User manual

Installing a SIM card
To install a SIM card, do the following:
1.
Click Start ->
(Power), and then select Shut down and ensure that
the Power button ring LED is off
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Turn the computer upside down and remove the battery pack.
4. Locate the SIM card slot.
5. To pop the SIM card tray partially open, insert a slender object (about
10mm, diameter 0.8mm), such as a straightened paper clip, into the
eject hole. Gently pull to open the SIM card tray.
Nevel pull the SIM card tray completely out of the slot.
6. Place the SIM card into the SIM card tray with the metal connectors
facing down.
7. Insert the SIM card tray into the SIM card slot, and push the center of
the tray to close it. Press gently until it locks into place.
8. Install the battery pack.
Figure 4-5 Installing the SIM card
Nano SIM
1
2
3
4
1. SIM card slot 3. SIM card tray
2. Slender object (Diameter 0.8mm) 4. SIM card
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.
Do not touch the connectors on the SIM card or on the computer.
Debris on the connectors might cause access problems.
User's Manual 4-12