Introduction 2 DIGITAL VIDEO Connections COMBINATION COLOR TELEVISION AND DVD VIDEO PLAYER Basic setup TV operation Basic playback MD13P1 Advanced playback OWNER’S MANUAL Function setup Others ©2004 Toshiba Corporation Before operating the unit, please read this manual thoroughly.
Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFEGUARDS Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS (Continued) 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14.
Introduction 27. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 28. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 29.
Introduction Precautions Notes on handling 3 When shipping the unit, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. 3 Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products to contact the unit for prolonged period. They will leave marks on the finish. 3 The top and rear panels of the unit may become warm after a long period of use.
Notes on discs Structure of disc contents Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. Introduction On handling discs DVD video disc DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on discs (Continued) About this owner’s manual This owner’s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to instruction notes of discs. Playable discs This unit can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx.
Contents Advanced playback IMPORTANT SAFEGUARDS ............................ 2 Precautions ....................................................... 6 Notes on discs ................................................... 7 Contents ............................................................ 9 Identification of controls .................................. 10 Starting setup .................................................. 18 Setting the language ....................................... 19 Zooming .............
Introduction Identification of controls See the page in for details.
The instructions in this manual describe the function on the remote control. See the page in for details.
Introduction Inserting batteries the battery compartment 1 Slide 2 cover in the direction of the arrow. Install two “AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cover. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters. Approx.
Connections Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 14 for Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Connections Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Connecting to optional equipment INPUT SELECT GAME You can enjoy VCR, camcorder or TV game with connection to external input. To select the external input, press INPUT SELECT and select “LINE” mode. Connections To connect the TV/DVD to a VCR Press the INPUT SELECT to select the “LINE” (external input) to use the TV as a monitor. Operate your VCR as usual.
Connections Connecting to optional equipment (Continued) You can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home.
Connecting to an amplifier equipped with a MPEG audio decoder Connections MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Basic setup POWER Starting setup The STARTING SETUP function makes installing your TV/DVD easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! CANCEL / ENTER Starting setup 1 Press POWER. The starting setup function begins and the Language setup menu appears on the screen. or to select your desired Press language, then press ENTER.
POWER Setting the language This TV/DVD can display the on screen language in English, Spanish or French. Select the language you prefer first, then proceed with the other menu options. MENU / / / ENTER Setting the language Press MENU, then press option. or to select Basic setup 1 SETUP/MENU LANGUAGE/IDIOMA/LANGUE VOL – VOL + ENGLISH ESPAÑOL FRANCAIS /MENU 2 Press or to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER.
TV operation POWER 0–9 TV operation VOL +/– TV operation 1 2 POWER Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. VOL – VOL + VOLUME 3 4 To turn on the TV/DVD, press POWER. The Power indicator will light. 32 Set the TV/CABLE selection to the appropriate position. (See page 23.
RECALL GAME SLEEP MUTE CH RTN CH +/– VOL +/– CH + CH – ■ SLEEP To set the TV/DVD to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds.
TV operation Closed captions WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. CLOSED CAPTION Closed captions Captions: This closed caption mode will display text on the screen in English or another language (depending on the setting of the closed captions CH 1/2).
To memorize channels 0–9 This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/ DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position.
TV operation Setting the V-Chip 0–9 An age limitation can be set to forbid children to watch programs according to “TV RATING” and “MOVIE RATING” level set. To use the V-Chip function, you must register a password. MENU CANCEL / / / Notes: • If you forget the password, you cannot set the V-Chip. • To avoid forgetting the password, write it down and keep in the safe place. To register password 1 Press MENU, then press option.
RECALL MENU / / / ENTER To set the V-Chip 1 In the V-CHIP menu, press or “V-CHIP SET”, then press . to select 4 or to select desired rating. Press After setting, press ENTER.
TV operation Picture control adjustment / Adjusting the picture preference MENU CANCEL / / / ENTER Picture controls are factory preset but you can adjust them individually as follows: And also you can select four picture modes—Standard, Sports, Movie, and Memory—as described in the following table: Picture control adjustment Adjusting the picture preference 1 1 Press MENU, then press option. or to select SETUP/MENU VOL – 2 Press .
Stereo and Second Audio Program (SAP) The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. DVD VCD CD 1 3,5 5 6 4 Basic playback Preparations: • Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time, you need to set “Starting setup” (see page 18). • When connecting to other equipment, turn power off.
To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Basic playback Playing a disc (continued) REV PLAY FWD SKIP / PAUSE / SLOW DVD VCD CD Playing in fast reverse or fast forward directions Press REV or FWD during playback. FWD REV REV: Fast reverse playback FWD: Fast forward playback Each time you press REW or FWD button, the playback speed changes. DVD VCD To resume normal playback Press PLAY. PLAY Notes: • The TV/DVD mutes sound and subtitles during reverse and forward scan of DVD video discs.
Advanced playback RECALL Zooming/Locating desired scene 0–9 CANCEL ZOOM / / / ENTER JUMP DVD VCD Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. 1 Press ZOOM during playback. ZOOM/CH RTN The centre part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). 1 2 Press frame.
Advanced playback Repeat playback/A-B Repeat playback / /▼ ENTER PLAY PLAY MODE REPEAT A-B DVD VCD CD 1 DVD VCD CD Repeat playback Press PLAY MODE during playback or stop mode. 2 A-B repeat playback allows you to repeat material between two selected points. 1 PLAY MODE A-B Repeat playback Press REPEAT A-B during playback. The start point is selected. REPEAT A-B A [DVD] A or ENTER once or twice to select Press B/A “Chapter” or “Title”.
Program playback/Random playback 0–9 You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD, Video CD and JPEG CD. CANCEL ▲/▼/ / ENTER PLAY MODE SKIP7 PLAY Program playback VCD CD 1 4 Press PLAY MODE in the stop mode. PLAY MODE Play Mode : Off Repeat : Off The programs you selected will start to playback in the order.
Advanced playback Changing angles/Title selection/DVD menu TOP MENU ANGLE DVD MENU ▲/▼/ / ENTER PLAY Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE during playback. The current angle will appear. ANGLE 2 Press ANGLE repeatedly until the desired angle is selected. ANGLE 1/9 Note: Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.
Changing soundtrack language/ Subtitles DVD VCD Changing soundtrack language You can select the language when you play a multilingual disc. 1 AUDIO SUBTITLE When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. Press AUDIO during playback. AUDIO Subtitles The current soundtrack language will appear. 1 Press SUBTITLE repeatedly during playback until your desired language appears.
Advanced playback RECALL 1 Karaoke playback/Disc status/ To turn off the PBC AUDIO / ENTER Karaoke playback You can turn the vocal on or off recorded on the DVD KARAOKE. 1 During DVD KARAOKE disc playback, press AUDIO. The KARAOKE symbol ( ) appears. DVD VCD CD Disc status With each press of RECALL, the status of the disc will appear on the screen and change as follows.
JPEG playback 0–9 You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen. ANGLE TOP MENU DVD MENU ▲/▼/ / ENTER PLAY STOP SKIP / PAUSE CAUTION: Some JPEG CDs can not be played back depending on the recording conditions.
Function setup Customizing the function settings You can change the default settings to customize performance to your preference. SETUP ▲/▼/ / ENTER RETURN DVD VCD CD 1 Setting procedure Press SETUP during stop mode. SETUP/MENU The following on-screen display appears. 3 Press C or D to select the desired option. CH + CH – Language Picture Sound Parental Other 4 Change the selection using C/D/B/A or ENTER, by referring to the corresponding pages 39 and 40.
Setting details Language Language Picture Sound Parental Other Menu Subtitle Audio English Automatic English Picture Language Picture Sound Parental Other Tv Screen Display JPEG Interval English Francais Espanol Other English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” on page 42). Original: (Audio) The unit will select the first priority language of each disc. Off: (Subtitle) Subtitles do not appear.
Function setup Customizing the Function Settings (continued) Setting details Sound Language Picture Sound Parental Other DRC On On Off /Enter/Setup/Return DRC DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment. On: Loud sound such as explosion or similar is toned down slightly when played back. This makes it suitable for when it is connected to a stereo. Off: It plays back at the recording level on the disc.
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. 0–9 OPEN/CLOSE ▲/▼ ENTER RETURN PLAY 1 Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit (see page 28). 4 PLAY Enter the password with number buttons (0–9). Then press ENTER. 1 2 3 4 5 6 7 8 9 If you interrupt the entering, press RETURN.
Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see pages 39).
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Others Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 5 Poor sound or No sound.
SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 28 7 8 No picture. • TV/DVD selector is not set correctly. 28 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Advanced playback mode. • Select the correct Audio Output position on AV amplifier. – 30 15 Picture is distorted during fast reverse/forward playback.
Others Specifications General AC 120 V 60 Hz Operation: 75 W, Stand by: 5 W Type 13 (335.4 mm diagonal) 1-1/2 x 2-11/16 inches (38 x 69 mm), 8 ohm x 2 1.5 W + 1.5 W 24.3 lbs (11.0 kg) Width: 14-1/4 inches (362 mm) Height: 15-1/16 inches (382 mm) Depth: 14-3/8 inches (365 mm) 181 channel freq.
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION AND DVD/CD PLAYER Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee .
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION AND DVD/CD PLAYER How to Obtain Warranty Service If after following all of the operating instructions in this manual and checking the section “Problems and troubleshooting” and you still find that service is needed; ( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find the nearest Toshiba Authorized Service Station. ( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.