Manual

mg a also
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Illustration of MD14H63
1 3,5 5 6
®
Preparations:
Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. Ifthe AC cord plug is plugged in for the first time, you
need to set "Starting setup" _.
When connecting to other equipment, turn power off.
Press POWER on the unit or on the remote
control to turn on the unit.
The Power indicator will light.
Press OPEN/CLOSE or PLAY.
o__,_,o= PLAY The disc tray closes
automatically.
On the TV-screen, ,,Am,,
changes to "Reading" and
then playback
commences.
,, Every time you press POWER, the unit starts from
TV mode.
When using an amplifier, switch on the amplifier.
POWER
\m/
-- O-- Illustration of MD14H63
Press TV/DVD to select DVD mode.The DVD startup screen will appear on the screen.
"Reading" display will change to "No Disc". (If DVD
disc has already loaded, playback will start
automatically.)
Reading
OR
A menu screen will appear on the TV screen, if the
disc has a menu feature.
Press _,/'v or -,I/_ to select title, then press ENTER.
Title is selected and play commences.
Press OPEN/CLOSE.
......_ The disc tray opens.
L Place a disc on the disc tray.
With the playback
side facing down.
There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the unit
to malfunction.
Do not place a disc which is unplayable on the disc tray.
Press STOP to end playback.
sT2_ m Resuming facility
The unit records the stopped point,
depending on the disc. "_" appears
on the screen. Press PLAY to resume
playback (from the scene point).
If you press STOP again ("m"
appears on the screen.), the unit will
clear the stopped point.
[] To start playback in the stop mode
Press PLAY.
PI.A¥
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation.
Disconnect the AC power cord, then connect it again.
5YS0101A indb 35
÷
w
6")
pa
ca
12'15 _006 12:21 _!9 PM I
®