Maintenance Manual

4 Replacement Procedures 4.14 CPU
Installing the CPU
Install the CPU according to the following procedures and Figures 4-20, 4-21, 4-22 and
4-23.
1. Stick CPU mylar and check that the triangle on the cam is in the unlock position.
2. Attach the CPU to the correct position in the CPU socket. Align the CPU with the
CPU socket by using the triangle as a guide.
Figure 4-22 Installing the CPU
3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver.
CAUTION: Seat the CPU by aligning the triangle with the shaded area.
4--40 Satellite/Satellite Pro/L650 Maintenance Manual