Maintenance Manual

4 Replacement Procedures 4.9 Top Cover

4.9 Top Cover

Removing the Top Cover

Remove the top cover according to the following procedures and Figures 4-11 and 4-12.

Turn the computer upside down and remove the following 19 screws:

- Fifteen M2.5x6 black flat head screws.

- Four M2x2 black flat head screws.

M2 5x6 black flat head screw.

M2x2 black flat head screw

M2 5x6 black flat head screw.

Figure 4-11 Removing the screws from the bottom of the computer

2. Turn the computer right side up.

3. Disconnect the touch pad board flat cable from CN250.

4. Disconnect the power board cable from CN252.

5. Disconnect the speaker cable from CN600.

6. Lift up the top cover.

4-26 Satellite/Satellite Pro/L650 Maintenance Manual