Manualshelf

Maintenance Manual

ManualsBrandsToshiba ManualsPersonal ComputerToshiba Personal Computer A1
231232233234235236237238239240
4 Replacement Procedures 4.9 Optical Drive
Installing the Optical Drive
The following describes the procedure for installing the optical drive (See Figure 4-22, 4-23).
1. Install the side bracket on the CD-ROM drive and fix it with the following screw.
• M2x3 SUPER THIN BIND screw x1
2. Place the CD-ROM holder on the CD-ROM drive and fix it with the following screws.
• M2x17 STEP screw x2
3. Insert the CD-ROM drive assembly into the slot to connect it to PJ1800 on the system
board.
4. Turn the computer face down and fix the CD-ROM drive assembly with the
following screw.
• M2.5x5 THIN BIND screw x1
4-34 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)