Manual

®
[3aN3o@
[3a[_[3tal [3[m
[3e1_[_'t[]2][_[3 [311
AT[E_F_E_e_ _[3el_etu[3@ etu@
[] Parental control setting
Some discs are specified as not suitable for children•
Such discs can be limited not to playback with the unit.
1) Press A or T to select "Parental", then press 4 or
until the parental level you require to appear.
• Level Off: The parental control setting does not
function•
• Level 8: All DVD software can be played back.
. Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8.The limitation will be
more severe as the level number is lower.
2) Press ,_ or T to select "Password".
Press Number buttons (0-9) to input a 4-digit
password• Be sure to remember this number!
If you input a wrong number, press CANCEL.
3) Press ENTER to store the password.
4) Press OPEN/CLOSE to activate Parental control
setting. (See "Temporary cancel the rating level by
DVD disc" [__}.)
Notes:
The parental control level is equivalent to the following
USA movie ratings.
Level 1: G Level 5:
Level 2: Level 6: R
Level 3: PG Level 7:NC-17
Level 4:PG-13 Level 8:
The parental control levels for other countries/area
than U.S. are included for future use. Check the
appropriate parental control level when you buy a DVD
video disc equipped with the parental control feature in
the future.
Depending on the discs, the unit cannot limit playback.
Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
The password is required every time when you change
the parental level.
[] To change the parental level
1) Press A or T to select "Password"•
2) Press Number buttons (0-9) to enter the password
you have stored•
3) Press ENTER.
* The rating is now unlocked.
4) Press A or _' to select "Parental", then press ,,I or
to change the parental level.
5) Press _ or T to select "Password", then press
Number buttons (0-9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER•
Now the parental level is changed and locked•
[] If you forget the password.
• Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
"No Disc" appears on the screen.
4. Press and hold STOP on the front panel, and at
the same time press 7 on the remote control until
"PASSWORD CLEAR" appears on the screen.
5. Enter a new password again.
[] Select Files
You can select the file types to be displayed on the file
menu.
All:
Displays all files.
Music Only:
Displays files except JPEG file•
Pictures Only:
Displays only JPEG files.
Note:
If each setup D ~ _ has completed, the unit can
always work under the same condition (especially
with DVD discs).
Each setup will be retained in the memory even if
you turn the power off.
"13
O
I 5YS0101A p47352indd 51
÷
51
12,'18'2006 1:31:5i Pi_I I