OWNER’S MANUAL LCD Color Monitor P1550LA P1750LA P1950LA Owner’s Record The model number and serial number are on the back of your monitor. Record these numbers in the spaces below Refer to these numbers whenever you communicate with your Toshiba dealer about this monitor. Model Number: Serial Number: C 2005 TOSHIBA CORPORATION ○ All Rights Reserved Part Number: V.1.
Important Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF. The exclamation point in the triangle tells you that important operating and maintenance instructions follow this symbol.
Important Information FCC compliance information in USA FCC Declaration of Conformity Compliance Statement (Part 15): The Toshiba LCD Color Monitor complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for compliance to these rules is: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Important Information 11. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 12. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
Table of Contents Important Information…………………………………………………………………… 2 Table of Contents……………………………………………………………………….. 5 Exploring your New Monitor……………………………………………………………. 6 Front Panel……………………………………………………………………….…. 6 Back…………………………………………………………………………………. 6 Side…………………………………………………………………………………. 6 Selecting a Location for the Monitor……………………………………………….……7 Connecting your Monitor………………………………………………………………… 7 Connecting a DVR (Digital Video Recorder)…………………………………………..
Exploring your New Monitor You can operate your Monitor by using the buttons on the front panel. The side panels provide the inputs to connect other equipment to your Monitor. Front Panel P1550LA P1750LA N TO N U AU M E OW D P1950LA T ER UP PU W IN PO Back Side Audio 2 IN Audio 2 Audio 1 IN Audio 1 OUT OUT S-Video SVideoIN Video OUT Video IN Video OUT Video IN 2 2 1 1 PC Audio IN VGAIN VGA AC IN Note: 45 15 Auto: Auto adjust the optimal display screen in PC mode.
Selecting a Location for the Monitor Place the Monitor on the floor or on a sturdy platform in a location where light does not directly hit the screen. Place the Monitor far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the Monitor. Caution: When using the back stand, please be careful since in some angles, the Monitor may fall over to the front.
Connecting a DVR (Digital Video Recorder) This connection allows you to watch DVR. Audio 2 IN Audio 2 OUT Audio 1 Audio 1 IN OUT S-Video IN S-Video DVR Aud io Out Video 2 OUT Video 2 IN Video 1 OUT Video 1 IN Monitor Out You will need: • Standard Audio cables • BNC video cables Connecting a camera This connection allows you to watch camera.
Connecting a PC (Personal Computer) Before you connect this PC to your monitor, change the adjustment of your PC’s Resolution and Refresh rate. See “Monitor Display modes”. Connect one end of a (male to male) VGA cable to the video port of the computer and the other end to the VGA connector at the back of the monitor. Fix the connectors firmly with the screws on the plug. Turn on the computer and Monitor. The monitor can be operated as the computer monitor.
Rack Mount Mounting the monitor on the rack Rack Mount Note: When adjusting to a rack, you will need to use an optional rack mount to the back side of the LCD monitor. Optional rack mount will be sold separately. Arm Mount (VESA standard) When adjusting the VESA Standard Arms to the back side of the LCD monitor, please use the M4x8(mm) screw. For further informations please refer to the Arm Manual.
Setting up your Monitor 1. Turning on the monitor Press the POWER. : The power indicator lamp (green) will light and the image will be displayed. Press the POWER again. : The power indicator lamp (red) will light and the power will be turned off. 2. Switching the input source Press the INPUT. : Each press will switch the source in order. 3.
General Setup TOSHIBA Language Bac k Light Power on Option Power Latching Key Loc k Display Volum e Exit OSD English 100 None ON OFF OFF 50 Language: Allow user to select the Languages in English, French and Spanish. Backlight: Allow user to adjust the panels backlight luminance. When pressing the up down button, the number displayed will not be in serial order. Power on Option: Setting the video input priority whenever power is turned ON. AV1: Set channel to AV1 when power is turned ON.
Video Setup TOSHIBA Brightness Contrast Color Hue Sharpness Color Tem p Video System Over Scan Default Exit OSD 100 100 100 0 100 9300 NTSC LARGE Brightness: Adjust the overall picture shade and brightness. Contrast: Provide adjustment for contrast between light and dark areas of the picture When pressing the up down button, the number displayed will not be in serial order. Color: Adjust the color gain on the screen.
PC-In Setup TOSHIBA Auto Brightness Contrast H – Position V – Position Clock Phase Color Temp White Balance Default Exit OSD Auto: OFF 100 100 100 100 100 100 9300 Auto-optimize displaying picture under PC mode. Brightness: Adjust the overall picture shade and brightness. Contrast: Adjusts the contrast between light or dark areas of the picture H-Position: Adjusts the horizontal position V-Position: Adjusts the vertical position Clock: use to adjust best picture quality.
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solution. Symptom Solution Monitor will not turn on No picture, no sound No sound, picture OK ● Make sure the power cord is plugged in, then press POWER button. ● Check cable connections. There is no sound in “Video Loss”. ● Check audio Cable Connections ● Try pressing Volume up button in the Menu. ● Check cable connections ● Adjust Video set up menu.
LCD Color Monitor Specifications Model Number P1550LA P1750LA P1950LA 15.0” 17.0” 19.
LCD Color Monitor Dimensions 17
LIMITED WARRANTY The Imaging Systems Division of Toshiba America Information Systems, Inc.(“ ISD) makes the following limited warranties with regard to this LCD Monitor(“ Product” ). These limited warranties extend to the original End-User (“ You[r]” ). One(1) Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a period of one(1)year from the date of purchase by the original End-User.