Maintenance Manual

4 Replacement Procedures 4.18 Fluorescent Lamp
3. Install the lamp cover (J) on the backlight unit and secure it with the two screws (D).
(J) Lamp cover
(D) Screw
(D) Screw
Screw tightening torque: 1.0kg
•
cm
Figure 4-120 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (14)
4. Install the light guide (M) on the backlight unit.
Insert the light guide straight not to
deform the reflector.
(M) Light guide
Backlight unit
Figure 4-121 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (15)
4-122 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)