User Manual

2 SETTING ITEMS (ADMIN)
136 Setting Network Functions
Setting the TCP/IP for auto-IP and DHCP server
1
Press [DYNAMIC] in the ADDRESS MODE option and press [OK].
You will be returned to the NETWORK menu.
2
Continue to another network setting if required, then press [APPLY NOW].
“NETWORK INITIALIZING” is displayed at the lower left of the screen and this equipment starts initializing the
network interface card to apply the changes. This message disappears after it is finished.
Setting the TCP/IP for DHCP server only
1
Press [NO AUTO IP] in the ADDRESS MODE option and press [OK].
You will be returned to the NETWORK menu.