Maintenance Manual

4 Replacement Procedures 4.18 Fluorescent Lamp
P-chassis
(R) Lamp unit
Figure 4-164 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (12)
NOTE: When install the lamp unit, be careful not to bend or damage the reflection sheet.
Z
Z
Cross-section drawing of Z-Z
Install the lead wire into this groove.
Install the reflection sheet as it is placed
inside the reflector.
Install the lamp unit without floating.
Figure 4-165 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (13)
4-152 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)