Maintenance Manual

4.11 Touch Pad 4 Replacement Procedures
4.11 Touch Pad
Removing the Touch Pad
The following describes the procedure for removing the touch pad (See Figure 4-27).
1. Disconnect the touch pad flexible cable from PJ3201 on the system board.
2. Remove the following screw securing the touch pad.
• M2.5x5 THIN BIND screw x1
3. Remove the touch pad.
M2.5x4 THIN BIND
PJ3201
Touch Pad
Touch Pad Flexible Cable
Figure 4-27 Removing Touch Pad
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-39