Maintenance Manual

4.18 Fluorescent Lamp 4 Replacement Procedures
2. Turn the backlight unit face down and install a new lamp unit (R) on the P-chassis.
NOTE: When install the lamp unit (R), be careful not to bend or damage the
reflection sheet.
P-chassis
(R) Lamp unit
Figure 4-118 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (12)
Z
Z
Cross-section drawing of Z-Z
Install the lead wire into this groove.
Install the reflection sheet as it is placed
inside the reflector.
Install the lamp unit without floating.
Figure 4-119 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (13)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-121