Maintenance Manual

4.9 Top Cover 4 Replacement Procedures
Latch
Top cover
Speaker cable
Touch pad
board flat cable
Power board cable
CN250
CN252
CN600
Figure 4-12 Removing the top cover
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-11, 4-12.
1. Seat the top cover, adjusting its position.
2. Connect the touch pad board flat cables to CN250 on the system board.
3. Connect the power board cable to CN252 on the system board.
4. Connect the speaker cable to CN600 on the system board.
Turn the computer upside down and secure it with the following 19 screws:
- Fifteen M2.5x6 black flat head screws.
- Four M2x2 black flat head screws.
Satellite/Satellite Pro/L650 Maintenance Manual 4-27