Maintenance Manual

4.8 Keyboard 4 Replacement Procedures
3. Remove the following screws holding the keyboard.
• M2.5×2.8 THIN BIND screw x2
4. Remove the following screw fixing the keyboard hold plate and remove the keyboard
hold plate.
• M2.5×2.8 THIN BIND screw x1
5. Lift the upper side of the keyboard out and turn it face down on the palm rest.
Keyboard Hold Plate
M2.5
×
2.8 THIN BIND
M2.5
×
2.8 THIN BIND
Figure 4-20 Removing Keyboard Hold Plate
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-29