Datasheet
MK5002MAL - 5GB
MK1002GAH - 10GB
1.8 inch ATA embedded
Hard Disk Drive
www.toshiba-europe.com/storage
Information Sheet
Specifications are subject to change without notice.
SPECIFICATIONS & CHARACTERISTICS
The Benefits Include: Ramp Load Technology.
Shock Tolerance. Operating 200G.
Non-operating 1000G. 300,000 Hours MTTF. Low Power Consumption. ATA 5
Functional
Specifications MK 1002 GAH MK 5002 MAL
Data Storage Capacity:
Per Drive, Formatted 10.014 GB 5.007 GB
Number of Platters 2 1
Number of Heads 4 2
Bytes / Sector 512 512
Rotational Speed (rpm) 4,200 ±0.1% 4,200 ±0.1%
Data Transfer Rate: Ultra DMA Ultra DMA
mode 66.7 MB/sec mode 66.7 MB/sec
PIO mode 16.6 PIO mode 16.6
MB/sec MB/sec
Average Seek Time: msec msec
Track-to-Track 3 3
Average 15 15
Maximum 26 26
Average Latency 7.14 7.14
Interface:
Type ATA-2 / 3 / 4 / 5
ATA-2 / 3 / 4 / 5
Buffer memory (KB) 1024 1024
Nominal Power Requirements:
Voltage (V); Supply for Logic 3.3V ±5% 3.3V±5%
Supply for Motor 3.3V ±5% 3.3V ±5%
Sleep (Watts) 0.05 0.05
Standby (Watts) 0.23 0.23
Reading/Writing (Watts) 1.3 1.3
Seeking (Watts) 1.3 1.3
Physical & Environmental Specifications
Dimensions -mm:
Height 8 5
Width 54.0 ±0.2 54.0 ±0.2
Depth 78.5 ±0.3 78.5 ±0.3
Weight 60 g 50 g
Ambient Temperature °C:
Operating 5°~60° 5°~60°
Non-Operating -20°~65° -20°~65°
Vibration and Shock:
Operating
9.8 m/s
2
(1.0G) 9.8 m/s
2
(1.0G)
Vibration Vibration
1960 m/s
2
(200G) 1960 m/s
2
(200G)
Shock Shock
Non-Operating 49 m/s
2
(5.0G) 49 m/s
2
(5.0G)
Vibration Vibration
9800 m/s
2
(1000G) 9800 m/s
2
(1000G)
Shock Shock
Acoustic Noise 22 dBA (idle) 22 dBA (idle)
Reliability Characteristics
MTTF 300,000 hours 300,000 hours
PM None None
Error Rates:
Unrecoverable 1 in 10
13
bits 1 in 10
13
bits
Seek 1 in 10
6
bits 1 in 10
6
bits
Read Head Type GMR Head GMR Head