Maintenance Manual

4.7 Top Cover 4 Replacement Procedures
M2 5x6 black flat head screw.
Latch
Touch pad
board flat cable
Speakers cable
Top cover
CN8
CN9
Figure 4-13 Removing the top cover
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-12, 4-13.
1. Seat the top cover, adjusting its position.
2. Secure the top cover with five M2.5x6 black flat-head screws.
3. Secure the following 15 latches on the top cover, in that order:
- Four Left latches
- Four right latches
- Three front latches
- Four bottom latches
4. Connect the touch pad board flat cables to CN8 on the system board.
5. Connect the speaker cable to CN9 on the system board.
6. Turn the computer upside down and secure it with the following 14 screws:
- Eleven M2.5x6 black flat head screws and three M2x4 black flat head screws.
Satellite L300 / L305/Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual 4-29