User Manual
EN-22
The oven will beep five times to alert the user that cooking time has ended. "End" will
display. The time of day will display by opening the door or pressing STOP/Cancel pad.
a. START/+30Sec. must be pressed to continue cooking if the door is opened during
cooking.
b. A single beep sounds to indicate that a pad is correctly pressed; if pad is not
correctly pressed, no beep sounds.
a. When cooking finished, if the turntable is not at the initial position, it will enter the
turntable reset function. At this time, the lamp, fan and turntable are working,
“ ” will dynamic display. After the turntable has reset, the oven stops cooking
and reminds cooking finished.
b. In waitng state, press number key “5” for 3 seconds, there will be a long “beep”
denoting turntable reset function is turnned off. To turn on the turntable reset
function, in waiting state press number key “5” for 3 seconds, there will be a long
“beep” denoting that turntable reset function is released.
OPERATION
• This function only works for one completed cooking. If pause or open
the oven door during cooking, the current cooking cannot enter the
turntable reset function.
• Under the reset state, opening the door or “ STOP/Cancel “ button is
pressed, the oven will go back to waiting state.
NOTE
INSTRUCTION FOR USE
20. COOKING END REMINDER FUNCTION
21. OTHER SPECICATIONS
22. TURNTABLE RESET FUNCTION