Maintenance Manual

2.5 HDD 2 Troubleshooting
Procedure 4 Test Program Check
Run the HDD test program stored on the maintenance test program disk for all test items.
See Chapter 3 for details on how to use the test program.
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and their status names are listed in Table 2-1. If an error code is not generated
and the problem still exists, go to Procedure 5.
Table 2- 1 HDD Error Code and Status
Code Status
1 Get Parameter Fail !
2 Read Old Data Error
3 Write Pattern Error
4 Read Back Data Error
5 Data Compare Error
Restore Data Erro
r
6
7 Read Verify Error
9 Seek Error
10 Disk Controller Self Test Failed
11 Disk Controller Test unexpected interrupt Failed
Disk Controller action Test Failed12
Disk dos not support SMART13
Disk read attribute threshold erro
r
14
15 Disk read attribute value error
Disk SMART attribute value error16
Satellite/Satellite Pro/L650/L655 Maintenance Manual 2-13