Maintenance Manual

4 Replacement Procedures 4.4 HDD
4.4 HDD
Removing the HDD
The following describes the procedure for removing an HDD (See Figure 4-6 to 4-8).
CAUTION: Take care not to press on the top or bottom of the HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws fixing the HDD slot cover and remove the cover by
pressing it in the direction indicated by the arrow.
• M2.5x16 THIN BIND screw x2
M2.5x16 THIN BIND
HDD Slot Cover
Figure 4-6 Removing HDD Slot Cover
4-14 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)