Maintenance Manual

4 Replacement Procedures 4.18 Fluorescent Lamp
2. Remove the four screws on the sides.
Screw loosening torque: 1.2kg
•
cm
Screw
Screw
Screw
Screw
Figure 4-108 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (2)
3. Turn the LCD module face up and remove the bezel (E).
(E) Bezel
(1) Release the bezel from the
four latches of the lamp cover.
(2) Release the two latches (left and
right) on the P-chassis.
(3) Release the hook of the
bezel from the lamp cover.
< Side view >
Hook
Figure 4-109 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (3)
4-114 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)