Owner's manual
8
English
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:
- - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
. . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the video recorder
IN
/
OUT
socket to the television.
Connect the decoder
TV
socket to the television. Connect the
media recorder
SAT
socket to the decoder
MEDIA REC
. socket.
Before running
Auto Tuning
, put your decoder and media
recorder to
Standby
.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active.
HDMI
®
(High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-definition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE:
Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN
port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner
’s
manuals for
all
additional equipment must be
referred to for exact instructions.
We recommend
SCART 1
for a decoder and
SCART 2
for a
media recorder.
If connecting S-Video equipment, set
EXT 2
Input mode to
S-
VIDEO
. See
page 58
.
The VARIABLE AUDIO OUT sockets allow you to listen to your
TV's audio through your audio system.
The VARIABLE WOOFER OUT socket allows you to connect an
external Sub-Woofer.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o
to select between
DTV
,
EXT 1
,
EXT 2
,
EXT 3
,
EXT 4
,
HDMI 1
,
HDMI 2
,
HDMI 3
,
HDMI 4*
,
PC
or
ATV
.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
* RV/XV series only
COMPONENT VIDEO INPUT (EXT 3)
HDMI
®
INPUT
SOCKETS
SCART 2 (EXT 2)
FIXING STRAP
SCART 1 (EXT 1)
decoder*
media recorder
*a decoder could
be Digital Satellite or
any other compatible
decoder.
POWER switch
OPTICAL DIGITAL AUDIO OUTPUT
ILLUSTRATION SHOWS THE XV MODEL.
Antenna/Cable
LAN port
VARIABLE WOOFER OUT (XV/MV series only)
VARIABLE AUDIO OUT (XV/MV series only)
RV/XV series
only
RVXVMV73_WebOM_UK.book Page 8 Monday, April 19, 2010 10:46 AM