Maintenance Manual

4 Replacement Procedures 4.5 HDD
M3x4 black
flat head screw
HDD chassis
HDD
M3x4 black
flat head screw
Figure 4-6 Removing the HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.
Installing the HDD
Install the HDD according to the following procedures and Figures 4-6, 4-7.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Attach the HDD chassis.
2. Secure the HDD and its chassis with the four M2x2 white head screws.
CAUTION: To prevent the HDD bracket from being distorted when installing the HDD
pack into the computer, do not press the center of the HDD pack. Always hold the HDD
pack by its sides.
3. Install the HDD pack into the correct position in the computer. Connect the HDD
pack to the computer, holding the HDD pack by its sides.
4. Insert the HDD pack.
5. Secure the HDD cover by tightening the HDD cover screw.
4-18 Satellite/Satellite Pro/L650 Maintenance Manual