Maintenance Manual

4.18 Fluorescent Lamp 4 Replacement Procedures

4. Remove the four bottom hooks and five hooks (left and right). Then remove the top

chassis from the mold frame.

CAUTION: When you release hooks on the top chassis, be careful not to apply

excessive force to the FL. The FL can be damaged easily.

Side hook

Bottom hook

Figure 4-147 Replacing 15.0 Inch Samsung fluorescent lamp (SXGA+) (4)

5. Remove the panel assembly from the mold frame.

Panel assembly

Mold frame

Figure 4-148 Replacing 15.0 Inch Samsung fluorescent lamp (SXGA+) (5)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-141