Maintenance Manual

4.18 Fluorescent Lamp 4 Replacement Procedures

6. Place the LCD panel (I) on the backlight unit (H).

NOTE: Make sure there is no dust between the LCD panel and backlight unit. If

any dust is found, remove it with crepe tape or others which has no remaining of

paste.

(H) Backlight

unit

(I) LCD panel

Guide rib

Make sure the LCD panel is

installed in the guide rib surely.

Figure 4-169 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (17)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-155