User Manual

2.SETTING ITEMS (ADMIN)

Setting General Functions 97

2 SETTING ITEMS (ADMIN)

Setting the print calibration

Press the following buttons as required.

For the e-STUDIO4540C Series

Press [PRINT].

For the e-STUDIO6550C Series

Press either of the following buttons.

y [600dpi PRINT]

Press this button to calibrate for the 600 dpi print jobs.

y [1200dpi PRINT]

Press this button to calibrate for the 1200 dpi print jobs.

Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the

calibration setting.

y When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous

screen.

y When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the

touch panel.

Proceed to the next step.