Full Product Manual

EN-25
This oven uses modern electronic control to adjust cooking parameters to meet your
needs better for cooking.
Before operating your new microwave oven make sure you read and understand this Use and
Care Guide completely. The Microwave Oven is for food preparation only. ALWAYS have food in
the Microwave Oven when it is on to absorb the microwave energy. Stay near the oven while it’s
in use and check cooking progress frequently so that there is no chance of overcooking food.
Follow these procedures:
Plug in the oven. Close the door. The oven display will show 0:00, Oven goes into standby mode.
1. CLOCK SETTING
Suppose you want to enter the correct time of day 12min 30sec.
a
Touch "Timer/Clock" twice. leftmost “00” ashing.
b
Enter the correct time of day by turning the " " to adjust
the hour gures, The input time should be within 1--12 (12-
hour). Set 12 minutes at this step.
c
Touch "Timer/Clock" again. the minute gures will ash.
d
Turn " " to adjust the minute gures. The input time
should be within 0--59. Set 30 seconds at this step.
e
Conrm with "Timer/Clock".
NOTE
Your Microwave Oven can be programmed with the door open except for
"Start/+30Sec" and Odor Removal. If you enter an incorrect clock time, simply
touch "Stop/Cancel" and re-enter the correct time of day. Electrical power
supply to your Microwave Oven should not be interrupted. If this occurs
during cooking, the program will be erased. The time of day will also be
erased.
In the process of setting the hour gures, if you do not turn rotary coding
switch, it will switch to the kitchen timer function and the clock setting will
be invalid.