Manual

tenna connections
If youare using anindoor or outdoor antenna,follow the instructions below that correspond to your antenna system.
If youare using a cable TV service (CABLE), see CableTV connections _.
Antenna Antenna
jack jack
75 ohm coaxial cable
(not supplied)
300-75 ohm matching
transformer (not supplied)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a
300 ohm twin-lead wire, the use of the 300-75
ohm matching transformer (not supplied) may be
necessary.
O
o
tB
o
®
Antenna
jack 300-75ohm matching
transformer (not supplied)
tUw_Fi3e0aO'_ VwHF_}30an_vhm
(not supplied) (notsupplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer (not supplied). Attach the transformer
to the combiner, then attach the combiner to the
antenna jack.
;J
®
I 5YS0101A indb 13
Antenna
jack
twin-lead wire
(not supplied)
-_" Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
÷