Owner's manual
36
CONTROLS AND FEATURES
English
Manual Setup:
a
In the
PREFERENCES
menu, highlight
Network Setup
and press
Q
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
Q
.
c
Press
B
or
b
to highlight
IP Address Setup
, and
press
Q
.
d
Highlight
Auto Setup
, and then press
C
or
c
to select
Off
.
e
Press
B
or
b
to highlight
IP Address
.
f
Press
C
or
c
to highlight the field you want to change,
and then use the number buttons to input the IP
address. To save the setting, press
Q
.
NOTE:
IP address field numbers must be between 0
and 255. After each field number has been set, press
Q
to store the entire address. If the entire IP Address
is invalid, a warning message will appear after
Q
is
pressed.
g
Press
B
or
b
to highlight
Subnet Mask
, and edit in
the same way as IP Address.
NOTE:
If you manually set the IP address, you must not use the
same IP address for any other device. The IP address you use
should be a private address.
MAC Address
You can view the fixed MAC address for the TV and for the Dual
Band WLAN Adaptor, if one is installed.
a
From the
PREFERENCES
menu, highlight
Network
Setup
and press
Q
.
b
Press
B
or
b
to highlight
Advanced Network Setup
,
and press
Q
.
c
Press
B
or
b
to highlight
MAC Address
, and press
Q
.
Using the software keyboard
You can enter text by using the Software Keyboard.
The Software Keyboard window will appear when
you press
Q
on a field that accepts character input.
To enter text using the software keyboard:
a
Highlight the desired character on the on-screen
software keyboard.
b
Press
Q
.
c
Repeat steps 1 and 2 until you have entered all desired
text.
d
Press the
BLUE
button to close the software keyboard
and return to the previous screen.
NOTE:
If
RETURN
is pressed, changes are not saved
and the software keyboard window is closed. The text
will remain as it was before starting the keyboard.
Input operation on the remote control:
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address
133 . 177 . 108 . 157
255 . 255 . 255 . 0
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address
133 . 177 . 108 . 157
255 . 255 . 255 . 0
Button Description
Q
Inputs the selected character.
0-9 Inputs the number directly.
B
b
C
c
Moves the character highlight.
CC
cc
Moves the cursor.
Z
Moves the cursor to the head of a
character string.
z
Moves the cursor to the end of a
character string.
RED Deletes 1 character to the left of
the cursor.
GREEN Cycles through upper case, lower
case, numbers, and symbols, if
available.
YELLOW Chooses an accented version of
the current letter, if applicable.
BLUE Saves changes and closes the
Software Keyboard window.
RETURN Closes the Software Keyboard
window without saving changes.
A BC DE F G
A a1@
AAA|
HIJKLMN
OPQRSTU
VWX YZ
RVXVMV73_WebOM_UK.book Page 36 Monday, April 19, 2010 10:46 AM