User manual

Do not remove the battery pack while the computer is in Sleep Mode,
as data is stored in RAM, so if the computer loses power it might be
lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Do not unlock the battery pack while carrying the computer or the
battery pack might fall out and cause injuries.
Removing the battery pack
To remove a discharged battery, do the following:
1. Save your work.
2. Click Start -> (Power) and then click Shut down while holding
down the SHIFT key. Ensure that the Power button ring LED is off.
3. Remove all cables and peripherals that are connected to the
computer.
4. Turn the computer upside down.
5. Slide the battery lock into its unlocked (
) position.
6. Lift the battery pack up to remove it from the computer.
Figure 4-2 Releasing the battery pack
1
2
1. Battery lock 2. Battery pack
Installing the battery pack
To install a battery pack, do the following:
Do not unlock the battery pack while carrying the computer or the battery
pack might fall out and cause injuries.
1. Insert the battery pack as far as it will go into the computer.
2. Ensure that the battery pack is securely in place and the battery lock is
in its locked (
) position.
3. Turn your computer over.
User's Manual
4-8