Maintenance Manual

2 Troubleshooting 2.6 SSD

Procedure 1 Test Program Check

Run the Storage test program stored on the maintenance test program disk for all test items.

See Chapter 3 for details on how to use the test program.

If an error is detected during the SSD test, an error code and status will be displayed. The

error codes and their status names are listed in Table 2-2. If an error code is not generated

and the problem still exists, go to Procedure 2.

Table 2- 2 SSD Error Code and Status

Code Status

Get Parameter Fail !

Read Old Data Error2

Write Pattern Error3

Read Back Data Error4

Data Compare Error5

Restore Data Erro

7 Read Verify Error

Seek Error

10 Disk Controller Self Test Failed

11 Disk Controller Test unexpected interrupt Failed

Disk Controller action Test Failed12

Disk dos not support SMART

Disk read attribute threshold erro

15 Disk read attribute value error

Disk SMART attribute value error16

2-16 Satellite/Satellite Pro/L650/L655 Maintenance Manual