Maintenance Manual

4.18 Fluorescent Lamp 4 Replacement Procedures
10. Stick the protection cover G (B), protection cover S (A), fixing tape (C) and fixing
tape for lead wire (C).
Fit the cover according to the outline of the screw.
Stick the tape according to the outline of the
LCD module. Make sure the tape does not
a
pp
ear on the side of the module.
Do not make the tape over the top of the module.
0 to 1 mm
The tape MUST NOT appear on the display.
0 to 0.5 mm
(C)
(C)
(B)
(A)
Figure 4-129 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (23)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-127