Printer Accessories User Manual

4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 119
[P] Saddle unit opening/closing switch (SW5)
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 2 screws, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-338
(3) Remove 2 screws, and then take off the sad-
dle unit opening/closing switch.
Fig. 4-339
Sensor bracket
Saddle unit
opening/closing
switch