack language, provided they are currently being broadcast. In the Preferences menu, press ▲ or ▼ to select Subtitle and Audio, and then press ► or .
Press ▲ or ▼ to select the desired channel and press to enter the Event Timer menu. The television can be set to turn itself Off after a certain length of time. Event Timer Press QUICK to display the Quick Access menu.
English Parental Lock Change Password This function blocks channels or programmes that you do not want to or that you do not want your children to watch. Change the 4-digit parental control password. The default password is 0000. In the Setup menu, press ▲ or ▼ to select Password Setup, and then press ► or . A password is required to access this function. The factory default password is “0000”.
This television has a multi-page text memory, which takes a few moments to load. Control Buttons Setting the Language Below is a guide to the functions of the remote control text buttons. Displays the index/initial page: Press to access the index/initial page. The page displayed is dependant on the broadcaster. Reveals concealed text: To discover the solutions on quiz and joke pages press the button. Holds a wanted page: At times it is convenient to hold a page of text.
English Frequently Asked Questions Q A Q A Select the Manual Tuning in the Setup menu. Press ▲ or ▼ to select Fine and then press ◄ or ► to adjust to get the best picture and sound. Why is there no sound or picture? Check that the television is on and that all connections are made properly. Manual Tuning Search Fine Colour System Sound System There is a picture, but why is there little or no colour? When using an external source, if there is little or no colour, improvements may sometimes be achieved.
Broadcast Systems/Channels Display PAL-I UHF UK21-UK69 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B-Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input PAL, SECAM, NTSC 3.58 Sound Output (At 10% Distortion) EXT1 Input/Output 21-pin SCART 1 A/V, RGB EXT2 Input RCA Jacks Video Audio L + R HDMI 1/2 Input HDMI® HDMI 1 Audio 3.5 Mini Jack Stereo Visible Screen Size (approx.) Audio L + R 32 80cm 40 102cm 45 145W 145W 235W Standby (approx.) Model 32 < 0.
English License Information used with Toshiba Televisions The software pre-installed in the TOSHIBA Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBA or a third party. The TOSHIBA Digital Televisions use software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFORIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE HTTP//WWW.MPEGLA.
English Appendix A – Mpeg Audio Header part: scalfact.c Scalefactors for layer I and II This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the Licensef, or (at your option) any later version. This program is distributed in the hope that it will be usefulf, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF writer has been simplified to produce “uncompressed GIFs”. This technique does not use the LZW algorithm; the resulting GIF files are larger than usual, but are readable by all standard GIF decoders. “The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated.
English Appendix D – Zlib Header part: Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1.
The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product.
