Manual

@tenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If
you are using a cable TV service (CABLE), see page [_> for CableTV connections.
Antenna Antenna
jack jack
75 ohm coaxial cable
(not supplied)
300-75 ohm matching
transformer (supplied)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twinqead wire, the use of the 300-75 ohm
matching transformer may be necessary.
O
O
¢#
&
O
÷
Antenna
jack 300-75 ohm matching
transformer (supplied)
ie
UHF 300 ohm _ VHF 300 ohm
twin-lead wire _ twin-lead wire
(not supplied) (notsupplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twinqead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
÷
Antenna
jack
(notSiupplied)_
twin-lead wire
(not supplied)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
13
5W40101A [El (P13-23) 13 _ 2/15/06, 4:55 PM