Manual

o
rting setup
The STARTING SETUP function makes installing your TV/DVD easily. It leads
you the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
:: :: ::: _ POWER
_:::b iii
:2:::2:: ::::
,=Iv
ENTER
CANCEL
:::::::::::::::::::::
÷
rl Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press • or • to select your desired
language, then press ENTER.
POWER
©
Press • er • to select "TV" or "CABLE", then
press ENTER.
Press • or • to select "START", then pressENTER.
If you select "CANCEL" and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
Now the "AUTO CH MEMORY" starts.
After the starting setup is completed, the TV
channel appears on the screen.
Note:
If you press CANCEL in the process of "AUTO CH
MEMORY", you can do starting set up function again.
Note:
The starting setup function will work only when you press
POWER for the first time.
÷
18 _ 2/15/06, 4:55 PM