Instruction Manual

Basic Skills
User's Manual 2-5
TOSHIBA Pocket PC e750 Version
1
Last Saved on 17/02/2003 14:46
ENGLISH using Euro_C.dot –– Printed on 17/02/2003 as e750
Wireless Communication Switch (Wireless LAN model only)
1 To enable Wireless module, make sure the Wireless Communication
Switch is turned on. (The default setting is Power Off. Slide the switch
to the left to turn the power on.)
2 If this is your first time turning on the switch, the IP Address Page will
pop up for you to set the IP address, Subnet mask and Default
gateway.
Wireless LED Descriptions
LED indicates the different status:
Off Wireless Communication Switch is turned OFF
Orange Wireless Communication Switch is turned ON
Wireless Communication Switch
(On ←→ Off)