Manual

Chapter 12: Additional Information
211
F4: The Wireless LAN consumes too much power. What should I do
to save power?
(1) Turn off the Wireless LAN Switch if you are not using the Wire-
less Network currently, or
(2) Tap Turn radio off on the TMU icon.
(3) Tap Start, Settings, System, then Wireless LAN Manager. On
the Power tab, set each power saving mode, then tap Apply.
F5: How do I make sure that the Wireless LAN software has been
installed successfully and that Wireless LAN already work prop-
erly?
(1) Please check if the “IEEE 802.11b WLAN Adapter” already exist
in Start, Settings, Connections, Network Cards, then Net-
work Adapters tab; if not, the Wireless LAN Driver is not
Installed successfully.
(2) Please check if the Wireless LAN Utility already exist and could
be opened successfully by simply tapping Start, Settings, Sys-
tem, then Wireless Networks.
(3) Tap Start, Settings, System, Wireless LAN Manager, then
Link to check the current Link information.
(1) Turning off the Wireless Communication Switch will
cause the disconnection of the Wireless Network,
please make sure to close all the Wireless Connection
before you execute this function.
(2) The Turn Off function on the TMU icon causes the dis-
connection of the Wireless Network, please make sure
to close all the Wireless Connection before you exe-
cute this function.
(3) Enable “Power Saving Mode” keeps the connectivity
but lowers the average throughput due to longer con-
nection period for the Wireless Network.
(4) If you are in 802.11 Ad Hoc Mode, you are not allowed
to enable “802.11 Power Saving Mode”, because Ad
Hoc Mode doesn’t support this function.
NOTE