Maintenance Manual

4 Replacement Procedures 4.17 Wireless LAN Antenna/Display Cover/Speaker
3. (Wireless LAN models only)
Open the display and peel off four acetate tapes securing the wireless LAN antenna
cables. Remove the wireless LAN antennas. Then unhook the wireless LAN antenna
cables from the guides on the chassis. Turn the display assembly face down and
unhook the wireless LAN antenna cable from the guides.
• M2.5x8 THIN BIND screw x2
Wireless LAN Antennas
A
cetate Tapes
Wireless LAN Antenna Cables
Figure 4-39 Removing Wireless LAN Antennas
4-56 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)