Introduction 2 DIGITAL VIDEO Connections COMBINATION COLOR TELEVISION AND DVD VIDEO PLAYER Basic setup TV operation Basic playback MD13Q11 Advanced playback OWNER’S MANUAL Function setup Others ©2005 Toshiba Corporation Before operating the unit, please read this manual thoroughly.
Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS (Continued) 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. 15.
Introduction 28. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 29.
Introduction Precautions Notes on handling 3 When shipping the unit, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. 3 Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products to contact the unit for prolonged period. They will leave marks on the finish. 3 The top and rear panels of the unit may become warm after a long period of use.
Notes on discs Structure of disc contents Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. Introduction On handling discs DVD video disc DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on discs (Continued) About this owner’s manual This owner’s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to instruction notes of discs. Playable discs This unit can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx.
Contents Advanced playback IMPORTANT SAFEGUARDS ............................ 2 Precautions ....................................................... 6 Notes on discs ................................................... 7 Contents ............................................................ 9 Identification of controls .................................. 10 Zooming ......................................................... 31 Locating desired scene .................................. 31 Marking desired scenes ..
Introduction Identification of controls See the page in for details.
Introduction Remote control The instructions in this manual describe the function on the remote control. See the page in & & #$%& &'( %) !%)%& # ! *+ , . %$ ! *+ ,- # ! !! - & !* ' !& & ' ! ! ! !# & " ! !$ #$%& # for details.
Introduction Identification of controls (Continued) Inserting batteries 1 Open the battery compartment cover in the direction of the arrow. 2 Install two “R03/AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cover. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters.
Connections Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 14 for Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Connections Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Connecting to optional equipment You can enjoy VCR, camcorder or TV game with connection to external input. To select the external input, press INPUT and select “LINE” mode. INPUT GAME Connections To connect the TV/DVD to a VCR Press the INPUT to select the “LINE” (external input) to use the TV as a monitor. Operate your VCR as usual.
Connections Connecting to optional equipment (Continued) You can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment. * This section uses the following reference mark.
Connecting to an amplifier equipped with an MPEG2 audio decoder Connections MPEG2 sound You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. Amplifier equipped with an MPEG2 audio decoder To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) • Use DVD video discs encoded via the Dolby Digital recording system.
Basic setup POWER Starting setup The STARTING SETUP function makes installing your TV/DVD easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! / ENTER CANCEL Starting setup 1 Press POWER. The starting setup function begins and the Language setup menu appears on the screen. Press or to select your desired language, then press ENTER. 4 Now the “AUTO CH MEMORY” starts.
Setting the language This TV/DVD can display the on screen language in English, Spanish or French. Select the language you prefer first, then proceed with the other menu options. ENTER / / / MENU Setting the language Press MENU, then press option. or to select Basic setup 1 LANGUAGE/IDIOMA/LANGUE ENGLISH ESPAÑOL FRANCAIS /MENU 2 Press or to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER.
TV operation POWER 0–9 TV operation VOL +/– TV operation 1 2 4 To turn on the TV/DVD, press POWER. The Power indicator will light. Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. Press Direct channel selection buttons (0–9) to select the channel.
SLEEP DISPLAY VOL +/– MUTE CH / CH RTN GAME ■ DISPLAY Press DISPLAY to display the current informations on the screen. Press DISPLAY again to clear the display. • Channel number or external input mode • Stereo or SAP (Second Audio Program) audio status • Audio output status STEREO SAP CH 012 SEL. STEREO ■ CH RETURN This button allows you to go back to the last channel selected by pressing CH RTN. Press CH RTN again to return to the last channel you were watching.
TV operation Closed captions WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. CLOSED CAPTION Closed captions Captions: This closed caption mode will display text on the screen in English or another language (depending on the setting of the closed captions CH 1/2).
To memorize channels 0–9 This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/ DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position.
TV operation Setting the V-Chip 0–9 An age limitation can be set to forbid children to watch programs according to “TV RATING” and “MOVIE RATING” level set. To use the V-Chip function, you must register a password. ENTER / / / CANCEL MENU Notes: • If you forget the password, you cannot set the V-Chip. • To avoid forgetting the password, write it down and keep in the safe place. To register password 1 Press MENU, then press option.
DISPLAY ENTER / / / MENU To set the V-Chip 1 In the V-CHIP menu, press or “V-CHIP SET”, then press . to select / / MENU / OFF G PG PG-13 R / OFF : TV-Y : TV-Y7 : TV-G : TV-PG : TV-14 : TV-MA: / / TV-Y OFF / ENTER/MENU or / ENTER/MENU 5 Press : : : : : or to select “V-CHIP”. / 6 / / OFF / MENU Press or to display “ON”. Now your settings were set into the memory. V-CHIP V-CHIP SET CHANGE PASSWORD ON to select “MOVIE RATING”.
TV operation Picture control adjustment/ Adjusting the picture preference ENTER Picture controls are factory preset but you can adjust them individually as follows: And also you can select four picture modes—Standard, Sports, Movie, and Memory—as described in the following table: / / / CANCEL MENU Picture control adjustment Adjusting the picture preference 1 1 Press MENU, then press option. or to select Press MENU, then press option. Press .
Stereo and Second Audio Program (SAP) The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. DVD VCD CD 1 3,5 5 6 4 Basic playback Preparations: • Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time, you need to set “Starting setup” 18 . • When connecting to other equipment, turn power off.
To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Basic playback Playing a disc (continued) PAUSE PLAY FF SKIP SLOW REV DVD VCD CD / Playing in fast reverse or fast forward directions To resume normal playback Press PLAY. Press REV or FF during playback. REV: Fast reverse playback FF: Fast forward playback Each time you press REV or FF, the playback speed changes. DVD VCD / PLAY Notes: • The TV/DVD mutes sound and subtitles during reverse and forward scan of DVD/VCD video discs.
Advanced playback DISPLAY Zooming/Locating desired scene 0–9 JUMP ZOOM / / / CANCEL ENTER DVD VCD DVD VCD CD Zooming Locating desired scene This unit will allow you to zoom in on the frame image. You Use the title, chapter and time recorded on the disc to locate can then make selections by switching the position of the the desired point to play back. To check the title, chapter and time, press DISPLAY. frame. 1 Press ZOOM during playback. The center part of the image will be zoomed in.
Advanced playback Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. C/D ENTER CANCEL MARKER DVD VCD 1 Marking the scenes Press MARKER during playback. DVD VCD 1 Returning to the scenes Press MARKER during playback or stop mode. 2 Select the blank Marker using C or D. Then press ENTER at the desired scene.
Repeat playback/A-B Repeat playback PLAY MODE / /▼ PLAY REPEAT A-B DVD VCD CD 1 2 DVD VCD CD Repeat playback Press PLAY MODE during playback or stop mode. A-B Repeat playback A-B repeat playback allows you to repeat material between two selected points. 1 Press REPEAT A-B during playback. The start point is selected. A [DVD] A to select “Chapter” or “Title”. Press B/A The unit automatically starts repeat playback after finishing the current title or chapter.
Advanced playback Program playback/Random playback 0–9 You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD and Video CD. PLAY MODE ▲/▼/ / CANCEL PLAY ENTER VCD CD 1 2 Program playback !! Clear "#$ " " $ " $ 1 9 2 3 3 11 • To program others, repeat step 3.
Changing angles/Title selection/DVD menu ENTER DVD MENU ▲/▼/ / PLAY ANGLE TOP MENU Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE during playback. The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. 1/9 Note: Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.
Advanced playback Changing soundtrack language/ Subtitles DVD VCD Changing soundtrack language You can select the language when you play a multilingual disc. 1 SUBTITLE AUDIO SELECT Press AUDIO SELECT during playback. The current soundtrack language will appear. Subtitles When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. 1 Press SUBTITLE repeatedly during playback until your desired language appears.
1 Disc status/To turn off the PBC DISPLAY ENTER DVD VCD CD Disc status VCD With each press of DISPLAY, the status of the disc will appear on the screen and change as follows. To turn off the PBC Press number button 1 in the stop mode, then press ENTER. DVD 00:34:56 01:12:33 00:34:56 01:12:33 1/99 Chapter 1/999 1/9 1/8 Eng Dolby Digital 1/32 Eng Title Advanced playback To make status display disappear, press DISPLAY again.
Function setup Customizing the function settings You can change the default settings to customize performance to your preference. ENTER C/D/B/A SETUP RETURN DVD VCD CD 1 Setting procedure Press SETUP during stop mode. The following on-screen display appears. 5 To make SETUP screen disappear, press SETUP or RETURN. /Enter/Setup/Return 2 Press B or A to select the desired section, then press D or ENTER. 3 Press C or D to select the desired option.
Setting details Section Page Option Details Menu Subtitle Audio To select the language of “Menu”, “Subtitle” and “Audio” if their languages are recorded onto the disc more than one language. OSD To select a preferred language for on screen display. Tv Screen To select a picture size according to the aspect ratio of your TV. 40 Display To turn on or de-activate the operational status display on the screen. 40 Picture Mode To select a preferred picture mode from “Video”, “Film” or “Auto”.
Function setup Customizing the function settings (continued) Setting details Menu English Subtitle English Audio English OSD English /Setup/Return Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” on page 44).
Picture Mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Auto: Select this position normally. The DVD player automatically detects source content, film or video, of playback source, and converts that signal in the progressive output format in an appropriate method.
Function setup Customizing the function settings (continued) Setting details To change the parental level Password Parental ---Off /0Ð9/Enter/Cancel/Setup/Return Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the level you require appears. • Level Off: The parental control setting does not function. • Level 8: All DVD software can be played back.
OPEN/CLOSE Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. 0–9 ▲/▼ ENTER PLAY RETURN 1 Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit 28 . 4 Enter the password with Number buttons (0–9). Then press ENTER. To exit from the entry, press RETURN.
Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” " .
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Others Troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 5 Poor sound or no sound.
SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 28 7 8 No picture. • TV/DVD selector is not set correctly. 28 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the special playback mode. • Select the correct Audio Output position on AV amplifier. – 30 – Picture is distorted during fast reverse/forward playback.
Others Specifications General AC 120 V 60 Hz Operation: 75 W, Stand by: 5 W 13 Inch* (335.4 mm diagonal) 1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 ohm x 2 1.5 W + 1.5 W 24.3 lbs (11.0 kg) Width: 14-1/4 inches (362 mm) Height: 15-1/16 inches (382 mm) Depth: 14-3/8 inches (365 mm) 181 channel freq.
Limited warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee. Limited Ninety (90) Day Warranty TACP warrants this product and its parts against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase.
Limited warranty (continued) How to Obtain Warranty Service If after following all of the operating instructions in this manual and checking the section “Troubleshooting” and you still find that service is needed; ( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find the nearest Toshiba Authorized Service Station. ( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.
Memo Others ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ......................................................................................................
Printed in Thailand J5R80201B 05/02 K 5R80201B [E] (P49-Back) 52 1/11/05, 4:41 PM
