User’s Manual P300/P300D Series computers.toshiba-europe.
P300/P300D Series Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA P300/P300D Series Portable Personal Computer User's Manual First edition May 2008 Ownership and copyright of music, video, computer programs, databases, etc. are protected by the copyright laws.
P300/P300D Series AMD, the AMD Arrow logo, AMD Athlon, AMD Turion, Radeon, and combinations thereof, ATI Mobility Radeon are trademarks of Advanced Micro Devices, Inc. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated. Bluetooth™ is a registered trademark owned by its proprietor and used by TOSHIBA under license. ConfigFree is a trademark of TOSHIBA Corporation. DVD MovieFactory is a trademarks of Ulead Systems Inc.
P300/P300D Series ■ Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. ■ Use only the AC adapter and batteries that are approved for use with this computer. Use of another type of battery or AC adapter may risk fire or explosion.
P300/P300D Series Working environment This product was designed to fulfill the EMC (Electromagnetic Compatibility) requirements for "residential, commercial and light industry environments". The following environment is not approved: In the following environments the use of this product can be restricted: ■ Industrial Environments (e.g. environments where a mains voltage of 380V three-phase is being used).
P300/P300D Series Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.
P300/P300D Series batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recyclingprogrammes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. This symbol may not be displayed depending on the country and region where you purchased.
P300/P300D Series Optical disc drive safety instructions Be sure to check the international precautions at the end of this section. Hitach-LG Data Storage DVD Super Multi GSA-T50F/GSA-T50N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
P300/P300D Series Panasonic DVD Super Multi UJ870EB/UK870AB ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
P300/P300D Series Pioneer DVD Super Multi DVR-KD08TBF/DVR-KD08TBM ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
P300/P300D Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD Super Multi TS-L633P/TS-L633A ■ This DVD writable drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retainfor future reference. should the unit ever require maintenance, contact an authorized service location-see service procedure. ■ Use of controls or adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
P300/P300D Series International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure.
P300/P300D Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
P300/P300D Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
P300/P300D Series Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
P300/P300D Series Table of Contents Chapter 1 Introduction Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Utilities and Applications. . . . . . . . . . .
P300/P300D Series Chapter 4 Operating Basics Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the fingerprint sensor (FingerPrint sensor is provided with some models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 USB Sleep and Charge function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Using the Web Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Using the microphone . . . . . .
P300/P300D Series Chapter 8 Optional Devices ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 SD/SDHC/MMC/MEMORY STICK/ MEMORY STICK PRO/xD Memory cards . . . . . . . . . . . . . . . . . . . . . . 8-3 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Additional AC adaptor . . . . . . . . . . . . . . .
P300/P300D Series Preface Congratulations on your purchase of the P300/P300D Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells you how to set up and begin using your P300/P300D Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
P300/P300D Series Chapter 5, The Keyboard, describes special keyboard functions including hot keys. Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources and battery save modes. Chapter 7, HW Setup explains how to configure the computer using the HW Setup program. Chapter 8, Optional Devices, describes the optional hardware available.
P300/P300D Series ABC When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the type face you see to the left. Display ABC Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below.
Introduction Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer's features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction ■ TOSHIBA FingerPrint Utility * ■ TOSHIBA SD Memory Utilities ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition* ■ TOSHIBA Acoustic Silencer ■ Ulead MovieFactory® for TOSHIBA* ■ Presto! BizCard 5* ■ Online Manual Other software may be preinstalled dependant on the model purchased. * The availability of this software is dependent on the model you purchased.
Introduction Memory Slots PC2-5300 or PC2-6400 512 MB, 1024 MB, 2048 MB or 4096 MB memory modules can be installed in the two memory slots. Maximum system memory size and speed are depending on the model you purchased. Main Memory Disclaimer Part of the main system memory may be used by the graphics system for graphics performance and therefore reduce the amount of main system memory available for other computing activities.
Introduction Video RAM Depending on the model you purchased. Intel® GMA HD4500 model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. ATI Radeon™ HD 3200 Graphics model: ATI Radeon™ 3100 Graphics model: Video RAM capacity shares with main memory, and the proportion depends on ATI HyperMemory™. ATI Mobility Radeon™ HD 3470 model: External 64/128/256 MB. ATI Mobility Radeon™ HD 3650 model: External 256/512 MB.
Introduction Disks Hard disk Disclaimer 1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content.
Introduction DVD Super Multi drive Some models are equipped with a full-size DVD Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROM's at maximum 8 speed and CD-ROM's at maximum 24 speed. It writes CD-R's at up to 24 speed, CD-RW's at up to 16 speed, DVD-R's at maximum 8 speed, DVD-RW's at maximum 6 speed.
Introduction Graphics Controller Graphics controller maximizes display performance. Refer to Display Controller section in Appendix B, Display Controller for more information. Keyboard Built-In TOSHIBA Vista keyboard, 104 keys or 105 keys with numeric keypad, compatible with IBM enhanced keyboard, dedicated cursor control, and keys. Refer to Chapter 5, The Keyboard, for details.
Introduction Slots ExpressCard The ExpressCard expansion slot that can accommodate two standard module formats; an ExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small addin card technology based on the PCI Express and Universal Serial Bus (USB) interfaces. Multiple Digital Media Supports SD/SDHC memory card, MMC, Card Slot MEMORY STICK, MEMORY STICK PRO and xD Picture card. Multimedia Web Camera Record/Send still or video images with this integrated webcam.
Introduction Wireless LAN Where present, it supports the A,B,G and draft N standards but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11a/g) ■ Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbit/s. (IEEE 802.
Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program. Instant Security The hot key function Fn + F1 blanks the screen and disables the computer, providing data security.
Introduction Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk so that when you turn on the power again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started,for details. Sleep Mode If you have to interrupt your work, you can turn off the power without exiting from your software.
Introduction TOSHIBA Accessibility The TOSHIBA Accessibility utility provides support to movement impaired users when they need to use the TOSHIBA Hot-key functions. In use, the utility allows you to make the Fn key 'sticky', that is you can press it once, release it, and then press one of the "F" keys in order to access its specific function. When set, the Fn key will remain active until another key is pressed. TOSHIBA Button Support This utility controls the button operation of the computer.
Introduction TOSHIBA DVD-RAM Utility TOSHIBA DVD-RAM Utility has a Physical Format function and Write-Protect function to DVD-RAM. This utility is contained in the TOSHIBA Disc Creator setup module. To run TOSHIBA DVD-RAM Utility, click , select All Programs, TOSHIBA, CD&DVD Applications, and then click DVD-RAM Utility. CD/DVD Drive Acoustic Silencer This utility allows you to configure the read speed of the CD drive.
Introduction TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. To run ConfigFree, click , select All Programs, TOSHIBA, Networking and then click ConfigFree.
Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. Refer to Chapter 8 Optional Devices, for details. The following options are available: Memory expansion Two memory modules can be installed in this computer. Use only PC2-5300 or PC2-6400* compatible DDRII memory modules. See your TOSHIBA dealer for details. * The availability of DDRII depends on the model you purchased.
The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.
The Grand Tour Power LED The Power indicator glows blue when the computer is on. If you select Sleep Mode from Turn Off Computer, this indicator flashes orange (one second on, two seconds off) while the computer enters Sleep Mode. Battery LED The Battery indicator shows the condition of the battery's charge: Blue indicates a full charge, orange indicates that the battery is charging and flashing orange indicates a low battery charge. Refer to Chapter 6, Power and Power-Up Modes.
The Grand Tour Left side The following figure shows the computer's left side. External Monitor Port Cooling Vents eSATA/USB combo port TV Out Port Universal Serial Bus (USB 2.0) HDMI port LAN Jack Express Card Slot i.LINK (IEEE 1394a) Port The left side of the computer External Monitor Port This 15-pin port lets you connect an external video display. Cooling Vents Cooling vents help prevent the CPU from overheating. Do not block the cooling vents.
The Grand Tour LAN Jack This jack lets you connect to a LAN. The adaptor has built-in support for Fast Ethernet LAN or Giga bit Ethernet.(Depend on the model you purchased). Refer to Chapter 4, Operating Basics, for details. i.LINK (IEEE1394a) Port This port allows you to connect an external device, such as a digital video camera, for highspeed data transfer. (Provided with some models) Right side The following figure shows the computer's right side.
The Grand Tour FM Antenna Jack A jack enables the connection of FM antenna. (Depends on the model you purchased.) Emergency Eject Hole In the event that the disc drive becomes inexplicably locked or stops responding press this button to force a manual ejection of the ODD tray. DC IN 19V Jack The AC adaptor connects to this socket. Use only the model of AC adaptor that comes with the computer. Using the wrong adaptor can damage your computer.
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Cooling Vents Memory Module and Wireless LAN Cover Hard Disk Cover Battery Release Latch Battery Pack Lock Battery Pack The underside of the computer Cooling Vents Cooling vents help prevent the CPU from overheating. Memory Module and Wireless LAN Cover This cover protects two memory module sockets -one or two modules are pre-installed.
The Grand Tour Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, lift the front of the display. Position the display at a comfortable viewing angle.
The Grand Tour User’s Manual Built-in microphone The microphone is used with the Web Camera to talk to other Web Camera users and to record messages on windows media. Power Button Turns the computer on and off and puts it into Hibernation mode and wakes it up from Sleep mode. Mute Button Press this button to mute/un-mute sound. CD/DVD Button Pressing this button will launch an application program that allows for playing of CDs or DVDs.
The Grand Tour Optical Disc Drive An ATAPI interface controller is used for optical disc operation. When the computer is accessing an optical disc, an indicator on the drive glows. Region codes for DVD drive and media Optical disc drive and their associated media are manufactured according to the specifications of six marketing regions. When you purchase DVD-Video, make sure it matches your drive, otherwise it will not play properly.
The Grand Tour DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.
The Grand Tour The AC adaptor ■ Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor or other types of AC Adaptors may have a different voltage which could cause damage to your computer, computer failure and/or possible data loss.
The Grand Tour Remote controller (Provided with some models) A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location. You can use your remote controller with Media Center to play CDs, DVDs and videos, to view pictures. The remote controller helps you to control the playback of a movie through Media Center. Using the remote controller, you can: ■ Navigate and control all Media Center windows. ■ Control the video.
The Grand Tour User’s Manual Power Starts or terminate the operating system.This button functions like the power button of your computer. By default, the Sleep mode is equivalent to the power off state of your computer. To change the setting, click Start Control panel System and Maintenance Power Options Choose what the Power button does. The following four options are available: Do nothig, Sleep, Hibernate and Shut down. Volume + Increases the volume while viewing DVDs or replaying CDs.
The Grand Tour Replay Moves media backward (seven seconds for videos, one music track or one DVD chapter at a time). Stop Stops the media currently playing. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter). Using the remote controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location. ■ The remote controller is designed specifically for this computer.
The Grand Tour 30 Degrees 15 Degrees (Vertically) Infrared Receiver Window 30 Degrees 5M Remote Controller Operational range of the remote controller Even if within the effective scope as described above, the remote controller may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the remote controller. ■ When direct sunlight or strong fluorescent light strikes the infrared receiver window.
The Grand Tour Installing/Removing batteries Be sure to install the provided CR2016 type batteries before using the remote controller. The procedures for installing and removing the batteries vary depending on the type of the remote controller. Check the type and then install or remove the batteries as instructed. Store the battery for the remote controller beyond the reach of children. If a child swallows a battery, this might result in choking. If it happens, contact a doctor immediately.
The Grand Tour Type of battery that can be used for the remote controller When the provided batteries run down, please replace them with adequate ones. CR2016 type battery is available. Other types or battery should not be used. Installing the batteries 1. Open the battery cover on the back side of the remote controller. Battery Cover Opening the battery cover 2. Be sure to place the batteries with correct polarities.
The Grand Tour Slim size remote controller 1. Open the battery cover on the back side of the remote controller. 2. Hold down the stopper and slide the battery out of battery case. Stopper Battery Removing the batteries 3. Insert the battery in place. Be sure to place the batteries with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case. 4. Close the battery cover. Close the cover securely until it clicks.
Getting Started Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read the Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability.
Getting Started 4. Secure the Battery Pack Lock to ensure the battery is locked into place. Later, when you want to remove the battery you must disengage this lock first. Battery Pack Lock Battery Release Latch Securing the battery pack Refer to Removing the battery pack section in Chapter 6, Power and Power-Up Modes,for removing the battery pack. Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power.
Getting Started ■ Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. ■ When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in the User's Manual.
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Opening the display Turning on the power This section describes how to turn on the power.
Getting Started Turning on the power Windows Vista™ setup When you first turn on the power, the computer's initial screen is the Microsoft® Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Be sure to read the Windows End User License Agreement display carefully. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode.
Getting Started Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge. Sleep Mode If you have to interrupt your work, you can turn off the power without exiting from your software. Data is maintained in the computer's main memory. When you turn on the power again, you can continue working right where you left off. ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options.
Getting Started ■ Click , click power button located in the power management buttons , or click arrow button and select Sleep from the menu. ■ Close the display panel. This feature must be enabled. Please refer to the Power Options (to access it, click Control Panel System and Maintenance Power Options). When you turn the power back on, you can continue where you left when you shut down the computer. You can also enable Sleep Mode by pressing Fn + F3. Refer to Chapter 5, The Keyboard, for details.
Getting Started ■ You can use the panel power off feature. Starting Hibernation Mode You can also enable Hibernation Mode by pressing Fn + F4. Refer to Chapter 5, The Keyboard, for details. To enter Hibernation Mode, follow the steps below. 1. Click . 2. Click the arrow icon located in the power management button . 3. From the pull down menu, select Hibernate. Automatic Hibernation Mode The computer will enter Hibernation mode automatically when you press the power button or close the Display Screen.
Getting Started 3. Press the power button and hold it down for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning it on again with the power button. System Recovery Options and Restoring the pre-installed Software System Recovery Options About 1.5 GB hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem.
Getting Started Creating Optical Recovery Discs This section describes how to create Recovery Discs. ■ Be sure to connect the AC adaptor when you create Recovery Discs. ■ Be sure to close all other software programs except the Recovery Disc Creator. ■ Do not run software such as screen savers which can put a heavy load on the CPU. ■ Operate the computer at full power. ■ Do not use power-saving features. ■ Do not write to the disc when the virus check software is running.
Getting Started Restoring the pre-installed software from your created Recovery Discs If the pre-installed files are damaged, you are able to use the Recovery Discs you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps below: When the sound mute feature has been activated by pressing the Fn + ESC key, be sure to disable this to allow sounds to be heard before starting the restore process.
Getting Started Be sure to connect the AC adaptor, otherwise you may run out of battery during the recovery process. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Turn off the computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER. 4.
Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical media drives, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the TouchPad To use the TouchPad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad. The TouchPad could be damaged. For some functions, you can tap the TouchPad instead of pressing a control button. Click: Double-click: Drag and drop: Scroll: Tap the TouchPad once Tap the TouchPad twice 1. Hold down the left control button and move the cursor to drag the item you want to move. 2. Lift your finger to drop the item where you want it.
Operating Basics Slide the finger over the recognition sensor ■ Avoid swiping with the finger stiff or pressed-on too hard: Fingerprint reading may fail if the center of the fingerprint is not touching on the sensor, or when finger is swiped while pressing hard. Make sure that the center of the fingerprint is touching the sensor before swiping. ■ Confirm the center of the fingerprint whirl before swiping: The thumb’s fingerprint has a bigger whirl, which is prone to misalignment and distortions.
Operating Basics ■ Wash and dry your hands thoroughly. ■ Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially when the weather is dry. ■ Clean the sensor with a lint-free cloth. Do not use detergent to clean the sensor. ■ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate.
Operating Basics Fingerprint sensor limitations ■ The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint. ■ A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration. ■ The recognition success rate may differ from user to user. ■ Toshiba does not guarantee that this fingerprint recognition technology will be error-free.
Operating Basics 3. The Control Center screen is displayed. Click the non-enrolled finger icon above the finger. 4. The Fingerprint Enrollment screen is displayed. Confirm the message and click Next. 5. The Scanning Practice screen is displayed. You can practice swiping your finger. When you have finished practicing swiping your finger, click Next. 6. The Fingerprint Image Capture screen is displayed.
Operating Basics Fingerprint system boot authentication General The fingerprint authentication system can be used to replace the keyboard based User Password authentication system when booting up. If you do not want to use the fingerprint authentication system for password authentication when booting up, but prefer to use the keyboard-based system instead, press the BACK SPACE key when the Fingerprint System Boot Authentication screen is displayed.
Operating Basics Fingerprint Single Sign-On feature General This is a feature that allows the user to complete the authentication for both the User Password (and optionally, the HDD user and Supervisor passwords) and logging on to Windows using only one fingerprint authentication when booting up. It is necessary to register the User Password and Windows Logon password before using the fingerprint Pre-OS feature and this fingerprint Single Sign-On feature.
Operating Basics You can use the "USB Sleep and Charge function" to charge certain USBcompatible external devices such as mobile phones or portable digital music players. However, the "USB Sleep and Charge function" may not work with certain external devices even if they are compliant with the USB specification. In those cases, turn the power of the computer ON to charge the device. ■ The "USB Sleep and Charge function" only works for compatible ports. This function is disabled in the default setting.
Operating Basics Using the Web Camera This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. Please unstick the protective plastic-film before using the Web Camera.
Operating Basics Capture Still Images Click to see a preview of the captured image; you can also e-mail the image. Video Recording Click to prepare for recording. Click again to start recording. One more to stop recording and see preview of the video. Audio Recording Click to start recording, click again to stop and listen to a preview of the audio. Function Access additional functions: About, Player, Effects, Properties, Settings and Help. About Displays software manufacturer details.
Operating Basics Using the TOSHIBA Face Recognition If your computer is equipped with a web camera, the TOSHIBA Face Recognition feature can be used to verify the face of users when they log on to Windows. If the verification is successful, a user will be logged on to Windows automatically. The user can thus avoid having to enter a password, which makes the login process easier. ■ TOSHIBA Face Recognition does not guarantee the correct identification of a user.
Operating Basics How to register the Face Recognition Data Take a picture for facial verification purposes, and register the data needed when you log in. To register the data needed when you log in, follow the steps as described below: 1. To launch this utility, click Start All Programs TOSHIBA Utilities TOSHIBA Face Recognition. ■ The Registration screen is displayed for a logged-in user whose face has not been registered.
Operating Basics ■ Fill in the User Name, User Full name, Log on to, Password, and Confirm password fields; When you have finished it, click Next button. 12. The Management screen is displayed. The registered account name will be displayed. Clicking on it will cause the captured image of your face to be displayed on the left. How to Delete the Face Recognition Data Delete image data, account information, and personal record data created during registration.
Operating Basics 4. "Please turn your face to the camera" will be displayed. 5. Verification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another. ■ If an error occurs during authentication, you will be returned to the Select Tiles screen. 6. Windows Welcome screen will be displayed, and will be logged in automatically to Windows. 1:1 Mode Login screen 1. 2. 3. 4. 5. 6. Turn on the computer.
Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. Eject Button Pressing the eject button b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Place the disc, label side up, in the drawer.
Operating Basics When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above. ■ Do not touch the laser lens. Doing so could cause misalignment. ■ Keep foreign matter from entering the drive. Check the back edge of the tray to make sure it carries no debris before closing the drive. 4.
Operating Basics Removing discs To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer. Also, if the disc is spinning when you open the drawer, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics Writing CD/DVD with the DVD Super Multi drive Some models in this series are equipped with Writing CD/DVD with the DVD Super Multi drive. You can use the DVD Super Multi drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: TOSHIBA Disc Creator and TOSHIBA Direct Disc Writer. Ulead Movie factory for TOSHIBA.
Operating Basics DVD+RW: MITSUBISHI KAGAKU MEDIA CO, LTD. DVD-RAM: DVD Specifications for DVD-RAM Disc for Version2.0, 2.1 or 2.2 Hitachi Maxell Ltd. Matsushita Electric Industrial Co., Ltd. This drive cannot use discs that allow writing of 8 speeds or more (DVD-R, DVD+R, DVD+RW), or 6 speeds or more (DVD-RW) ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it.
Operating Basics ■ Do not run software such as a screen saver, which can put a heavy load on the CPU. ■ Operate the computer under the power scheme High Performance. Do not use power-saving features. ■ Do not write while virus check software is running. Wait for it to finish and then disable virus detection programs including any software that checks files automatically in the background. ■ Do not use hard disc utilities, including those intended to enhance HDD access speed.
Operating Basics Disclaimer (DVD Super Multi drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product. ■ Any change or loss of the recorded contents of CD-R/RW or DVD-R/ -RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.
Operating Basics ■ When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/+RW discs, it might not be backed up correctly. ■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to use the same type of disc. ■ You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.
Operating Basics 6. Press Capture button. Simplified steps for making a DVD-Video from adding video source: 1. Click All Programs MovieFactory for TOSHIBA Ulead MovieFactory for TOSHIBA Launcher to launch MovieFactory. 2. Click Video Disc New Project to invoke 2nd Launcher, choose your project type, then invoke MovieFactory. 3. Add source from HD Disk by click Add video files button to invoke browser dialog box. 4. Choose the source video then go to Next page to apply Menu. 5.
Operating Basics 2. Before recording the video to DVD ■ When you record DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD. ■ Do not perform any of the following actions: ■ Operate the computer for any other function, including using a mouse to TouchPad or closing/Opening the LCD panel. ■ Bump or cause vibration to the computer.
Operating Basics 4. Hold the CD/DVD by its outside edge or the edge on the centre hole. Fingerprints on the surface can prevent the drive from properly reading data. 5. Do not expose to direct sunlight, extreme heat or cold. Do not place heavy objects on your CD/DVD. 6. If your CD/DVD become dusty or dirty, wipe them with a clean dry cloth. Wipe from the centre out, do not wipe in a circular direction around the CD/DVD. If necessary, use a cloth dampened in water or a neutral cleaner.
Operating Basics Properties menu Click the icon with the secondary mouse button to display properties menu on the screen. Settings You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialling Properties dialog box after selecting region The dialing properties dialog box will be displayed automatically after you select the region.
Operating Basics Connecting To connect the modem cable(optional), follow the steps below. ■ The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 1. Plug one end of the modular cable into the modem jack. 2.
Operating Basics Using the FM tuner The availability of this feature is depending on the model you purchased. 1. Plug the FM tuner antenna into the FM Antenna Jack. FM tuner antenna FM Antenna Jack 2. Select Start All Programs FM Tuner Utility to start FM software. Wireless communications The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices.
Operating Basics Wireless LAN Where present, it supports the A,B, G and draft N standards but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with IEEE802.11 Wireless LAN standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11a/g) ■ Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbit/s.
Operating Basics 2. Multi User: On Windows Vista™, the use of Bluetooth is not supported in a multiuser environment. This means that, when you use Bluetooth, other users logged onto the same computer will not be able to use its Bluetooth functionality. Product Support The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.toshiba.
Operating Basics LAN The computer has built-in support for Fast Ethernet LAN or Giga bit Ehternet LAN (depends on the model you purchased). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.
Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer.
Operating Basics ■ Never transport your computer with ExpressCards installed. This could cause damage to your computer and/or ExpressCard, resulting in product failure. ■ Use the carrying case when transporting the computer. ■ When carrying your computer, be sure to hold it securely so that it does not fall or hit anything. ■ Do not carry your computer by holding protruded portions.
The Keyboard Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, function keys, soft keys, Windows® special keys, and cursor control keys. Typewriter keys The typewriter keys produce the upper- and lower-case letters, numbers, punctuation marks, and special symbols that appear on the screen.
The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. Refer to the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard + Power plan: Displays the power save modes and lets you change the power settings. + Sleep: This hot key switches the system to Sleep Mode. + Hibernate: This hot key switches the system to Hibernate mode. + Output: Changes the active display device. Default resolution for simultaneous mode is set to 1024 × 768. If you connect an RGB (Monitor) that is not 1024 × 768 resolution, change it in "Display Properties". + Brightness (decreases): Turns the monitor brightness down.
The Keyboard + TOSHIBA Zooming Utility (reduce): Reduces the icon size on the desktop or the font size within one of the supported application windows. + TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or the font size within one of the supported application windows. Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility.
Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Power indicators As shown in the above table, the Battery and Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the battery pack. The following indicator lights indicate the battery status: Flashing orange The battery charge is low. The AC adaptor must be connected to recharge the battery.
Power and Power-Up Modes Battery types The computer has the following batteries: ■ Battery pack (6cell or 9cell depending on the model.) ■ Real Time Clock (RTC) battery ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode.
Power and Power-Up Modes Real Time Clock battery The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative.
Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advisories: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
Power and Power-Up Modes Warning 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing. If caustic electrolyte fluid should contact your eyes, immediately wash your eyes with large amounts of running water and seek medical attention, to help prevent eye damage. If electrolyte fluid should contact your skin immediately wash it under running water to prevent rash.
Power and Power-Up Modes Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. After the battery pack is charged, avoid leaving the AC adaptor connected and the computer turned off for more than a few hours at a time. Continuing to charge a fully-charged battery pack can damage the battery.
Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold. If the battery is extremely hot, it might not charge at all. To ensure the battery charges to its full capacity, charge the battery at room temperature of 10° to 30°C (50° to 88°F). ■ The battery is nearly completely discharged. Leave the AC adaptor connected for a few minutes and the battery should begin charging.
Power and Power-Up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ CPU processing speed (depends on the model you purchased) ■ Screen brightness ■ Cooling method (depends on the model you purchased) ■ System Sleep Mode ■ System Hibernation ■ Monitor power off ■ How often and how long you use the hard disk, optical disc. ■ How much charge the battery contained to begin with.
Power and Power-Up Modes 3. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the Battery indicator flashes or there is some other warning to indicate a low battery, go to step 4. 4. Connect the AC adaptor to the computer and the power cord to a power outlet. The Battery indicator should glow orange to indicate that the battery pack is being charged.
Power and Power-Up Modes Battery Release Latch Battery Pack Lock Battery pack Releasing the battery pack Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer.
Power and Power-Up Modes Starting the computer by password If you have already registered a password, there are two ways to start the computer: Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power-on Security. If you would not like to swipe your finger or cannot authenticate the fingerprint for some reasons, push the BACK SPACE key to skip the fingerprint authentication screen.
Power and Power-Up Modes Panel power off/on You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in Sleep Mode or Hibernation Mode but not in boot mode. If the panel power off function is enabled and you use Shut down Windows®, do not close the display until the shut down function is completed. System Auto Off This feature turns the system off automatically if it is not used for a set duration.
HW Setup Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click , All Programs, TOSHIBA, Utilities, HWSetup. HW Setup Window The HW Setup window contains the following tabs: General, Password, Display, Boot Priority, Keyboard, USB and LAN .
HW Setup Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Not Registered Un-registers an existing password Registered Register a new password by following the on screen instructions Owner String This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown. The maximum length is 256 characters.
HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep Mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep Mode. Enabled Enables the Wake-up on Keyboard function. Disabled Disables the Wake-up on Keyboard function (Default). USB USB Keyboard/Mouse/FDD Legacy Emulation Use this option to enable or disable Legacy USB support.
HW Setup User’s Manual 7-4
Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility.
Optional Devices Inserting an ExpressCard One ExpressCard connector is located on the left side of the computer. The computer's hot-install feature lets you install ExpressCard while the computer's power is on. To install an ExpressCard, follow the steps below. 1. Insert the ExpressCard. 2. Press gently to ensure a firm connection. Windows® hot-install feature lets you insert an ExpressCard while the computer’s power is on.
Optional Devices 4. Grasp the extended ExpressCard, and remove it. ExpressCard Removing the ExpressCard SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/ xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/ xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.
Optional Devices Do not insert Memory Stick Duo/PRO Duo into the slot. Data may be lost or damaged if you use any card other than those supported. The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. For more details on using memory cards, see manuals accompanying the cards. The Logo of SD memory card is The Logo of SDHC memory card is . . Installing a memory card To install a memory card: 1. Insert the memory card. 2.
Optional Devices Removing a memory card To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar. 2. Select a device, then click the Stop button. A confirmation dialog may appear, depending on how the device is registered with the system; if so, confirm that you want to remove the device. 3. Gently press the memory card inside the socket to eject it. 4. Grasp the card and remove it.
Optional Devices 5. Do not twist or bend memory cards. 6. Do not expose memory cards to liquids or store in humid areas or lay media close to containers of liquid. 7. After using a memory card, return it to its case. 8. Do not touch the metal part or expose it to liquids or let it get dirty. Memory expansion You can install additional memory in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module.
Optional Devices Memory Module Cover Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Slot A is reserved for main memory. Use slot B for expanded memory. If only one card is installed use slot A. 7.
Optional Devices Points to note about memory module error If you install a memory module that is not compatible with the computer, the Power indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the following ways: ■ If there is only an error in Slot A: repeatedly flashes orange twice, then blue. ■ If there is only an error in Slot B: repeatedly flashes orange, then blue twice. ■ If there is an error in Slot A and in Slot B: repeatedly flashes orange twice, then blue twice.
Optional Devices Latches 1 2 1 Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. Refer to Chapter 6, Power and Power-Up Modes.
Optional Devices When you turn on the power, the Windows® Bootup screen (Windows® Logo) appears on the display device. However, the Windows® Desktop appears on a display device that you used last time to shut down your PC, if the display device exists when you turn on the power. To change the display settings, press Fn + F5. If you disconnect the monitor before you turn the computer off, be sure to press Fn + F5 to switch to the internal display.
Optional Devices HDMI (optional) A HDMI monitor can be connected to the HDMI out port on the computer. 1080p, 1080i, 720p, 576p and 480p signal formats can be supported. But actual signal format you can use depends on HDMI monitor. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not been confirmed, some HDMI monitors may not function properly. 1.
Optional Devices Settings for audio on HDMI To set the audio device to use the HDMI, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click Hardware and Sound. 4. Click Sound. 5. Click Digital Output Device (HDMI). 6. Click the Set Default Device button. To set the audio device to use internal speaker, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click Hardware and Sound. 4. Click Sound. 5. Click Speakers. 6. Click the Set Default Device button. i.LINK (IEEE1394) i.
Optional Devices 5. If you connect/disconnect an i.LINK device to/from another i.LINK device that is currently exchanging data with the computer, data frames might be dropped. 6. Make sure data transfer has ended or turn off the computer, before you: a. Connect/disconnect an i.LINK device to/from the computer. b. Connect/disconnect an i.LINK device to/from another i.LINK device that is connected to the computer. Connecting 1. Make sure the connectors are properly aligned and plug the i.
Optional Devices eSATA (External Serial ATA) An device corresponding to eSATA function can be connected to the eSATA/USB combo port on the computer. Connecting an eSATA device To connect an eSATA device, follow the steps as detailed below: 1. Connect an eSATA cable to the eSATA/USB combo port. Make sure the connector is properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins.
Optional Devices Disconnecting an eSATA device When you have finished using an eSATA device, you can follow the procedures below in order to disconnect it: 1. Wait for the indicator light of an eSATA device to go out to make sure all activity has stopped. If you disconnect an eSATA device or turn off the power while the computer is accessing the drive you may lose data or damage an eSATA device or the drive. 2. Click the Safely Remove Hardware icon on the Windows Taskbar. 3.
Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists.
Troubleshooting ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your CD/DVD/CD-RW is correctly inserted. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster. Analyzing the problem Sometimes the system gives clues that can help you identify why it is malfunctioning.
Troubleshooting Hardware and system checklist This section discusses problems caused by your computer's hardware or attached peripherals.
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and a Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. This section provides checklists for AC power and the battery. If you cannot resolve a problem after following them, the cause could lie with another power resource.
Troubleshooting Problem Procedure Battery doesn’t charge when the AC adaptor is attached (Battery indicator does not glow orange.) If the battery is completely discharged, it will not begin charging immediately. Wait a few minutes. If the battery still does not charge, make sure the outlet of the AC adaptor is supplying power. Test it by plugging in an appliance. Check whether the battery is hot or cold to the touch. If the battery is too hot or too cold, it will not charge properly.
Troubleshooting ■ Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. Refer to your software’s documentation. If you are still unable to use the keyboard, consult your dealer. LCD panel Apparent LCD problems may be related to the computer's setup.
Troubleshooting DVD Super Multi drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a CD/DVD in the drive Make sure the drive's drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording. Do not run or start other software during writing. Do not jar the computer during writing. Do not connect/disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure The response of the TouchPad is too sensitive Adjust the touch sensitivity. 1. Click , Control Panel, Hardware and Sound, then Mouse icon. 2. Wihtin the Mouse Properties window, click the Device Settings tab. 3. Click the Settings button. 4. The Properties for Synaptics Touchpad on PS/2 port screen appears. Double-click Sensitivity in the Select an item section on the left side of the screen. 5. PalmCheck and Touch Sensitivity are displayed. Click Touch Sensitivity. 6.
Troubleshooting Problem Procedure The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentation for instructions on cleaning. If problems persist, contact your dealer. USB Also refer to your USB device’s documentation. Problem Procedure USB device does not work Check for a firm cable connection between the USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed.
Troubleshooting USB Sleep and Charge function Problem Procedure I cannot use the "USB Sleep and Charge function". The setting of "USB Sleep and Charge function" may be [Disabled]. Change the setting to [Enabled] in the HW Setup. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons. When the happens, disconnect an external device if some external devices are connected.
Troubleshooting Problem Procedure External devices connected to the compatible ports do not work when connected to a compatible port. Some external devices may not work when connected to a compatible port when the "USB Sleep and Charge function" is [Enabled] in the HW Setup. Reconnect the external device after turning ON the computer.
Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor’s power switch is on.
Troubleshooting Problem Procedure Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval. A CONNECT display is Check the error control setting in your quickly replaced by NO communications application. CARRIER You can also use the AT\N command.
Troubleshooting Fingerprint sensor Problem Procedure Reading of the fingerprint was not successful Please try again using the correct posture. Refer to Using the fingerprint sensor (FingerPrint sensor is provided with some models) in Chapter 4, Operating Basics. Try the recognition process again using another enrolled finger. The fingerprint cannot be read due to injuries to the finger Try the recognition process again using another enrolled finger.
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first. Before contacting TOSHIBA, try the following: ■ Review troubleshooting sections in the documentation for software and peripheral devices.
Specifications Appendix A Specifications This appendix summarizes the computer's technical specifications.
Specifications Communication specifications User’s Manual Communication System Data: Full duplex Fax: Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90/V.92 103/212A V.17/V.29/V.27ter/V.21 ch2 Communication Speed Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.
Display Controller Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
Wireless LAN Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. Network Operating System ■ Microsoft® Windows® Networking Media Access Protocol ■ CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Data Rate ■ 54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11a/g) ■ 11/5.5/2/1 Mb/s (IEEE 802.
Wireless LAN R-F Frequency ■ Band 2.4GHz (2400~2497 MHz) for 802.11b/g/n (draft version) ■ Band 5GHz (5150~5850 MHz) for 802.11a/n (draft version) Modulation Technique ■ DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK (IEEE 802.11b) ■ OFDM-BPSK, OFDM-QPSK, OFDM16QAMOFDM-16QAM (IEEE 802.11a/g) The range of the wireless signal is related to the transmit rate of the wireless communication device. Communications at a lower transmission rate may travel larger distances.
Wireless LAN When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.
AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe.
Legal Footnotes Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual. Clicking on *XX will display the related description.
Legal Footnotes CPU performance may also vary from specifications due to design configuration. Under some conditions, your computer product may automatically shutdown. This is a normal protective feature designed to reduce the risk of lost data or damage to the product when used outside recommended conditions. To avoid risk of lost data, always make back-up copies of data by periodically storing it on an external storage medium.
Legal Footnotes After going through many charge and discharge cycles, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer. Hard Disk Drive (HDD) Capacity 1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10.
If your computer is stolen Appendix F If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
If your computer is stolen TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite U400) Model number: (e.g. PSU40EYXT) Serial number: (e.g.
Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary GB: gigabyte HDD: hard disk drive HDCP: high-bandwidth digital content protection HDMI: high definition multimedia interface HDMI-CEC: high definition multimedia interface consumer electronics control IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers IMSM: Intel Matrix Storage Manager I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: opti
Glossary A adaptor: A device that provides a compatible connection between two units. For example, the computer's internal display adapter receives information from the software and translates it into images on the screen. An adapter can take a number of forms, from a microprocessor to a simple connector: An intelligent adapter (one that is capable of doing some processing) may also be called a controller.
Glossary boot disk: See system disk. boot: Short for bootstrap. A program that starts or restarts the computer. The program reads instructions from a storage device into the computer's memory. bootable disk: See system disk. bps: Bits per second. Typically used to describe the data transmission speed of a modem. buffer: The portion of the computer's memory where data is temporarily stored. Buffers often compensate for differences in the rate of flow from one device to another.
Glossary click: To press and release the pointing device's primary button without moving the pointing device. In the Windows? operating system, this refers to the pointing device's left button, unless otherwise stated. See also double-click. CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit fabricated on a silicon wafer that requires very little power. Integrated circuits implemented in CMOS technology can be tightly packaged and are highly reliable.
Glossary D data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte. If data bits = 7 the computer can generate 128 unique characters. If data bits = 8 the computer can generate 256 unique characters. data: Information that is factual, measurable or statistical that a computer can process, store, or retrieve. DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries.
Glossary DVD-R (+R, -R): A Digital Versatile Disc-Recordable disk can be written once and read many times. The DVD-R drive uses a laser to read data from the disc. DVD-RAM: A Digital Versatile Disc-Random Access Memory is a high capacity, high performance disc that lets you store large volumes of data. The DVD-ROM drive uses a laser to read data from the disc.
Glossary flash memory: Non-volatile memory that can be written to as well as read. Information in flash memory remains whether or not the computer is receiving power. This type of memory is used to retain your fingerprint data. See also memory. Compare RAM and ROM. floppy diskette drive (FDD): An electromechanical device that reads and writes to floppy diskettes. floppy diskette: A removable disk that stores magnetically encoded data. folder: An icon in Windows used to store documents or other folders.
Glossary I i.LINK (IEEE1394): This port enables high-speed data transfer directly from external devices such as digital video cameras. I/O devices: Equipment used to communicate with the computer and transfer data to and from it. I/O: Input/output. Refers to acceptance and transfer of data to and from a computer. icon: A small graphic image displayed on the screen or in the indicator panel. In Windows®, an icon represents an object that the user can manipulate.
Glossary L L1 cache: Level one cache. Memory cache built into the processor to help improve processing speed. See also cache memory, L2 cache. L2 cache: Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory. See also cache memory, L1 cache. LAN: A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network.
Glossary motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor's basic functions and provides connectors for adding other boards that perform special functions. N network: A collection of computers and associated devices that are connected by communications facilities.
Glossary P parallel: Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Compare serial. parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1.
Glossary R Radio frequency interference (RFI) shield: A metal shield enclosing the printed circuit boards of the printer or computer to prevent radio and TV interference. All computer equipment generates radio frequency signals. The FCC regulates the amount of signals a computing device can allow past its shielding. A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use.
Glossary serial: Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel. SIO: Serial Input/Output. The electronic methodology used in serial data transmission.
Glossary W warm start: Restarting or resetting a computer without turning it off. Wi-Fi®: A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. window: A portion of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft® Windows® window.
Index Index A E AC adaptor, 1-4 additional, 1-15 connecting, 3-2 ASCII characters, 5-4 Equipment checklist, 1-1 Express card inserting, 8-2 removing, 8-2 Expresscard, 8-1 B Battery charging, 6-7 extending battery life, 6-9 indicator, 6-1 location, 2-6 Monitoring capacity, 6-8 real time clock, 1-4, 6-4 safety precautions, 6-5 save mode, 1-10 types, 6-3 Battery pack, 1-4 additional, 8-9 replacing, 6-10 C Cleaning the computer, 4-34 D Display, 1-6 automatic power off, 1-10 brightness decreases, 5-3 brig
Index K Keyboard, 1-7, 5-1 emulating keys on enhanced, 5-2 F1 ...
Index S Security lock attaching, 8-15 Sleep Mode, 1-11 setting, 3-6 System automatic, 1-10 Soft keys emulating keys on enhanced keyboard, 5-2 ScrLock, 5-2 Sound System, 1-8 Headphone(S/P DIF) jack, 1-8 microphone jack, 1-8 mute hot keys, 5-2 T TOSHIBA ConfigFree, 1-14 TOSHIBA Theft Registration, F-2 Touch Pad, 1-7 location, 2-7 using, 4-1 U USB, 1-7 V Video RAM, 1-4 W Wireless communication switch, 4-32 indicator, 4-32 Wireless LAN, 1-9 using, 4-31 User’s Manual Index-3
