Maintenance Manual

4.18 Fluorescent Lamp 4 Replacement Procedures
4. Turn the LCD module face down and remove the two screws fixing the board. Then
open the bent portion of the TCP of the board and remove the backlight.
Screw
Screw
Screw loosening torque: 1.2kg
•
cm
Figure 4-110 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (4)
Do not hold the edge. Do not hold the edge.
Raise the board and make this condition.
Figure 4-111 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (5)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-115